they like to blow out the cylinder base gaskets with cheap gaskets always use a good brand gaskets or oem and mls head gaskets only if its a 100 mm sleeve u can use the 650l oem mls head gasket
I lost the amount of times I changed the cylinder base gasket, now the last time I home made a new one with some gasket paper a little bit thicker than the cheap gaskets and has been holding pretty well. As for the head gasket y always try to use mls as you advise but every now and then it blows it anyway because the threads on the cylinder that hold the head would strip, maybe because of the high temperatures, I haven't figured out yet 😂. Thanks for watching and sorry for the late response!!
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
Tu pilotaje a la altura de ese maquinón de los 90. Que placer verte rodar
HONDA old school ... eats every terrain and motorcycles ! Great Rider !!
La bestia eterna
Muy bueno Rodrigo!! Abrazo!
Muchas gracias!!
Excelente video, un saludo desde Gran Canaria
Muchas gracias! Otro saludo desde Uruguay!!
they like to blow out the cylinder base gaskets with cheap gaskets always use a good brand gaskets or oem and mls head gaskets only if its a 100 mm sleeve u can use the 650l oem mls head gasket
I lost the amount of times I changed the cylinder base gasket, now the last time I home made a new one with some gasket paper a little bit thicker than the cheap gaskets and has been holding pretty well.
As for the head gasket y always try to use mls as you advise but every now and then it blows it anyway because the threads on the cylinder that hold the head would strip, maybe because of the high temperatures, I haven't figured out yet 😂.
Thanks for watching and sorry for the late response!!
Would a DIY Copper Gasket do the Job??
where did you get that handlebar? it's a 28 mm I think, did you only get the riser?
En el aire bro
Got to get oil temperature guage. Have them on my XRs.
Where are y'all riding and what kind of camera setup?
Are you at the great lakes
badass
Appreciate!!
What did you change on this bike basically 😄
Mostly bone stock except for an exhaust and a FCR carb. Other than that is pretty much stock.
@@rrivero7512 A well-tuned FCR carburetor, better than fuel injection
Buen video, de casualidad no sabes de alguien que tenga una xr 250 a la venta?
Muchas gracias! Una a la venta acá en Uruguay?
@@rrivero7512 si, en Uruguay 🇺🇾
La única 250 que vi últimamente es una que está en LP año 97 creo, debía patente pero estaba barata..
@@rrivero7512 dale gracias 👍