To find the leak, after dry, tape a hairdryer to the hole and blow cool air in the light housing. Spray soapy water around the light assembly and look for bubbles. Seal the crack with silicon.
My honda city failed in yearly technical inspection because of weak light . (water trapped in headlight while washing). searched on TH-cam and found your video. inshaAllah I will try it.
Thank you brother Do seal the edges of the headlight inside the bonett with silicone sealant to avoid rentry of moisture I had done this and had may rain drives and pressure washing till it’s working good. All the best💕
Yes brother you can leave it there until you seal headlight sides with silicon sealant But the moisture absorbing cabability will be less it won't melt by the heat emitted by headlight
Bro you need to seal the sides of headlight under the bonet with silicone sealant it will never repeat again for me one year completed no issues till now
@@Keralablatersfan2658 fogging infront of the main bulb is gone already... But lot of condensation in the extreme corner... Since there's no air movement inside the enclosure, i'm not sure whether those will go... Fingers crossed.
It will return not a good fix need to remove housing and re seal
Brother you need to seal the headlight sides with silicone sealant under bonnet area
Sorry I was not able to upload sealing video
It’s very simple buy a silicone sealant tube and apply
@@Keralablatersfan2658 hello bro.. can you please help me with silicon tube etc to fix the seal
Ye bro
I just removed the moisture from my headlight with a hair dryer, it took me a while but worked great!
Good
To find the leak, after dry, tape a hairdryer to the hole and blow cool air in the light housing. Spray soapy water around the light assembly and look for bubbles. Seal the crack with silicon.
Yes
I just sealed the edges with silicone
No moisture entry till now
Can I use rice? Tht absorbs water as well💯
Thank you straight to the point.
Welcome brother 💕
My honda city failed in yearly technical inspection because of weak light . (water trapped in headlight while washing). searched on TH-cam and found your video. inshaAllah I will try it.
Thank you brother
Do seal the edges of the headlight inside the bonett with silicone sealant to avoid rentry of moisture
I had done this and had may rain drives and pressure washing till it’s working good.
All the best💕
It worked for you sir
Yes very well til now no moisture entry also after sealing with silicone sealant
Excellent solution.
Thanks
💕😍💕 welcome
Dont forget to seal headlight sides with silicon sealant
Please subscribe and support
Sir how to remove from sealed beams because bulb or holder can't be removed
This is brilliant. Thank you!!!
Thank you brother 💕
Please subscribe and Support 💕
Sir could I leave it on there for quite a while until I seal my headlight??? Will it not melt from the heat emitted by the bulbs?
Yes brother you can leave it there until you seal headlight sides with silicon sealant
But the moisture absorbing cabability will be less
it won't melt by the heat emitted by headlight
Why did moisture become in the 1st place?
Does pouring hot water on headlight after putting the mask get us faster result ?
I don't think so
May it damage too
@@Keralablatersfan2658 ok
Marvelous Solution!!
You rocks dude.
Thank you much💕
Please subscribe and support 💕
Kya ham permanently ek pouch light mein rakh sakte hain
Nahi chahiye once all moisture gone
Do reseal the headlight edges with silicone sealant(open car bonnet and apply)
Where can we get the silicon gel bro ?
Available in online and local electronics shops
Bhai silica gel ki jagah aur kuchh nahi rakh sakte kya
Silica gel is the only solution I think
Seriously that works ? Doesn’t it mean the seal in the headlight is compromised and it will reoccur again ?
Bro you need to seal the sides of headlight under the bonet with silicone sealant it will never repeat again for me one year completed no issues till now
Good job better than showroom works may be their mistake resulted the moisture inside. 👌
Thanks
Hi! Great job. Question, do you still remember how long it actually took to see some result? If yes, for how long? Thank you!
For me it’s one year completed no issue till now
Need to seal the sides of headlight with silicone sealant after removing moisture
@@Keralablatersfan2658unsa na nga silicon sealant sir+asa ta palit ana?
@@napnacorda2308 Availlable in hardware shops Brand- Anabond RTV 666T ,Small tube availlable for this application
I have moisture in a 2019 ford escape. It was my fault. Will this work if I stick it in through the headlight hole?
Bro if it’s a single chamber it will work for sure
Is it a permanent solution?
Did it happens again?
Bro you need to seel the headlight sides with silicone sealant or replace the gaskets
Will it work in wagon r VXI
I think it should work
Because my car was baleno, it should work on all susuki cars
@@Keralablatersfan2658 Thank u soo much
Installed my facemask filled silica gel pouch now... I really hope it works in 24-36hrs
Sure it will work
If the silica gel is not exhausted it will work
@@Keralablatersfan2658 those reusable blue silica gels... freshly cooked on gas till deep blue. Hope they r good quality & does the job in 36hrs
@@alexmandal 👍🏻
@@Keralablatersfan2658 fogging infront of the main bulb is gone already... But lot of condensation in the extreme corner... Since there's no air movement inside the enclosure, i'm not sure whether those will go... Fingers crossed.
How long did you leave it in?
24 hr or until it clears
Do seal the sides of headlight with silicone sealant after clearing moisture
That's the real pourpose of the face mask! Now it's clear!
😀❤️
Where will i get silica gel?
Electronic shops and online sites
Doesnt this just remove the symptoms but not the cause?
Yes bro all the moisture will be cleared
But you need to seal the headlight edges with silicon sealant it will fix the issue for years
@@Keralablatersfan2658 cheers mate
@@useitwice thank you 🙏 please subscribe and support ❤️
Can I use rice? That absorbs moisture as well? Awesome vid bro💯
@@airupthurml2390 yes brother you can try but it may take very long time
Not a good idea to open the bulb every time.
Yes I agree. do seal the sides of headlight after this moisture removal with silicone sealant it will work for years
san bibbili nyan gel?
Kha milegi silica
Bro silica available in local electronics shops and online
Will it not ignite?
No never
Folks, face mask is becoming really handy after all
Yes
It didn't worked. I have put them for 3 days. And no resluts
Silica gel Colour changed
@@Keralablatersfan2658 nope.
@@YogeshYadavlove may be the gel already exposed to air (absorbed maximam moisture)
@@YogeshYadavlove may be the gel already exposed to air (absorbed maximam moisture)
@@Keralablatersfan2658 I bought them new
Main bulb ke side se saaf nhi Kiya krna
Bhai main bulb is not easy to remove indicator is simple and easy
@@Keralablatersfan2658 ijdiactor wala toh utna marega saaf Bahar se vaccum cleaner maar de toh nikleg mositsure
@@history5889 it will work
It's just going to get filled up again though lol
No brother just seal the sides of headlight with silicone sealant
For me it’s almost one year it’s still working
Same problem my car....baleno
Bro silica ittu clear cheythu silicone sealant idanam seal edgil
My baleno also have same issue
@@JohnsonVJose do the same and apply silolicone sealant at joints of headlight under bonet
Watching you’re video made me think that a tampon might work 🤔, no kidding
Yes may be,but the absorbing capacity will be less And the time taken may be more
@@Keralablatersfan2658 that’s true good point
@@salomonmora9383 welcome 💕
Please subscribe and support 💕
you can literally still see it has mositure though lol
No bro it worked well
@@Keralablatersfan2658 I can still see some build up though its just gonna come back best bet is either a hair dryer or taking the whole headlight off
🔥
❤️
Cheap joke 😂