The way you explain everything and go so in depth in these is more valuable than you imagine. Thanks allot and keep killin it with everything you do man. Much respect
This series is great. Perfect timing for as I’m putting my FXR back together after sorting the gearbox and engine. After doing those engine and gear box stabilisers it would be good to see you guys as an expert aligning the engine and trans in the frame. Mainly so I don’t stuff it up when I have to do it. Keep up the good work.
After 18 months on my 85th Anniversary FXRS.. always looking for good FXR-specific technical content. Very visceral experience, riding one of these for daily duty. #jesuslovesloctite
This series is awesome. I'm currently building My 93 FXR as well. I'm waiting for my wheels to get back from chrome so I can send the bike to TuckerSpeed for my wiring Harness. I went with the Motogadget M unit Blue with the Motogadget M Button. I'm excited for the progress.
You’re going to absolutely hate that alloy art motor mount. Had one in mine for a week and threw it in the trash. Either get a stock Barry mount or a kinetic.
I'm putting on a new Drag Spec. Heavy Duty Motor Mount on a 2000 Road King right now. The old one does not look that bad actually . Some videos show loosely tightening the Bolts and starting so it settles in to the sweet spot . And then tighten. Is that necessary ? I also may replace the stabilizer while I have everything torn down . When I was raising Engine I left stabilizer attached and worried the right hand side may have gotten raised to high .
This series is so great! I have a question. 26:13 I tried to install the same alloy art Motor Mount but I think it is too thin for the stock bolt. Is this bolt a stock? Do you use a collar on the stock bolt to adjust it? Please let me know.
If it didn't do it when it was new, then those braces, and dampeners aren't going to actually fix the problem. Infact they may exacerbate the problem, while masking the symptoms.
My 2010 Superglide rear skates around really bad when turning and accelerating onto the Highway. I think it comes down to a bad design. Swingarm attached to a rubber mounted Engine/Transmission not the frame? Face palm...
![เขามัทรี - เอ็กซ์ ศุภกฤต - จอนนี่มิวสิค [ Official MV ]](http://i.ytimg.com/vi/AS9ufKuQIVs/mqdefault.jpg)
The way you explain everything and go so in depth in these is more valuable than you imagine. Thanks allot and keep killin it with everything you do man. Much respect
Appreciate it! 🍻
Great advice about doing one thing at a time when there are multiple dimensions that need to be put together correctly. You have great shop practices.
I always watch these start to finish. Stay with it and you’ll have a top channel in a few years.
This series is great. Perfect timing for as I’m putting my FXR back together after sorting the gearbox and engine.
After doing those engine and gear box stabilisers it would be good to see you guys as an expert aligning the engine and trans in the frame. Mainly so I don’t stuff it up when I have to do it.
Keep up the good work.
After 18 months on my 85th Anniversary FXRS.. always looking for good FXR-specific technical content. Very visceral experience, riding one of these for daily duty. #jesuslovesloctite
Ok, that settles it. I'm upgrading my mounts, front and rear. Thanks for the video!
Great content !!!!! Keep ‘em coming !!!! Very informative!
Great info, thanks!! Winter project.
Awesome job a lot of good useful information 👍
🍻🍻
What an awesome video.
Thanks
This series is awesome. I'm currently building My 93 FXR as well. I'm waiting for my wheels to get back from chrome so I can send the bike to TuckerSpeed for my wiring Harness. I went with the Motogadget M unit Blue with the Motogadget M Button. I'm excited for the progress.
You’re going to absolutely hate that alloy art motor mount. Had one in mine for a week and threw it in the trash. Either get a stock Barry mount or a kinetic.
Agreed. I'd like to hear how Iron Anchor likes it. I run the Kinetic
Excellent video need to do the same thing to my scoot
I don’t even own a FXR ……..yet
But I’m watching this series lol
Awesome 👏🏼 right trying to get a hold of a Fxr frame I have a spare Dyna motor I want to put in it .. hot rod a bit motor it is…😂👍🏼🍺
I installed the Alloy Art Frame Brace on my 2021 HARLEY DAVIDSON RGS, Highly Recommend Alloy Art Products!
I'm putting on a new Drag Spec. Heavy Duty Motor Mount on a 2000 Road King right now. The old one does not look that bad actually . Some videos show loosely tightening the Bolts and starting so it settles in to the sweet spot . And then tighten. Is that necessary ? I also may replace the stabilizer while I have everything torn down . When I was raising Engine I left stabilizer attached and worried the right hand side may have gotten raised to high .
I thought the alloy art front motor mount was way too stiff. I swapped mine out for a Glide Pro. Much smoother ride.
This series is so great!
I have a question. 26:13 I tried to install the same alloy art Motor Mount but I think it is too thin for the stock bolt.
Is this bolt a stock? Do you use a collar on the stock bolt to adjust it? Please let me know.
Have you ever heard of kinetic structures? I love and have purchased Alloy Arts Parts but the amount of R&D Kinetic has put into their mount is 🤯
Did you get more vibration in the handle bars and foot pegs using the Kinetic Structures mount?
@@HensonLoggingCompany no.
Predator is another one
When it comes to Dynas there's really no debate tho, Sputhe kits are tried and true. That's always the first thing to go on any Dyna I touch
That’s an FXR. Completely different. So. Yea. But not here.
Hallo what is the brand of the front mount?
😊
If it didn't do it when it was new, then those braces, and dampeners aren't going to actually fix the problem. Infact they may exacerbate the problem, while masking the symptoms.
My 2010 Superglide rear skates around really bad when turning and accelerating onto the Highway. I think it comes down to a bad design. Swingarm attached to a rubber mounted Engine/Transmission not the frame? Face palm...
that alloy art motor mount is garbage. you’re adding vibration, if anything.
Your absolutely right about that motor mount !
That's what I've heard... =/
23:06
It’s 2022. You can’t say “drag”.
Look it’s a good series, but damn bro you’re long winded. More action with voice over would serve you better.