I've just repaired a leaking O ring on the flush pipe of a concealed toilet system. The job took 15 mins but took over 3hrs to get access to the back of the toilet! The worktop had been fitted & tiled on leaving no access to the back of the toilet! Nightmare! Another great video from plumberparts!
We have a leak under toilet and access is very tight. Looks like small leak for a few tears that has now found a way into floor above sitting room. The cistern is completely tiled in, no access except for pulling out toilet unit. The clean flush water pipe connection to toilet is where the leak is. The end of the pipe was cut off unevenly. I have made that smooth and lubed up the connection but no access to push pipe in the only way is to line it up and push in toilet unit. I think it is not making a good connection still. So . . I'm starting to take off tiles! Great fun, kind of.
@@JamesColemanLikesWind You have my sympathy! I reassembled the bathroom vanity units & worktop to give easier access in the event of it leaking again.
I have one of these enclosure units and unfortunately I cannot change my toliet seat cannot figure out how to acsess underneath the toliet where the seat bolts underneath nightmare
Thanks for these great videos - I'm a DIYer who is just in the process of ripping out a early 80's bathroom and putting in a new state of the art one - your help and advise has been a godsend - do you have a vid on fitting a steam shower ?
Hi mate I have learned a lot watching your video and taken up my bathroom project which is nearly finish. I just wanted to ask you quick question regarding boss strap you use for basin what size hole cutter you use please. Many thanks
Hi mate I found the answer to my question on TH-cam as I presume you must be busy. The hole cutter size is 54mm to use please don’t make a mistake of using 56mm.
Yeah I usually do too, but changed method for this job to see if it will work. They're only down the road so any problems I'll know straight away. As it happens, all ok at the moment!
Hi just started to re-do my toilet I've been looking at your vids for some time one shows you cutting the collar on a cast iron soil pipe is it still available ? I cant find it is there a ref. number just to make it look neater thanks Ray bennett
Hi I'm swapping a built in back to wall pan tomorrow and don't want to have to damage the granite fitted on top over the valve. Can I remove the pan and put a new one in without turning off the water. ... your video seems to support that xxx
Is there a video on how to adjust toilet flush volume on the same cistern whilst the toilet is in position, is it just twist the valve and pull it out? Unsure if I can get it back in without being able to see in to it , worktop is fixed in position and bathroom is finished thanks
Hope you like guys! Was on a job so thought I'd film how I got over this! PLEASE follow me on Instagram www.plumberparts.co.uk/social.php?social=Instagram I would have used a toilet elbow with integral boss but didn't have one on the van! Sorry! Also was a bit naughty installing the multquick into the elbow without a 110 sleeve, but all is well and there's no leaks!
plumberparts Nicely done James ! Accurate job - however slightly doubting about flexible filler pipe - it looks overbended a little bit - I think shorter pipe would be a better choice... or even copper pipe with threaded fitting.
I just fitted a floating toilet and it appears to be leaking ever so slightly from the flush pipe, I suspect its the rough surface of the porcelain, any tips how to stop it? Could i put plumber maite inbetween the ribs of the rubber seal?
Good tip on the ‘strap on boss’ installation. I’ve had a few of the solvent weld boss’s not take properly before and couldn’t figure out why. I’ve seen in various USA videos they usually use a primer the pipe with a solution before the solvent weld, but that doesn’t seem that common in the UK I’ve found.
you are supposed to use a cleaner but people rarely do, i recon the reason the strap on boss may not take too well is because your just pushing them together and thats it , unlike a pipe and socket where you twist them together which allows both the socket and pipe material to fuse into each other , otherwise your just putting glue on the top and allowing it to dry ....
Hey mate ... Where can I purchase a concealed cistern with 90 degree bend flush pipe or just the pipe on its own (38/40mm) as yours on here instead of a long swept bend? Got a fluid master to replace an original unit and sits above the cabinet worktop height even when cut to its minimum towards the bend ..... help can’t make the misses flush the no.2s with a bucket for much longer !! 😂🤣
How do you fix the toilet to the floor after finishing everything else? I would have thought preparations for the fixings should have been done before.
Great video. I'd like to fit one in my bathroom but my 4" waste pipe runs across , am I able to cut enough out of the sink vanity unit to allow the 4" waste to run through it?? I can't have the sink/ toilet the other way round as the space doesn't allow it
How do you actually position the clips to mount them to the floor, my toilet has some weird side mounting clips that sit inside the pan and I can’t find a video to Install them
Hey ... that flexi is designed to go inside the soil pipe not into an elbow..That elbow should have a small amount of soil pipe inserted AND then your flexi pushes inside that small piece of soil pipe. It gives a tight fit as it was designed for. Mate I believe this is the only error I have seen you make. Please come back to me. Regards Don
Hello mate, thanks for the video. What do you think of those pan connectors that have the built on waste boss??? Thanks in advance - I'm holding tight!
I've got a unit like this and it's leaking a tiny bit from the bottom where it is sealed to the floor, any tips or ideas on how to fix or what the issue may be please?
Hi, can anyone please tell me where I can buy the adjustable legs that fit on the inside of the cistern cabinet carcass that has no base? I cant find them anywhere. Many thanks.
try doing that when the concealed toilet is tiled and no mention of the pan fitting kit!!!.. good vid for tips for some tho. but lifting toilet over pan fixings while trying to connect the flush and waste pipe can be a proper ball ache on a tiled boxing. I love removable panels on the back of toilets ... im proper old school!!!!.. but good entertaining vid none the less .. well done!!!!
Yeah I usually do too, but changed method for this job to see if it will work. They're only down the road so any problems I'll know straight away. As it happens, all ok at the moment!
James man.... fix sounds like repair. Fit seems more appropriate... tut tut 😂 I remember the " this stuff is cheap, leaks are expensive " saying... So true
So you didn’t fit a floor pan kit to the floor before you pushed it all in. Or do you not bother with those? In which case the customer is left with the two holes in the side of the toilet pan!?
The question is how do I access the concealed cistern toilet once it is installed. Basically the big button does not flush the toilet anymore only the small one. What could be causing this?. Trouble is a cremaic tabor vanity basin is fitted on top. Would I need to remove the whole unit just to get to the Toilet. Or just remove the sealent and the two pieces?
I'd have to argue I save a lot more time fitting the occasional item twice than reading every instruction manual thats not to say you shouldn't. but further to that if you plan a job based on the spec sheet and instruction manual without actually physically inspecting the product, you are gonna have a lot of problems and a hard life.
James or anyone that can help. I have water feeding back through to the toilet from the pipe that connects the toilet with soil pipe. We have a dirty brown coloured water in the toilet every morning. Thanks in advance
Just watched a couple of your videos and like your energy and delivery so decided to subscribe. I'm planning to refurb our family bathroom and your vids will come in handy.
love your vids sooooo helpful BUT puhleez cut the background music at least while your talking..so aggravating..are ok so its only at the beginning 😉 forgiven
*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts
Plus, follow my *Vlog “TimesWithJames”:* th-cam.com/users/timeswithjames
Just bought my first house and I’m doing the kitchen and bathroom all DIY. your videos are a god send! And yes, I filled the kettle first
Hi mate, I'm currently doing my own bathroom and your videos have been so helpful, just subscribed! Great content
I've just repaired a leaking O ring on the flush pipe of a concealed toilet system. The job took 15 mins but took over 3hrs to get access to the back of the toilet! The worktop had been fitted & tiled on leaving no access to the back of the toilet! Nightmare! Another great video from plumberparts!
We have a leak under toilet and access is very tight. Looks like small leak for a few tears that has now found a way into floor above sitting room. The cistern is completely tiled in, no access except for pulling out toilet unit. The clean flush water pipe connection to toilet is where the leak is. The end of the pipe was cut off unevenly. I have made that smooth and lubed up the connection but no access to push pipe in the only way is to line it up and push in toilet unit. I think it is not making a good connection still. So . . I'm starting to take off tiles! Great fun, kind of.
@@JamesColemanLikesWind You have my sympathy! I reassembled the bathroom vanity units & worktop to give easier access in the event of it leaking again.
I always use a piece of soil pipe in the bend to make any slack up when fitting the Flexi
Hi, do you have videos showing how to install toilet with the waste go under the toilet instead of on the back of the toilet?
I have one of these enclosure units and unfortunately I cannot change my toliet seat cannot figure out how to acsess underneath the toliet where the seat bolts underneath nightmare
I always watch your video. You explain every stage very clearly.well done
Thanks for these great videos - I'm a DIYer who is just in the process of ripping out a early 80's bathroom and putting in a new state of the art one - your help and advise has been a godsend - do you have a vid on fitting a steam shower ?
Could do with steam shower info myself!
So many of your videos help me- this was another. Thanks so much
Hi mate I have learned a lot watching your video and taken up my bathroom project which is nearly finish. I just wanted to ask you quick question regarding boss strap you use for basin what size hole cutter you use please. Many thanks
Hi mate I found the answer to my question on TH-cam as I presume you must be busy. The hole cutter size is 54mm to use please don’t make a mistake of using 56mm.
Good video but was always told never to put pan connector in to socket, should go straight in 100mm. What you think?
Yeah I usually do too, but changed method for this job to see if it will work. They're only down the road so any problems I'll know straight away. As it happens, all ok at the moment!
its only a matter of time!
We always cut a sleeve for the socket
Should you have pushed the O ring seal on the flexi WC pan connector straight into the soil pipe bend without a 110mm off cut pushed in first?
Can a pan connector flange go directly into a push fit socket?
And can you use a push fit coupler with an existing piece of 110m?
Hi just started to re-do my toilet I've been looking at your vids for some time one shows you cutting the collar on a cast iron soil pipe is it still available ? I cant find it is there a ref. number just to make it look neater thanks Ray bennett
Hi I'm swapping a built in back to wall pan tomorrow and don't want to have to damage the granite fitted on top over the valve.
Can I remove the pan and put a new one in without turning off the water. ... your video seems to support that xxx
Not a fan of those flexi pan connectors. You could have got away with a straight pan connector? Neat job though.
Cistern outdoor overflow no longer needed on these new concealed ones?
was the grey coloured elbow that the toilet flexi pipe went into a 90 degree or 92.5 degree elbow? thanks
Is there a video on how to adjust toilet flush volume on the same cistern whilst the toilet is in position, is it just twist the valve and pull it out? Unsure if I can get it back in without being able to see in to it , worktop is fixed in position and bathroom is finished thanks
Do you ever use those weird things you get with the toilet to screw it down to the floor, or just silicone??
Another nice video, ta. Quick question, are those 90 degree horizontal bends generally safe? wouldn't it obstruct the flow?
Hope you like guys! Was on a job so thought I'd film how I got over this! PLEASE follow me on Instagram www.plumberparts.co.uk/social.php?social=Instagram I would have used a toilet elbow with integral boss but didn't have one on the van! Sorry! Also was a bit naughty installing the multquick into the elbow without a 110 sleeve, but all is well and there's no leaks!
plumberparts Nicely done James ! Accurate job - however slightly doubting about flexible filler pipe - it looks overbended a little bit - I think shorter pipe would be a better choice... or even copper pipe with threaded fitting.
plumberparts Excellent video, easy to follow... nice watch, what brand??
Think that's a Diesel!
Plumb-Dawg have you ever used one of these? 'Aladdin EasyFit Isolator'
plumberparts in
Looking to upgrade my toilets, found this useful
ok great video ! is the cysten described by the makers as a front access one ? Thanks
I just fitted a floating toilet and it appears to be leaking ever so slightly from the flush pipe, I suspect its the rough surface of the porcelain, any tips how to stop it? Could i put plumber maite inbetween the ribs of the rubber seal?
Good tip on the ‘strap on boss’ installation. I’ve had a few of the solvent weld boss’s not take properly before and couldn’t figure out why. I’ve seen in various USA videos they usually use a primer the pipe with a solution before the solvent weld, but that doesn’t seem that common in the UK I’ve found.
Just for your interest , I work with industrial plastic pipe and its always cleaned with a cleaner , don't know why this doesn't apply to domestic .
you are supposed to use a cleaner but people rarely do, i recon the reason the strap on boss may not take too well is because your just pushing them together and thats it , unlike a pipe and socket where you twist them together which allows both the socket and pipe material to fuse into each other , otherwise your just putting glue on the top and allowing it to dry ....
In the US, primer makes a big difference on PVC and is required by some building codes, almost a guarantee to have problems if you don’t
Hey mate ... Where can I purchase a concealed cistern with 90 degree bend flush pipe or just the pipe on its own (38/40mm) as yours on here instead of a long swept bend? Got a fluid master to replace an original unit and sits above the cabinet worktop height even when cut to its minimum towards the bend ..... help can’t make the misses flush the no.2s with a bucket for much longer !! 😂🤣
How do you fix the toilet to the floor after finishing everything else? I would have thought preparations for the fixings should have been done before.
What do you do if one of the flush buttons stop coming back out fully? Like the big one on mine only comes out half way now.
Great video. I'd like to fit one in my bathroom but my 4" waste pipe runs across , am I able to cut enough out of the sink vanity unit to allow the 4" waste to run through it??
I can't have the sink/ toilet the other way round as the space doesn't allow it
How do you actually position the clips to mount them to the floor, my toilet has some weird side mounting clips that sit inside the pan and I can’t find a video to Install them
Flush is being a frikin nightmare on this one I'm doing. Just can't get it to not spitting out of the back where the flush cone goes
Thanks for the video. Which sealant did u use? Not CT1
How far into the pan do you push the pipe through the flush cone?
Hey ... that flexi is designed to go inside the soil pipe not into an elbow..That elbow should have a small amount of soil pipe inserted AND then your flexi pushes inside that small piece of soil pipe. It gives a tight fit as it was designed for. Mate I believe this is the only error I have seen you make. Please come back to me. Regards Don
What does the return pipe do, is it like an overflow, breather or suchlike??
Can we connect toilet plastic sewage pipe to old cast-iron pipes or do we have to replace all the system
Great video, what size hole saw did you use for the strap on please?
Thank Chris
Hello mate, thanks for the video. What do you think of those pan connectors that have the built on waste boss??? Thanks in advance - I'm holding tight!
Shouldn't the title say 'FIT' not 'FIX' a concealed toilet?
Do one with a tiled in concealed cistern. They can be a nightmare!
Wouldnt you have to of disconnected the toilet again anyway to fix it to the floor with the brackets?
What make is your quick release hole cutter, and where can I purchase one, thanks, always enjoy your videos
I've got a unit like this and it's leaking a tiny bit from the bottom where it is sealed to the floor, any tips or ideas on how to fix or what the issue may be please?
Could be cistern leaking from the bottom, water supply connection, cistern overflowing, flush bung leaking, pan connector leaking check them all
Exactly what I was looking for great video 👏👏👏
Hi, can anyone please tell me where I can buy the adjustable legs that fit on the inside of the cistern cabinet carcass that has no base?
I cant find them anywhere. Many thanks.
try doing that when the concealed toilet is tiled and no mention of the pan fitting kit!!!.. good vid for tips for some tho. but lifting toilet over pan fixings while trying to connect the flush and waste pipe can be a proper ball ache on a tiled boxing. I love removable panels on the back of toilets ... im proper old school!!!!.. but good entertaining vid none the less .. well done!!!!
shouldn't you have some 4" in that elbow for the pan connector?
Yeah, fins on fins is not a good thing, sleeve with a bit of 110 soil.
I don’t normally reply on stuff like this. But you’re absolutely right. Small piece of four-inch to take up a proper seal.
I would defo sick a bit of 110mm in that socket, especially as it's gonna be concealed.
Was thinking that too.... and silicone on a strap on? Is that a thing now?
Yeah I usually do too, but changed method for this job to see if it will work. They're only down the road so any problems I'll know straight away. As it happens, all ok at the moment!
on a shower waste is 1"1//4 ok or is 1"1/2 better ?
What quick release arbor are you using in this video? Does it work with any hole saw?
Are offset pan connectors ok to use?
Wait, how did you fill up the cistern to test it? Why didn't it all run out of the hole in the bottom??
Is there not an issue with condensation in the enclosed space?
What about a air vent for your toilet so no gurgling? I'm trying to solve this problem & want to join one on the elbow due to limited access ??
He's already fitted a durgo valve inside in the void stack !!!
I like your videos. Instructional and entertaining. Just subscribed
James man.... fix sounds like repair. Fit seems more appropriate... tut tut 😂 I remember the " this stuff is cheap, leaks are expensive " saying... So true
Hi great video but what is gunkday?
So you didn’t fit a floor pan kit to the floor before you pushed it all in. Or do you not bother with those? In which case the customer is left with the two holes in the side of the toilet pan!?
You always want lube on your rubber, Don't let anyone tell you any different.
Did you bring a track to the job site? That was a slick camera pan in your first shot of the video.
The question is how do I access the concealed cistern toilet once it is installed. Basically the big button does not flush the toilet anymore only the small one. What could be causing this?. Trouble is a cremaic tabor vanity basin is fitted on top. Would I need to remove the whole unit just to get to the Toilet. Or just remove the sealent and the two pieces?
80's Lad bit late reply but you’ll be able to access the cistern through the front 2 vanity unit pieces allowing you to work on the cistern
Hi James. The tool that you used to cut plastic pipe looks really quick and easy to use. What is its exact name please?
Wood saw with a fine tips
Great informative info as usual! Thank you
Was your slip ring split?
What’s the holsaw size please
loved the video
i was hoping to do the same thing with my bathroom basin but thought the smell of the wast pipe would come up through the plug hole
this is prevented by means of a basin waste water trap.
Hi mate I noticed that hole saw kit u use is on another level!!! Which brand n make is it? Pls hit me up I’m a big fan 👨🏾🔧🤜🏾🤛🏻💯
Milfaulty
@@cococooley2589 🤣
I'd have to argue I save a lot more time fitting the occasional item twice than reading every instruction manual thats not to say you shouldn't. but further to that if you plan a job based on the spec sheet and instruction manual without actually physically inspecting the product, you are gonna have a lot of problems and a hard life.
James or anyone that can help. I have water feeding back through to the toilet from the pipe that connects the toilet with soil pipe. We have a dirty brown coloured water in the toilet every morning. Thanks in advance
What was the make of cistern you fitted in this video?
Can you do a video on 10mm to 15mm adapters please.
Excellent.
Nice video mate, love the watch to 😍😍😍😍
Not sure why you're using silicon instead of the correct cement?
Was the toilet seat top fit........
Currently sat on the loo watching this video.
I have flexi that just pops off the spigot all the time, doesn’t inspire confidence😩
Take it the Pan is just getting the good old Silicone Jobby to fix it to the Floor?
Good work!
You really like your job.
Well this video panned out well in the end , Boo laka sharrrrr!
very good
good
why bodging a T-connector? You can buy the T factory-molded as a single plastic piece.. no leakage risk...
Cheaper aswell
Hi do you have a link to one of these please? Thanks
@@Chris-uu6dg look at Amazon...
E.g.
www.amazon.de/s?k=abflussrohr+t+st%C3%BCck&sprefix=abflussrohr+t&ref=nb_sb_ss_ts-a-p_2_13
Are you talking about the boss? I don't really see what the leakage risk is anyway in that situation since it's top entry.
@@nobodydoesithalfasgoodasyou 1 ) you know that silicone doesnt stick to PP pipes? 2) you know what sewer gas is?
Any videos showing standard sizes of each pipe for each situation?
Fantastic video, big help for me!!
Thanks a lot Jimmy
Are u from Manchester?
Just watched a couple of your videos and like your energy and delivery so decided to subscribe. I'm planning to refurb our family bathroom and your vids will come in handy.
Fantastic
Why not use a 4" tee with a 1 1/4" reducer for waste and soil instead of the strap on boss , 😉
So if your fooling around in the bathroom, lube your rubbers ribbed or another wise !
That setup is a pig if eventually the float valve leaks and needs replacing
Tut tut. Flexi pan cons are for diy-ers
He clearly is a diy-er
You funny! 😂😂😂
@@plumberparts
Your "plumbing" certainly is.
@@addloosta wow. This Twitter? 🍑🍆
@@plumberparts you carry on pretending with your little videos son and leave the big work for the lads who know their shit.
Shame it will all have to come out again for the useless pan floor brackets! 😩
never fit the white hard plastic brackets that come with some pans, fischer all the way.. love those brackets
I love it this job
Like how you talk so much about flexi friday, and then use flex connector for the toilet - in UK :D
Yeah I know mate! Sometimes you've just got too!
ummm wheres the toilet seat?
Fairy liquid rots the rubber
love your vids sooooo helpful BUT puhleez cut the background music at least while your talking..so aggravating..are ok so its only at the beginning 😉 forgiven