Milwaukee didn't invent the concept but their version elevated the design into the stratosphere. That is what almost everyone carries and what everyone now copies. Imitation is the greatest form of flattery. But competition is good for everyone both in design and price. Bring it.
Exactly. Now Milwaukee will have to drop the price of the Fastback under the price of the Dewalt. Let them worry about any possible patent infringement. Not my problem.
I’ve used kobalt full size flip open black razor knife for years. Thinnest one I’ve found. I really like it. I will be buying these Dewalts now. 😊 gotta try them all.
Milwaukee didn't elevate anything. Plunge lock (button lock) pocket knives have been around for decades in far superior forms. The fastback Is still just a cheap knife that isn't even close to the level quality of actual knife companies products.
As a pocket knife hoarder, for utility these look well made especially for the price point. Cheapest knives I buy are $60+ lol. The thicker handle for most on the blade storage model is a con for constant daily carry, but that's why the other model exists. The fatter one with storage is more a heavy use guy, and the fatter handle actually gives better, more reliable grip on a job site.
When he first pulled out the pocket knife I said to myself why would anyone buy a Dewalt (or any tool brand for that matter) pocket knife when they could get a better one from an exclusive knife manufacturer? But then when he said $15 I said well that’s why. I expected it to be closer to $60 but for $15 I’d get that to leave in my tool bag/box/belt.
@@billsedutto8824 exactly my thought. The drop point or tanto might be a good work knife for me, no big deal if I lose it or break it trying to fix something on my truck. Or perhaps losing it inside one of my ahole customers 😂
As a fellow knife bro, I couldn’t help but crack up laughing when he was using that flipper tab over & over and said “super smooth action” and it wasn’t even opening all the way. 😂
@mikeappleget482 hands down best flipper ive ever owned is my civivi elementum its just so much fun to play with lol this video just made me cringe that flip was worse than the kershaw swerve i keep in my junk drawer cause i hate that knife... and in truebrand name fashion for cheap knives dewalt uses... drumroll please... 3cr13 for the blades... fuckin trash
I have the old version of the Dewalt flip utility knife and it's worn out so just in time for a replacement. I like the button action as well as the thinness of the one without the blade storage. and pricing seems about the same so even better.
Bought mine today. The basic utility model. I switched the pocket clip to the opposite side but even though I tightened it down the clip was loose. I used my Dremel with ball end burr took it down where the screw goes in so when tightened the screw pressed tight against the clip. Then , on the other side there is a slot that appears to be for a lanyard but there is a screw in serving no purpose. So I just put a little pressure on that screw and it popped out. Then I put in a nice short lanyard. Nice 👍
I have one of those utility knives because sometimes I have to assemble boxes all day long and well it doesn't exactly lock in place and can swing back it's so easy to open and I find it very comfortable
Usually the paper test for the blade is done from slicing from the outside to the inside. stabing the paper and ripping through it does little to show the quality of the factory edge. Because your technically poking the paper and causing it to rip before the edge is cutting. Kind of bypassing the test all together
The button lock is a Benchmade design. When the patent was up, everyone stole the idea. Saying DeWalt is copying Milwaukee when Milwaukee is just a copy... just seems silly.
I’m missing a lanyard hole. I’m trying to figure out what the little screw in the slot on the opposite end of the blade mount. It looks like that would be a good slot for a lanyard
Nice knife, i would like to own one for work, but the tape notch holder on my milwaukee fast back takes the cake. It really makes ripping stuff comfortable. I can't believe dewalt missed out on it. I mean, it's really dumb not to put one on a cool looking knife
@@ToolReviewZone Lol, he's asking for blade steel as in the mixture of alloys. 8Cr13MoV would be a softer steel whereas CPM S30V is considered a super steel. It's a knife snob thing. If you're spending $14 on a utility blade it ain't gonna be God's gift to steel, and it doesn't need to be. These are supposed to be workhorse knives so you can leave your pocket princesses at home, LOL. I have a Spyderco Manix 2 that was $120, but it gets no special treatment. It's the most expensive box tape cutter I own, lol.
next time you do a knife review start with no band aides then end with most of your fingers in band aids. and a first aid kit. it will be hilarious and nice like.
I have a Klein and a Milwaukee that have a screwdriver bit holder on them I have a new DEWALT that I like but I wish it had a bit holder just comes in handy especially if you need to pry a little the flat head is way stouter than a utility blade
Talk about copying. What I would like DeWalt to make is the small right angle battery powered die grinder Milwaukee makes. I use 2” Rolox disks a lot. A right angle grinder works well. But they’re too slow and too big and heavy. I ended up buying the Harbor Freight Warrior $15 right angle grinder (on sale for $9.99). It’s smaller and lighter and the weaker motor is fine for those. I don’t like the thumb trigger with the strong spring. The Milwaukee grinder is perfect. But I really don’t want to spend over $400 for a tool, charger and batteries for that one purpose, because, really, I have no other use for it. If DeWalt came out with one I would buy it.
Years ago I was looking at a pocket knife that the salesmen handed me to try. I realized I had slightly cut myself but did not even feel it. I bought that knife. Though these days I go for replaceable blade knives. That way I'm free to abuse the hell out of the blade without remorse.
The belt clip on the blade end was about to be a deal breaker for me. Since it is reversible, I like it. Makes no sense to me to have the clip on the blade end. You have to pull the knife, then turn it over to use it. With the clip on the haft end, it comes out ready to use.
That's not a bad price for the knives. I am mostly anti 'tool brand' knives because you are usually just paying extra for the logo and could get a better knife cheaper. Appreciate the decision to avoid the multitooling of a utility knife and the option for blade storage or not.
I've been using dewalt knives for many years in my EDC (every day carry). I find myself using it constantly for pretty much anything.... from opening boxes to cutting steak.... LOL. Have a newer version similar to the one you are showing in my car...
Clint I’m getting a little off subject but I wanted to ask you if you heard that the Milwaukee fuel gen4 1/4’’ impact is breaking down. I saw a video stating they went through 3or4 of them and they broke the same way,are you or did you experience any problems with your Milwaukee gen 4 1/4’’ impact driver?
I've heard some rumbling about it. I have ot personally had any issues with .ine, but it's a very good possibility that there was a bad batch released 🤔. Sometimes I think people think Milwaukee is the perfect tool company, but they have issues just like every other brand. If their is an issue, hopefully they get it figured out soon
Bought the blade storage version the same day I got the email from Dewalt . The blade release sold me , much easier than Milwaukee and you didn’t show that the blade insert is just insert in slot and push in no pushing a button or pulling on a lever . I had been using the fast back for 10 years .
Your yard is looking pretty good. BECAUSE YOU STOLE IT! I had grass in my yard first. Then when other people got grass I had to start mowing it. People stole that. Then i used fertilizer and guess what….
As a DeWALT guy I’m disappointed! There’s a handful of Milwaukee tools I use because DeWALT doesn’t have equivalent ones. I can’t believe they didn’t include a driver bit. If Klein put a driver on there’s DeWALT should have too. I am happy I received my DeWALT construction jacks today
You gotta switch those clips to tip up, and I hate that they're all serrated. But this aren't for knife guys, they're for DeWalt guys. The utility blade one seems alright, I'm on the Red Team though.
Not angry. I collect tools in general. And have duplicate tools in diff places. Built a box truck/uhaul this past jan with my grandsons. Diesel swapped from a truck. Truck started life as a hertz. So its yellow! Have dewalts packouts in there for power tools, have yellow hf us general series 3 yellow boxes in there too. Have a e350 van, in red its hand tools and power tools are milwaukee haha. My son has a 392 rubicon jeep, too rich for my blood. Have a 2020 rubicon gladiator with a 5.3L from a newer sierra. Its red too. My tools are icon, milwaukee, snap on, and craftsman. Powertools are milwaukee again. Have a '22 daihatsu hijet truck I use around my property, in town. Built a toolbox for it. Quinn master impact tools mixed with kobalt. All metric stuff. Power tools are makita. Wife picked up a 2022 subaru ascent in feb, she just finished her 6.2L LTX crate swap from mast engineering with her car club. Its penzy yellow and black. Her tools are the dewalt toolsets and power tools haha. She will love these edged tools 🤘
Clint my brother, how did you get the spiffy gift box?? I like those. I have the fastback but I don’t have these one. And since you missed my birthday in March!! Hahaha
@@ToolReviewZone I've used my share of folding knives. Some like Milwaukee, I liked the design but the steel was too soft. I've had some from Lowes that had decent steel and it was noted on the blades. That said some of the mystery metal folders have been good enough. It is said of knife steels have properties such as toughness, edge retention, ease of sharpening and rust resistance. But no steel is the best in all categories mentioned. Also, I carry a diamond sharpener as an EDC item. Also, sometimes having a knife that stays closed is important i e when crawling under or in equipment or if lost might end up a pump system.
Let's not kid ourselves. Anyone can tell this is DeWalt's response to the fastback. Honestly, I like it better. I just bought the one that holds extra blades. I'm going to buy the thinner version later because I collect ones I think are interesting. I didn't like how the fastback didn't quite fit my hand. I bought one and then never used it. Update: I'm going to have to return it because it exposes more than half the blade. I don't know what kind of psychopath made that decision but if i flip the blade around I should have a fresh cutting surface. I'm legitimately very upset. I thought I found the perfect knife.
Dewalt has had golding utility knives for a long time. Like at least 10 years. I have o e that I bought ten years ago. Doesn't have the same handle as that one, though.
@@maxhughes5687 4 here in Connecticut. UNDER 4. If it's 4 exactly they can technically get ya. One guy had a cop measure out 4in of string on a ruler, cut it, and lay it across the blade profile to show that the total length of the edge counting the drop point was just over, when factory specs said 3.98 or some shit. that was like 20 something years ago. It's rare to get nailed though many people have larger knives out in public as long as you're minding your own and look like you might have a reason for it like if you have 2+ realtree garments on LOL
This whole copy this and copy that argument has to stop. If anything even it's true in this example it might make Milwaukee's next step better or at least keep them honest if Milwaukee was a monopoly in knives they'd eventually make one that doesn't even cut paper. Cheers to all and hope the projects across N.A. are going well.
$14.97 for that first one? Cheap Gas-station knife that likely costs 1/3 as much without the Dewalt logo on it. Reminds me of the cheap DeWalt multi-tool you can buy. (No, not THAT multi-tool that is battery-powered. That one is great. The other one.) Will never understand why DeWalt does this. Yes, we all know that when it comes to the most common three among the Pros, you have Makita, Milwaukee, and the higher-end DeWalt tools. The lower-end ones?.... Okay, some of them are quite good. Still worth buying. But these knives are below the lower-end DeWalt models. Not worth it unless you want to include an "official" DeWalt knife in a Photo-shoot featuring your latest, quality, DeWalt power-tool purchase.
I'm not mad about the knives, in fact I think they're neat. I'm mad DeWalt is getting its teeth kicked in by Milwaukee and Milwaukee Jr. (Ryobi) in the innovation department
Are they really made by DeWalt or are they just licensed to use the brand name? There seems to be several 'sets' with other names and similar functions.
He says it cuts well but he does a plunge cut into the paper instead of slicing into it from the edge as is standard. Says they open easy even though the flipper fails multiple times. He was either doesn't know much about knives or doesn't want to anger the company. I couldn't care less if fanboys are triggered by the last two. Utility knives flood the market now so it's irrelevant. Find what you like and stick with it. What matters for any knife is how it performs it's basic tasks and in this video the first two are questionable at best. Oh, and if you are going to review knives, including what specific materials they are made from helps. Especially for the blade.
Any of these tool branded pocket knives are junk. Just look at this video, he has flippers that cant deploy properly half the time. You can get cheap China knives better than this. They are just taking advantage of people who arent knife people. Its like selling a Hart or Ryobi to a non tool person.
Lol most American, brands aren't made her anymore. Stupid labor laws don't allow the greedy bastards to open up sweat shops here so they make almost everything elsewhere where those pesky labor laws and child labor laws won't get in their greedy ass way.
Milwaukee didn't invent the concept but their version elevated the design into the stratosphere. That is what almost everyone carries and what everyone now copies. Imitation is the greatest form of flattery. But competition is good for everyone both in design and price. Bring it.
I'll agree, but I don't think Milwaukee designed it. I've heard that workpro tools made it for them. They probably make this as well, but not 100%
Exactly. Now Milwaukee will have to drop the price of the Fastback under the price of the Dewalt. Let them worry about any possible patent infringement. Not my problem.
Lenox has done this for years
I’ve used kobalt full size flip open black razor knife for years. Thinnest one I’ve found. I really like it. I will be buying these Dewalts now. 😊 gotta try them all.
Milwaukee didn't elevate anything. Plunge lock (button lock) pocket knives have been around for decades in far superior forms.
The fastback Is still just a cheap knife that isn't even close to the level quality of actual knife companies products.
As a pocket knife hoarder, for utility these look well made especially for the price point. Cheapest knives I buy are $60+ lol.
The thicker handle for most on the blade storage model is a con for constant daily carry, but that's why the other model exists. The fatter one with storage is more a heavy use guy, and the fatter handle actually gives better, more reliable grip on a job site.
?? WHO u callin Fat?.. WHO you callin heavy?... smFh
When he first pulled out the pocket knife I said to myself why would anyone buy a Dewalt (or any tool brand for that matter) pocket knife when they could get a better one from an exclusive knife manufacturer? But then when he said $15 I said well that’s why. I expected it to be closer to $60 but for $15 I’d get that to leave in my tool bag/box/belt.
@@billsedutto8824 exactly my thought. The drop point or tanto might be a good work knife for me, no big deal if I lose it or break it trying to fix something on my truck. Or perhaps losing it inside one of my ahole customers 😂
As a fellow knife bro, I couldn’t help but crack up laughing when he was using that flipper tab over & over and said “super smooth action” and it wasn’t even opening all the way. 😂
@mikeappleget482 hands down best flipper ive ever owned is my civivi elementum its just so much fun to play with lol this video just made me cringe that flip was worse than the kershaw swerve i keep in my junk drawer cause i hate that knife... and in truebrand name fashion for cheap knives dewalt uses... drumroll please... 3cr13 for the blades... fuckin trash
If it angers anyone just don’t purchase it. Knife and tools don’t anger me unless they break. Just saying
Would’ve liked to see a screwdriver flip out like Milwaukee.
Milwauk-I-A. Get it right.
@actual_ice_lord4068 🤣🤣👊
It is always the Milwauk-I-A fans complaining
I'm not a Milwaukee fan boy either but how are you going to come out with a product years after Milwaukee did and have a worse design .....try again
I haven’t seen any Milwaukee fanboys complaining, what are you talking about?😂
Well, when Milwaukee comes up with as many tools as Dewalt, then they can be more competitive. They have nothing compared to Dewalt. @jwanilpatel3223
@@jwanilpatel3223better.
You mean the Chinese bots?
I have the old version of the Dewalt flip utility knife and it's worn out so just in time for a replacement. I like the button action as well as the thinness of the one without the blade storage. and pricing seems about the same so even better.
Bought mine today. The basic utility model. I switched the pocket clip to the opposite side but even though I tightened it down the clip was loose. I used my Dremel with ball end burr took it down where the screw goes in so when tightened the screw pressed tight against the clip. Then , on the other side there is a slot that appears to be for a lanyard but there is a screw in serving no purpose. So I just put a little pressure on that screw and it popped out. Then I put in a nice short lanyard. Nice 👍
I have one of those utility knives because sometimes I have to assemble boxes all day long and well it doesn't exactly lock in place and can swing back it's so easy to open and I find it very comfortable
Usually the paper test for the blade is done from slicing from the outside to the inside. stabing the paper and ripping through it does little to show the quality of the factory edge. Because your technically poking the paper and causing it to rip before the edge is cutting. Kind of bypassing the test all together
My wife said you cut yourself almost as fast as I would have, lol. Thanks for video!
Hahaha
The button lock is a Benchmade design. When the patent was up, everyone stole the idea.
Saying DeWalt is copying Milwaukee when Milwaukee is just a copy... just seems silly.
I am so Appreciative that they didn't put a "wire stripper" on the utility knives when open!
I will be picking up one. Don’t care about copying. I use Dewalt. 👍👍 I appreciate the info.
Thank you for continually making entertaining and informative videos
I am a nut for a good knife and have Milwaukee hardline knives. but of course-the best knife is the one you have on yourself.
True poetry Brother man Ron 🔥🔥🔥👊👊👊
Milwaukee actually flips open.
I’m missing a lanyard hole. I’m trying to figure out what the little screw in the slot on the opposite end of the blade mount. It looks like that would be a good slot for a lanyard
Nice knife, i would like to own one for work, but the tape notch holder on my milwaukee fast back takes the cake. It really makes ripping stuff comfortable. I can't believe dewalt missed out on it. I mean, it's really dumb not to put one on a cool looking knife
Any idea what kind of blade steel they using on the folding knife?
Stainless steel 👊
@@ToolReviewZone Lol, he's asking for blade steel as in the mixture of alloys. 8Cr13MoV would be a softer steel whereas CPM S30V is considered a super steel. It's a knife snob thing. If you're spending $14 on a utility blade it ain't gonna be God's gift to steel, and it doesn't need to be. These are supposed to be workhorse knives so you can leave your pocket princesses at home, LOL. I have a Spyderco Manix 2 that was $120, but it gets no special treatment. It's the most expensive box tape cutter I own, lol.
New to the TRZ! will have to view more of your videos. THE DRYWALL LIFT FROM MYNARDS WAS HILARIOUS & INFORMATIVE! Great job
Really appreciate that fish👊
Where can I buy the kit as shown????
Google
next time you do a knife review start with no band aides then end with most of your fingers in band aids. and a first aid kit. it will be hilarious and nice like.
That's actually pretty funny. I will defdo that 🤣🤣👊
@@ToolReviewZoneBarbie bandaids 😂
@@liquidrockaquatics3900 🤣🤣🤣👊
I have a Klein and a Milwaukee that have a screwdriver bit holder on them I have a new DEWALT that I like but I wish it had a bit holder just comes in handy especially if you need to pry a little the flat head is way stouter than a utility blade
Talk about copying. What I would like DeWalt to make is the small right angle battery powered die grinder Milwaukee makes. I use 2” Rolox disks a lot. A right angle grinder works well. But they’re too slow and too big and heavy. I ended up buying the Harbor Freight Warrior $15 right angle grinder (on sale for $9.99). It’s smaller and lighter and the weaker motor is fine for those. I don’t like the thumb trigger with the strong spring. The Milwaukee grinder is perfect. But I really don’t want to spend over $400 for a tool, charger and batteries for that one purpose, because, really, I have no other use for it. If DeWalt came out with one I would buy it.
I love the knife that is not serrated it is super sharp, found that out by accident!!!!
We need more Milwaukee lawn tools
Is it sharp?
Clint: "Ouch! Yes. I cot mah self. It is sharp"
Always putting himself in the line of fire so we don't have to. Such a great guy.
Hahahaz just had to test itbto make sure brother 🤣👊
Years ago I was looking at a pocket knife that the salesmen handed me to try. I realized I had slightly cut myself but did not even feel it. I bought that knife.
Though these days I go for replaceable blade knives. That way I'm free to abuse the hell out of the blade without remorse.
The belt clip on the blade end was about to be a deal breaker for me. Since it is reversible, I like it. Makes no sense to me to have the clip on the blade end. You have to pull the knife, then turn it over to use it. With the clip on the haft end, it comes out ready to use.
That's not a bad price for the knives. I am mostly anti 'tool brand' knives because you are usually just paying extra for the logo and could get a better knife cheaper. Appreciate the decision to avoid the multitooling of a utility knife and the option for blade storage or not.
do you have to buy the whole set?
No
LOL.. damn OhiO you got my respect for NOT editing out your Ginsu incident, im waiting for the sawstop nazis... SFMF
Yeah, they'll be here soon hahaha
Don't feel bad, If I even look at my tools, I start bleeding. Nice review, and Go Browns!
Haha, tha ks for the comment, but go stillers 🤣👊
I've been using dewalt knives for many years in my EDC (every day carry). I find myself using it constantly for pretty much anything.... from opening boxes to cutting steak.... LOL. Have a newer version similar to the one you are showing in my car...
Clint I’m getting a little off subject but I wanted to ask you if you heard that the Milwaukee fuel gen4 1/4’’ impact is breaking down. I saw a video stating they went through 3or4 of them and they broke the same way,are you or did you experience any problems with your Milwaukee gen 4 1/4’’ impact driver?
I've heard some rumbling about it. I have ot personally had any issues with .ine, but it's a very good possibility that there was a bad batch released 🤔. Sometimes I think people think Milwaukee is the perfect tool company, but they have issues just like every other brand. If their is an issue, hopefully they get it figured out soon
Really like the blade change on the utility knives, shame there couldn't be more exposed egde, but whatever 👍🏾
Bought the blade storage version the same day I got the email from Dewalt . The blade release sold me , much easier than Milwaukee and you didn’t show that the blade insert is just insert in slot and push in no pushing a button or pulling on a lever . I had been using the fast back for 10 years .
Thanks for another great video Clint!
And thank you for the comment James!!!
Your yard is looking pretty good. BECAUSE YOU STOLE IT! I had grass in my yard first. Then when other people got grass I had to start mowing it. People stole that. Then i used fertilizer and guess what….
Haha
I have a Milwaukee knife and yes - it's basically the same except for handle shape. Didn't come in that elegant 'bespoke' packaging though.
I've been trying for years to become a product tester for DeWalt & to get them as a sponsor. Just seems nearly impossible. But great box & review
button lock has definitely been around for awhile before milwaukee. Protech, Boker, CRKT etc. Allot of gravity knives also use some variation.
As a DeWALT guy I’m disappointed! There’s a handful of Milwaukee tools I use because DeWALT doesn’t have equivalent ones. I can’t believe they didn’t include a driver bit. If Klein put a driver on there’s DeWALT should have too. I am happy I received my DeWALT construction jacks today
Appreciate the feedback 👊
I really like the slim profile on the first and the second one too 👌🏽. Makes for a great EDC
Somehow the Makita Gnome made that blade cut you Clint!!!!!!!!!!!!!!! He's got it in for you!!!!
He is so very pesky Greg 😪
You mean you are correct handed…lol! Hey competition is good! Now go get mama to tend to your wounds…lol!
Haha, correct handed, I love it 🤣🤣👊👊👊
You gotta switch those clips to tip up, and I hate that they're all serrated. But this aren't for knife guys, they're for DeWalt guys. The utility blade one seems alright, I'm on the Red Team though.
Where can you buy them
I noticed we have the same exact kind of wedding band my friend we purchased mine almost 20 years ago
I am a Milwauk-I-A guy but thos are REAL NAS LIKE!!
Haha, what's up Elegance 👊👊
Not angry. I collect tools in general. And have duplicate tools in diff places. Built a box truck/uhaul this past jan with my grandsons. Diesel swapped from a truck. Truck started life as a hertz. So its yellow! Have dewalts packouts in there for power tools, have yellow hf us general series 3 yellow boxes in there too. Have a e350 van, in red its hand tools and power tools are milwaukee haha. My son has a 392 rubicon jeep, too rich for my blood. Have a 2020 rubicon gladiator with a 5.3L from a newer sierra. Its red too. My tools are icon, milwaukee, snap on, and craftsman. Powertools are milwaukee again. Have a '22 daihatsu hijet truck I use around my property, in town. Built a toolbox for it. Quinn master impact tools mixed with kobalt. All metric stuff. Power tools are makita.
Wife picked up a 2022 subaru ascent in feb, she just finished her 6.2L LTX crate swap from mast engineering with her car club. Its penzy yellow and black. Her tools are the dewalt toolsets and power tools haha. She will love these edged tools 🤘
Are these in HD yet
Clint my brother, how did you get the spiffy gift box?? I like those. I have the fastback but I don’t have these one. And since you missed my birthday in March!! Hahaha
Damn Mike, happy birthday brother!!!!!
@@ToolReviewZone thanks brother!! Being 50 sucks
Thanks as always Clint!!!!!
No mention of the steel, really.
You just mentioned it, thanks
@@ToolReviewZone I've used my share of folding knives. Some like Milwaukee, I liked the design but the steel was too soft. I've had some from Lowes that had decent steel and it was noted on the blades. That said some of the mystery metal folders have been good enough. It is said of knife steels have properties such as toughness, edge retention, ease of sharpening and rust resistance. But no steel is the best in all categories mentioned. Also, I carry a diamond sharpener as an EDC item. Also, sometimes having a knife that stays closed is important i e when crawling under or in equipment or if lost might end up a pump system.
It's basically the same as the Milwaukee fastback it seems. Good feedback though
What's the product number for the four pack?
Nice video! Like these. Have a good day!😊
Getchu dem reviews done boyyy! Ayyy
Sad they did not copy the blade storage of fastback 1505 in handle scale. I want a thin one with one extra blade.
Let's not kid ourselves. Anyone can tell this is DeWalt's response to the fastback. Honestly, I like it better. I just bought the one that holds extra blades. I'm going to buy the thinner version later because I collect ones I think are interesting. I didn't like how the fastback didn't quite fit my hand. I bought one and then never used it.
Update: I'm going to have to return it because it exposes more than half the blade. I don't know what kind of psychopath made that decision but if i flip the blade around I should have a fresh cutting surface. I'm legitimately very upset. I thought I found the perfect knife.
I have a fastback with a screwdriver and i love it. These are ok but i need to have the screwdriver
Dang razors always wanna cut ya when they're sharp
They hungraaaaay
I just carry a quality knife. I leave the razor cutter in the tool box but i can see where this would be handy
That blade its like one of my lidl blade i use for more than 15 years.
Lidl Germany brand parkside
So no Milwaukee or dewald had make first .
Dewalt has had golding utility knives for a long time.
Like at least 10 years. I have o e that I bought ten years ago. Doesn't have the same handle as that one, though.
I heard it opened in some else's pocket and cut the other person's leg off?!! 😁
Oh! Is it April 1 already?
Dammit I just replaced my fast back with another fast back and this blade switch looks sooooo much better😭😭😭😭
My state limit is 3 inches. The commonwealth of Virginia is 2 inches.
What has happened to this country?
That's insane
@@maxhughes5687 4 here in Connecticut. UNDER 4. If it's 4 exactly they can technically get ya. One guy had a cop measure out 4in of string on a ruler, cut it, and lay it across the blade profile to show that the total length of the edge counting the drop point was just over, when factory specs said 3.98 or some shit. that was like 20 something years ago. It's rare to get nailed though many people have larger knives out in public as long as you're minding your own and look like you might have a reason for it like if you have 2+ realtree garments on LOL
Awesome blades and cutting tools.
This whole copy this and copy that argument has to stop. If anything even it's true in this example it might make Milwaukee's next step better or at least keep them honest if Milwaukee was a monopoly in knives they'd eventually make one that doesn't even cut paper. Cheers to all and hope the projects across N.A. are going well.
$14.97 for that first one? Cheap Gas-station knife that likely costs 1/3 as much without the Dewalt logo on it. Reminds me of the cheap DeWalt multi-tool you can buy. (No, not THAT multi-tool that is battery-powered. That one is great. The other one.) Will never understand why DeWalt does this. Yes, we all know that when it comes to the most common three among the Pros, you have Makita, Milwaukee, and the higher-end DeWalt tools. The lower-end ones?.... Okay, some of them are quite good. Still worth buying. But these knives are below the lower-end DeWalt models. Not worth it unless you want to include an "official" DeWalt knife in a Photo-shoot featuring your latest, quality, DeWalt power-tool purchase.
I have one. I wish they had a smaller version
The advantage Dewalt has over almost everyone is yellow is the easiest color to spot.
lol. Just another day for that knuckle!😂
Not a dewalt fan but those are clean
I'm not mad about the knives, in fact I think they're neat. I'm mad DeWalt is getting its teeth kicked in by Milwaukee and Milwaukee Jr. (Ryobi) in the innovation department
I do have the Mil-waka-I-A fastbacks, but them Dee-Walts are real nass like.
CLINT bro very nice bro ther in my baying list and the best I'm smashing my like botton Texas style
I'm angry as hell. Not about this but still
The lack of blade storage is no bueno
You're not supposed to stab the paper when you do the paper cut test. I suspect you have to stab it or else it's not going to cut??
Not a very subtle colourway. That yellow makes the knives look like toys. I know they ain't. But that yellow......
DeWalt makes knives..... Why should that make me angry? 🤔 I demand something infuriating, right now!
I thought those two on the left were automatics at first with that button
Are they really made by DeWalt or are they just licensed to use the brand name?
There seems to be several 'sets' with other names and similar functions.
Cool vid thanks for sharing!
Without mention of the blade steel. Gonna take a wild guess they are junk.
Edc is craftsman asst open,as fast as any auto that i have at 20bucks it wont tear ya up if ya loose it
Pocket clip looks like it's for right-handers only, tip up or down.
I like the first one..
ty!
He says it cuts well but he does a plunge cut into the paper instead of slicing into it from the edge as is standard.
Says they open easy even though the flipper fails multiple times.
He was either doesn't know much about knives or doesn't want to anger the company. I couldn't care less if fanboys are triggered by the last two. Utility knives flood the market now so it's irrelevant. Find what you like and stick with it. What matters for any knife is how it performs it's basic tasks and in this video the first two are questionable at best.
Oh, and if you are going to review knives, including what specific materials they are made from helps. Especially for the blade.
Any of these tool branded pocket knives are junk. Just look at this video, he has flippers that cant deploy properly half the time. You can get cheap China knives better than this. They are just taking advantage of people who arent knife people. Its like selling a Hart or Ryobi to a non tool person.
The big question is, where are they made? An AMERICAN Brand name should be made in the good old USA...:)
Lol most American, brands aren't made her anymore. Stupid labor laws don't allow the greedy bastards to open up sweat shops here so they make almost everything elsewhere where those pesky labor laws and child labor laws won't get in their greedy ass way.
Flip flip flip flip flip flip flip
Yeah boi
🤣🤣🤣🤣👊
I like my Ryobi utility knife fastback.
Oooh....Ahhh. It's fancy, box time.
Keep a bandaid handy!😂😂
Personally I like a Kershaw.
The utility knives look good but for $15 the tanto and drop point have to be junk. I don't know why dewalt have changed to making junk now.