Just installed your plate for the holosun 507c - the plate is the trijicon plate - works for both - I installed it - looks good - will try it at the range - hopefully it won’t ever fall off or cause issues
Ok update. I recived the plate and it was very easy to mount. Optic fit right on and snug. Put 200 rounds through and it didnt loosen or move POA. This mount is solid and works perfectly. Fast shipping. Excellent quaility. And any company that includes stickers is a huge plus for me. 5 stars.
Or you can send your RX slide to L and M Precision Gun Works; PO box 36; Lakeview, NC 28350 and for ONLY $80.00 (shipping both ways and slide cut) Mark will convert your cut for any sight you want. If you send the sight with the slide he will mount and laser bore sight FREE...also you don't need to remove the rear sight...which means you will have back up sights!!
You didn’t tell me the one thing I wanted to know which was what Allen size the original screw that hold the plate on are. The gun didn’t come with an Allen for that.
Hi thanks for contacting us, that's a great point! The slide we had required a 3/32" hex key, but we always recommend double checking your serial number with the manufacturer just in case there is something different about your specific model.
Awesome products and a very well informed video. Will there be a plate offered with a rear suppressor height sight affixed to it to go along with the red dot for the M17?
Hi Joe, thank you for your feedback! At this time, we do not have a design for a suppressor height sight. We have thrown the idea around, but haven't come up with anything we like.
I received my EGW plate today, part 49282, it does not fit onto my Sig P322. I removed the rear sight but the notch on the slide does not line up with the tooth on the plate. Sad because I wanted to mount my Viper onto the 322.
Hello. The plate didn't fit because you ordered the incorrect part. What you ordered was a plate for a sig p365x. This is the mount you need: egwguns.com/vortex-viper-venom-red-dot-sight-mount-for-sig-sauer-p322-optics-ready-fits-burris-fastfire-and-docter Please give us a call and we would be happy to get this sorted out for you. Thank you!
Not a stupid question! We have tossed the idea around, but have not come up with any solutions that we are happy with. There are some other companies out there that do make mounts with integrated sights. They are typically more expensive and made out of steel too.
Do you need to install a plate or can you install the Red dot directly onto the barrel? And if so, is there an advantage to having it installed onto a plate? (Asking for my new P320 M-18, trying to decide between a Vortex vs a Sig Romeo? Any recommendations?)
Hi, thank you for contacting us. The Sig slides are cut for specific red dots, depending on the model. Red dot manufacturers do not all use the same "footprint". If you had a Vortex Venom and wanted to mount it on the Sig, you would require an adapter, but if you had the Sig Romeo (the correct one for the slide you have) you would be able to mount that directly. We sell a lot of the Vortex Venoms, but are currently out of stock and are not sure when they will come in. I hope this helps!
Hi thanks for contacting us. Yes, the 508t uses the RMR footprint. The Holosuns are only slightly larger than the RMR so there is a bit of overhang, but not too much.
Correction, the M17 is cut for the Delta Point Pro and the Romeo 1 Pro, not the standard optic. Sig's new electro-optics sights have the same footprint as the Delta Pro
Is there a cheap red dot for for M17 that has a rear sight to line up with the front? I want to have a sighting option in case the red dot stops working.
The Venom has small lines on the back of the sight that can be used as a backups. The Deltapoint Pro does have optional backup rear sights that you can purchase separately too. I cannot confirm if the Deltapoint Pro backup sight will work on the M17 though. You would have to reach out to Sig or Leupold. You would also most likely have to change the front sight height to match the rear. You could also use something like what Springer Precision makes: shop.springerprecision.com/m17-x-compact-x5-legion-front-cowitness-optics-mount/
Thanks for reaching out, we don't make an adapter plate for the RX and the Trijicon RMR. We just have come to market with the M17 and Trijicon RMR plate. I don't think we currently have plans to do an RX plate for the RMR though.
Hi, thanks for reaching out. Sorry to hear you are having trouble. What is the exact issue you are experiencing? Is the 3/32 key too big or too small? We aren't aware of any changes to the screw from Sig. If you are having issues, we always recommend taking the gun to a qualified and competent gunsmith.
Thanks for the feedback! We were just trying to cover up the incredibly irritating noises from the shop that day. We shouldn't have that problem anymore since we now film with lapel mics and on days that the shop leaves early!
Thanks for the video. I have a Sightmark mini shot M-Spec on my AR15... I would like to use it with my Sig Sauer P320 M17 do you know where I can found the right sight mount ?
Hi, thanks for contacting us. The Sightmark should use the same footprint as the Vortex Viper and Venom. The adapter plate for that is available here: www.egwguns.com/vortex-viper-venom-fits-burris-fastfire-and-docter-adapter-plate-for-optics-ready-sig-m17
@@EGWInc Thanks for your fast answer. It is the product I am looking for... but it seems you do not chip your products outside US. Could you tell me where I can find your product in France, or in Europe ?
RMR for the m17: www.egwguns.com/trijicon-rmr-sro-holosun-407c-507c-mount-for-sig-m17-deltapoint-pro The vortex viper/venom version is being made currently and wont be on the shelf for 6 weeks at a minimum. The SKU # for that will be 49201
@@jessehollowell2645 Yes, that is correct. Normally there would be a page there saying out of stock but we have been having website issues and had to remove the page temporarily.
Hi Ivan, unfortunately, at this time we don't have any plans to do any other adapter plates for the RX or the M17. I will pass this along to our product development team though! Thanks for reaching out!
@@EGWInc +1 that question. Seeing as the M17 is a military-esque weapon system and a lot of us in the military are Trijicon fanboys...for obvious reasons...there would probably be a pretty decent market size for a DDP to Trijicon mount adapter. Not to mention there are a heck of a lot more optics available in the Trijicon cut than the DDP. The fact that the M17/18 is cut for the DDP is just the classic military trying to tell us how to live our lives again conundrum. WE will never stop fighting back! ='D
@@SharpShooter9867 they aren't finished production yet, but they will be available soon. www.egwguns.com/trijicon-rmr-sro-holosun-507c-adapter-plate-for-sig-m17-deltapoint-pro
Hi mario, all of our torque specs are listed on all of our products. If you have the specific set up that is in the video, we recommend 12 in/lbs for the plate to the slide. Each manufacturer of red dot also has their own torque specs as well.
The Sig Romeo 1, Romeo 1T and Romeo 1 pro have a notch in the back of the optic to co-witness and use as a back up. My guess is adding an adapter plate would raise it up where you would have to add a suppressor height front sight to co-witness. But then again the slide is cut for those(and Delta point pro) do you wouldn't need an adapter plate
We do have plates that fit that cut, as long as the slide does not have a rear sight dovetail cut. We always recommend checking your slide to make sure it matches the photos we have published. www.egwguns.com/pistol-and-red-dot-mounts/mounts-by-firearm-brand-sight-cut/?model=818
Thanks for contacting us. We are not able to ship internationally, but you can contact JLN firearms, they should be able to help you out. JLNfirearms.com
Hi Cesar, thanks for reaching out. The Holosun 507k uses the DeltaPoint Pro footprint. We do not make an adapter plate for that. To our knowledge, the M17 slide comes cut from the factory to accept a DeltaPoint Pro. You may need different screws, but it should fit in the slide.
I cannot believe what I'm watching, you cannot possibly install optics onto an aluminum plate without being very careful to not over-tighten. We need torque numbers
Ordered one yesterday and got it next day Christmas eve!! Awesome customer service!!
Just installed your plate for the holosun 507c - the plate is the trijicon plate - works for both - I installed it - looks good - will try it at the range - hopefully it won’t ever fall off or cause issues
Thanks for posting this! I was actually able to install mine with minimal screwups after watching it.
Mine comes today. Very excited to give it a try. Thanks EGW.
Ok update. I recived the plate and it was very easy to mount. Optic fit right on and snug. Put 200 rounds through and it didnt loosen or move POA. This mount is solid and works perfectly. Fast shipping. Excellent quaility. And any company that includes stickers is a huge plus for me. 5 stars.
getting mine for christmas
Thanks for the video. I have a Vortex Viper, and just picked up the M17 today. Already placed my order for your base plate.
Or you can send your RX slide to L and M Precision Gun Works; PO box 36; Lakeview, NC 28350 and for ONLY $80.00 (shipping both ways and slide cut) Mark will convert your cut for any sight you want. If you send the sight with the slide he will mount and laser bore sight FREE...also you don't need to remove the rear sight...which means you will have back up sights!!
Well done video . Thanks . Unrelated , I have EGW pic-rail base mounts on a Marlin 917 and 922 . They work perfectly .
Thanks for reaching out and thank you for the feedback. We appreciate you using our products!
You didn’t tell me the one thing I wanted to know which was what Allen size the original screw that hold the plate on are. The gun didn’t come with an Allen for that.
Hi thanks for contacting us, that's a great point! The slide we had required a 3/32" hex key, but we always recommend double checking your serial number with the manufacturer just in case there is something different about your specific model.
Awesome products and a very well informed video. Will there be a plate offered with a rear suppressor height sight affixed to it to go along with the red dot for the M17?
Hi Joe, thank you for your feedback! At this time, we do not have a design for a suppressor height sight. We have thrown the idea around, but haven't come up with anything we like.
That's alot of work. My FNX was super easy.
Got one from the Romeo xero
That plate is huge.
I received my EGW plate today, part 49282, it does not fit onto my Sig P322. I removed the rear sight but the notch on the slide does not line up with the tooth on the plate. Sad because I wanted to mount my Viper onto the 322.
Hello. The plate didn't fit because you ordered the incorrect part. What you ordered was a plate for a sig p365x. This is the mount you need: egwguns.com/vortex-viper-venom-red-dot-sight-mount-for-sig-sauer-p322-optics-ready-fits-burris-fastfire-and-docter
Please give us a call and we would be happy to get this sorted out for you. Thank you!
Great video, I own a x5 and would like to get a plate with the rear sight attached can you recommend anything?
Unfortunately, we aren't aware of any plates that have a rear sight attached.
Stupid question. Why not make the plate with a rear sight already built in?
Not a stupid question! We have tossed the idea around, but have not come up with any solutions that we are happy with. There are some other companies out there that do make mounts with integrated sights. They are typically more expensive and made out of steel too.
Do you need to install a plate or can you install the Red dot directly onto the barrel? And if so, is there an advantage to having it installed onto a plate? (Asking for my new P320 M-18, trying to decide between a Vortex vs a Sig Romeo? Any recommendations?)
Hi, thank you for contacting us. The Sig slides are cut for specific red dots, depending on the model. Red dot manufacturers do not all use the same "footprint". If you had a Vortex Venom and wanted to mount it on the Sig, you would require an adapter, but if you had the Sig Romeo (the correct one for the slide you have) you would be able to mount that directly. We sell a lot of the Vortex Venoms, but are currently out of stock and are not sure when they will come in. I hope this helps!
Does the Holosun 508T fit using the RMR plate?
Is there any overhang at all?
Thanks for any information you can provide!
Hi thanks for contacting us. Yes, the 508t uses the RMR footprint. The Holosuns are only slightly larger than the RMR so there is a bit of overhang, but not too much.
Can you link me the EGW adapter plate for the m17?
www.egwguns.com/vortex-viper-venom-fits-burris-fastfire-and-docter-adapter-plate-for-optics-ready-sig-m17
Thanks 👍🇺🇸
Great Video thanks I own a P320 M17 where can I purchase a mounting kit for my Romeo 1 sight ?Do you have a link to where to purchase ? Thanks
Unfortunately, we don't make a plate that adapts the Romeo 1.
The civilian P320 M17 is cut for a Romeo 1 from Sigs factory. No plate required, just mount like you would on any other custom cut slide.
Correction, the M17 is cut for the Delta Point Pro and the Romeo 1 Pro, not the standard optic. Sig's new electro-optics sights have the same footprint as the Delta Pro
Is there a cheap red dot for for M17 that has a rear sight to line up with the front? I want to have a sighting option in case the red dot stops working.
The Venom has small lines on the back of the sight that can be used as a backups. The Deltapoint Pro does have optional backup rear sights that you can purchase separately too. I cannot confirm if the Deltapoint Pro backup sight will work on the M17 though. You would have to reach out to Sig or Leupold. You would also most likely have to change the front sight height to match the rear. You could also use something like what Springer Precision makes: shop.springerprecision.com/m17-x-compact-x5-legion-front-cowitness-optics-mount/
I have a P320RX and would like to install a Trijicon rmr. Do you have a plate thinner in order to mantain the iron sights cowitness?
Thanks for reaching out, we don't make an adapter plate for the RX and the Trijicon RMR. We just have come to market with the M17 and Trijicon RMR plate. I don't think we currently have plans to do an RX plate for the RMR though.
Can't seem to get the plate off with a 3/32. A 3/32 also won't fit in the screws on the plate I got from you guys. Am I missing something?
Hi, thanks for reaching out. Sorry to hear you are having trouble. What is the exact issue you are experiencing? Is the 3/32 key too big or too small? We aren't aware of any changes to the screw from Sig. If you are having issues, we always recommend taking the gun to a qualified and competent gunsmith.
@@EGWInc the 3/32 is to big. its possible i have a messed up allen key. not sure why it wont fit. its labeled 3/32.
Gd video; but you can lose the incredibly irritating background elevator music
Thanks for the feedback! We were just trying to cover up the incredibly irritating noises from the shop that day. We shouldn't have that problem anymore since we now film with lapel mics and on days that the shop leaves early!
Thanks for the video.
I have a Sightmark mini shot M-Spec on my AR15... I would like to use it with my Sig Sauer P320 M17 do you know where I can found the right sight mount ?
Hi, thanks for contacting us. The Sightmark should use the same footprint as the Vortex Viper and Venom. The adapter plate for that is available here:
www.egwguns.com/vortex-viper-venom-fits-burris-fastfire-and-docter-adapter-plate-for-optics-ready-sig-m17
@@EGWInc Thanks for your fast answer. It is the product I am looking for... but it seems you do not chip your products outside US. Could you tell me where I can find your product in France, or in Europe ?
@@francisaufrand7754 you can contact jlnfirearms.com/ and they should be able to help you out.
Do you still sell this adapter plate for m17? I'm not seeing it on your website
RMR for the m17: www.egwguns.com/trijicon-rmr-sro-holosun-407c-507c-mount-for-sig-m17-deltapoint-pro
The vortex viper/venom version is being made currently and wont be on the shelf for 6 weeks at a minimum. The SKU # for that will be 49201
@@EGWInc ok, so its just out of stock, not discontinued?
@@jessehollowell2645 Yes, that is correct. Normally there would be a page there saying out of stock but we have been having website issues and had to remove the page temporarily.
Will it fit into the holster with the red dot?
Hi Jaime thanks for reaching out. We have found that most holsters need to be modified when using our adapter plates.
does this work with the P320 m18 and Holosun 407c?
Yes, that is correct. It will with with that model of gun and red dot.
Are you guys making an RMR adapter plate for the RX slide?
Hi Ivan, unfortunately, at this time we don't have any plans to do any other adapter plates for the RX or the M17. I will pass this along to our product development team though! Thanks for reaching out!
@@EGWInc +1 that question. Seeing as the M17 is a military-esque weapon system and a lot of us in the military are Trijicon fanboys...for obvious reasons...there would probably be a pretty decent market size for a DDP to Trijicon mount adapter. Not to mention there are a heck of a lot more optics available in the Trijicon cut than the DDP. The fact that the M17/18 is cut for the DDP is just the classic military trying to tell us how to live our lives again conundrum. WE will never stop fighting back! ='D
@@SharpShooter9867 Thanks for letting us know! I have passed this request to our product development team!
@@SharpShooter9867 they aren't finished production yet, but they will be available soon. www.egwguns.com/trijicon-rmr-sro-holosun-507c-adapter-plate-for-sig-m17-deltapoint-pro
We need some torque numbers here my man. This is an aluminum plate and I don't want to over tighten either screws and rip the aluminum threads
Hi mario, all of our torque specs are listed on all of our products. If you have the specific set up that is in the video, we recommend 12 in/lbs for the plate to the slide. Each manufacturer of red dot also has their own torque specs as well.
oh snap it looks to have co-witness. Do I need to get a higher front sight?
Hi thanks for reaching out. Our mount does not allow to cowitness as this mount requires the rear sight to be removed.
The Sig Romeo 1, Romeo 1T and Romeo 1 pro have a notch in the back of the optic to co-witness and use as a back up. My guess is adding an adapter plate would raise it up where you would have to add a suppressor height front sight to co-witness. But then again the slide is cut for those(and Delta point pro) do you wouldn't need an adapter plate
Will this plate work for the p320 Xfull?
Hi, thanks for contacting us. It looks like our M17 plate will work, but we haven't had anyone confirm. Thanks!
What Allen key did you use to take off the plate
We used a 3/32 hex wrench to remove the rear sight cover plate that comes standard on the Sig.
Will either of these plates work with a p320 xfull
Is your gun optics ready?
So, does the plate fit p320 x5 legion with drltapoint pro cut?
We do have plates that fit that cut, as long as the slide does not have a rear sight dovetail cut. We always recommend checking your slide to make sure it matches the photos we have published.
www.egwguns.com/pistol-and-red-dot-mounts/mounts-by-firearm-brand-sight-cut/?model=818
@@EGWInc Well, my X5 Legion has 3 sets of holes. In your pictures, there are only 2 sets of holes?
@@keimolantio Some newer model X5 Legions do have 3 sets of holes. This mount should still fit your application.
Delivrery possible in France ?
Thanks for contacting us. We are not able to ship internationally, but you can contact JLN firearms, they should be able to help you out. JLNfirearms.com
Would this accept a holosun 507k?
Hi Cesar, thanks for reaching out. The Holosun 507k uses the DeltaPoint Pro footprint. We do not make an adapter plate for that. To our knowledge, the M17 slide comes cut from the factory to accept a DeltaPoint Pro. You may need different screws, but it should fit in the slide.
Will this work with an airsoft m17?
Hi, unfortunately this plate does not work with the airsoft version.
@@EGWInc alright thanks
Good information. Please stop saying "go ahead and..."
Thanks for the feedback! Noted for next video!
don't be a jackass! As long as he's teaching us, he can even say COWABUNGA every ten seconds.
Go ahead and keep your comments to yourself.
I cannot believe what I'm watching, you cannot possibly install optics onto an aluminum plate without being very careful to not over-tighten. We need torque numbers
Hi mario, all of our torque specs are listed on all of our products. Each manufacturer of red dot also has their own torque specs as well.