Thanks Brother! I contemplated scrapping 2 additional box fans but they are in “like new” condition and I’m definitely keeping at least one to replace my dirty one 🤣. Thanks for the thumbs up and comment brother!!! 😁🍻👊🏼
Hey S2C! Nice Teardown video! Bonus Aluminium to the copper is great. But everyone in your spot seems to be lazy 🤔 do u live in lazy town? 🤣🤣🤣 Anyway have a nice weekend, see u on the next vod mate!!!!🖖
Hello my friend! Thank you very much and a bit of aluminum is always welcomed, especially when I’m going after that sweet copper! Oh I can’t speak for everyone but I’m definitely lazy when it comes tedious things. Have a great week my friend and thanks for watching! 😎🍻👊🏼
Theres a more easier method when it comes to taking the blade set off of the shaft, before removing the motor support from the frame, you have to flip the fan to its back, grab the back of the center hub with both of your hands on two opposite sides, and push down. It can be a bit of a hassle while doing this, but sometimes they will come off easily. I've cleaned a bunch of fans in the past by doing this method, and it always seems to work, just giving you a little heads up the next time you scrap a cheap box fan like this one.
Hey man, thanks for the helpful scrapping tip! I’ll be sure to give it a try the next time I scrap one of those box fans out. Thanks for watching and the suggestion 🙂🍻
OHHHHH, pyrotechnics flying. So pretty dirty. Put that Dirty Stripper to WORK!!! Ohhh, it takes it in the hole so good. Look at those slits. ******** ******** I would honestly want to keep the Cast Aluminum stator cases. That was more than I was expecting for those two fans. And incase you didn't figure it out, the first two lines were RT reactions.
Lol those fans were dirty AF and the stripper like typical strippers is getting old, dirty and worn out 🤣. Cast aluminum is a really good grade of aluminum in my opinion. Most of the impurities within the metal have already been removed prior to being casted. Fans can be a nice way to get copper in abundance, especially if you have a ton of fans lying around. I always pick them up whenever I see them. 🙂🍻
@Scrap2Cast oh man🫤 I ordered from eBay and got a message (hand to God, I'm not lying) that they were going to make them, then send them out, expect a 5-9 day delay. The next message says that they are finished and they are ready to mail expect them in 3-5 days.😑
I think that copper will be the poor man's gold next year. People should start a bank run, but buy everything they can, and scrap everything made of copper. Create a shortage and drive the price up. Gold and silver have KYC, while copper doesn't. What say you? Could a copper Bank Run so to speak go viral? What about copper pipes and fittings? How pure are they in copper?
I definitely agree that copper will go up in value, especially due to hyper inflation and manufacturing usage. I definitely hoard any copper cents I come across as well as scrap out junk appliances for the copper. I sell my scrap copper from appliances and electronics (when I get enough of it) and use the funds from it to buy silver. I’m hoarding the copper cents until pennies are discontinued like Canada did years ago. Once they are discontinued, I’ll melt them all down. In answer to your question about purity, copper pipes that are bright, shiny and free of solder are 99.9% pure copper. 🙂🍻👊🏼
Great video brother. Nice amount of copper there.
Thanks brother! I like scrapping fans because they are relatively easy and the copper sure adds up. Thanks for watching 🙂👊🏼🍻
Well, can't say I was disappointed...lol
Good video Brother!!!
Not a lot of copper, but you know how I love COPPER!!!!!
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Thanks Brother! I contemplated scrapping 2 additional box fans but they are in “like new” condition and I’m definitely keeping at least one to replace my dirty one 🤣. Thanks for the thumbs up and comment brother!!! 😁🍻👊🏼
I’m glad you stuck with the teaser on the thumbnail
Thanks brother and thanks for clicking! 😁👊🏼🍻
Awesome video nice copper wire thanks for sharing s2c
Thanks for watching Brother! 😎👊🏼🍻
You're welcome friend
@@timsmith9645 🙂👍🏼
Fantastic video bro
Thanks again bro and thanks for watching! 😎🍻👊🏼☮️
Glad I found your channel.
Thanks a bunch! Welcome to the channel! 🙂🍻👊🏼
Hey S2C! Nice Teardown video! Bonus Aluminium to the copper is great. But everyone in your spot seems to be lazy 🤔 do u live in lazy town? 🤣🤣🤣 Anyway have a nice weekend, see u on the next vod mate!!!!🖖
Hello my friend! Thank you very much and a bit of aluminum is always welcomed, especially when I’m going after that sweet copper! Oh I can’t speak for everyone but I’m definitely lazy when it comes tedious things. Have a great week my friend and thanks for watching! 😎🍻👊🏼
Greetings from Mongolia 🇲🇳🏇
@@visionofwellboyofficial greetings from the USA 😎🍻
@@Scrap2Cast there are lots of scrapyards in my capital city of Ulaanbaatar and they pay cash 💵💵💵
Excellent! Cash is king!
Theres a more easier method when it comes to taking the blade set off of the shaft, before removing the motor support from the frame, you have to flip the fan to its back, grab the back of the center hub with both of your hands on two opposite sides, and push down. It can be a bit of a hassle while doing this, but sometimes they will come off easily. I've cleaned a bunch of fans in the past by doing this method, and it always seems to work, just giving you a little heads up the next time you scrap a cheap box fan like this one.
Hey man, thanks for the helpful scrapping tip! I’ll be sure to give it a try the next time I scrap one of those box fans out. Thanks for watching and the suggestion 🙂🍻
I thought I was your biggest fan
You just might be! Thanks for watching! 😁👊🏼🍻
Bypass the thermal overload switch and see if it smokes 🚬 the motors.😂
Hehehe 😁
OHHHHH, pyrotechnics flying. So pretty dirty.
Put that Dirty Stripper to WORK!!! Ohhh, it takes it in the hole so good. Look at those slits.
******** ********
I would honestly want to keep the Cast Aluminum stator cases.
That was more than I was expecting for those two fans.
And incase you didn't figure it out, the first two lines were RT reactions.
Lol those fans were dirty AF and the stripper like typical strippers is getting old, dirty and worn out 🤣.
Cast aluminum is a really good grade of aluminum in my opinion. Most of the impurities within the metal have already been removed prior to being casted.
Fans can be a nice way to get copper in abundance, especially if you have a ton of fans lying around. I always pick them up whenever I see them. 🙂🍻
Look at MJ here with his 1 glove 😂 quit huffing duster, it's bad 4 you😂
🤣 With the amount of brass dust I breathe in every day, regular dust should be the least of my worries!
👍👍 Happy Holidaze brother 👊🏻☮🍻🖕🏻🎰
Thanks brother same to you! Thanks for watching! 🙂🍻👊🏼☮️
I ordered a pair of those stripping pliers.....maybe they will get here someday 🤷
Got a HFT close by? That’s where I got those. Think they were $20
@Scrap2Cast oh man🫤 I ordered from eBay and got a message (hand to God, I'm not lying) that they were going to make them, then send them out, expect a 5-9 day delay. The next message says that they are finished and they are ready to mail expect them in 3-5 days.😑
How much did they whack you for?
@@Scrap2Cast 10.97 with free shipping 🚢 🤪
Then you scored a deal. Me personally, when I want something, I go right out and buy it. (Impulse buyer)
See I knew you had an Only Fans channel. LOL!
🤣 thanks for clicking and watching bro!
I think that copper will be the poor man's gold next year. People should start a bank run, but buy everything they can, and scrap everything made of copper. Create a shortage and drive the price up. Gold and silver have KYC, while copper doesn't. What say you? Could a copper Bank Run so to speak go viral? What about copper pipes and fittings? How pure are they in copper?
I definitely agree that copper will go up in value, especially due to hyper inflation and manufacturing usage. I definitely hoard any copper cents I come across as well as scrap out junk appliances for the copper. I sell my scrap copper from appliances and electronics (when I get enough of it) and use the funds from it to buy silver. I’m hoarding the copper cents until pennies are discontinued like Canada did years ago. Once they are discontinued, I’ll melt them all down. In answer to your question about purity, copper pipes that are bright, shiny and free of solder are 99.9% pure copper. 🙂🍻👊🏼
ooooooooooh you got an onlyfans lol jk jk im wondering how many others will catch on to that lol
Lmao I’m glad you got the joke!!! 🤣 Thanks for watching brother and hope you’re healing up nicely! 🙂🍻👊🏼
@@Scrap2Cast yea im healing fine. lol man i wonder who else motices
That’s good brother! Honestly I think 3 total people noticed 🤣
Fantastic video bro
Thanks a bunch brother! 😎🍻👊🏼