Thank you so much for making this video. With how detailed you were with all the tools needed, and parts, it made me way more confident when ordering the parts and tools I needed as I've never done such an in depth job like the entire RSX suspension. And nothing sucks more than wanting to fix something bad and having ordered the wrong parts. Thank!
Hey man. I've been super busy and haven't had time to edit my videos. I have like 5 of them. But since you mentioned it I'll have one up either by today or tomorrow!
@@trackaholic i just installed my moog outer tie rod but when i torqued the castle nut down the hole for the cotter pin isnt exposed so i couldnt insert the cotter pin.Did you have the same problem?
I had the same issue. Most places don't sale the right ball joint. Send them back and get check Amazon for the ball joints from ALN Suspension. These fit, but the only problem is that they need to be machine pressed in or a bigger hole drilled in the control arm.
Telling. My oem ones needed a allen to have them taken off. Literally impossible without striping if your car is from a salty state. I had to grind them off.
Thank you so much for making this video. With how detailed you were with all the tools needed, and parts, it made me way more confident when ordering the parts and tools I needed as I've never done such an in depth job like the entire RSX suspension. And nothing sucks more than wanting to fix something bad and having ordered the wrong parts. Thank!
This was all so well informed bro, good stuff.
Good video bro. Did you grease the ball joints before installing them or are they ready to install out the box
Did you have to use the Honda specific adapters to remove the ball joint?
Great video very informative
I recommend Sankei 555 , they're made in Japan. That's the company Honda subcontracts.
What is the ball joint part number , and where to get it. Cause is been hard to get it locally. Please
My driver side ball joint will not come out for the life of me😩
Btw any info on your tie rods when u lowered ur ride? Ex. Shorter or too long toe in or out adjustments and any issues with bump steer? Thanks
Thank you for this, I have to do my ball joints and needed video
Ran Marsh no problem! I could've been more descriptive but I hope it helped!
No man this was more than enough. Keep doing these videos. Not to many rsx TH-camrs out there.
Ran Marsh I definitely will! I have like 6 more videos I haven't edited yet. I'm just really behind on uploading haha
What rotors and what extra hardware did u use to fit the dc5 brembo brake calipers?
Rock auto has stop tech brake lines. Got all 4 for lil over 90 bucks. Cheapest I found.
That's actually a pretty good deal. I had only seen them for $119 at the cheapest. Thank you.
Bro good video man.
Martin Guzman thank you Martin! More coming soon
What happen to the videos brother
Hey man. I've been super busy and haven't had time to edit my videos. I have like 5 of them. But since you mentioned it I'll have one up either by today or tomorrow!
How much did all the suspension parts run you? I have to do mines on my 06 base.
Do the moog outer tie rod and end links come pre greased ?
Yes
@@trackaholic i just installed my moog outer tie rod but when i torqued the castle nut down the hole for the cotter pin isnt exposed so i couldnt insert the cotter pin.Did you have the same problem?
Sergioh no I didn't come across this issue.
What's the part # on the Moog ball joints and are they 05-06 or 02-04?
yardman0001 part # is K90493 for 02-04
Sayyid will the for a 05-06 RSX?
Type s?
Good question. I believe ball joints are different for 05-06 but I'm honestly not too sure.
Yessir.
what year RXS is this? I'm having an issue where the moog ball joint is smaller than the original one on my 06 rsx type s
Armando Guzmán This is a 2004
I had the same issue. Most places don't sale the right ball joint. Send them back and get check Amazon for the ball joints from ALN Suspension. These fit, but the only problem is that they need to be machine pressed in or a bigger hole drilled in the control arm.
how much was it to rent all that from autozone?
Larry_ng about $140 if I recall. You get it all back when you return them though.
oh cool thanks! im about to do the same with my rsx!
No problem! It's super easy just take your time.
Hi,what’s the honda part number on the tie rods end? 03 rsx-s.
i fiX mY Own CaR MechaniChiX Hey, it's ES80995
Hi what are the part numbers that you used?
I can get you a list to all the Moog parts if you still need them.
You endlinks have been replaced before
Are you telling me or are you asking?
Telling. My oem ones needed a allen to have them taken off. Literally impossible without striping if your car is from a salty state. I had to grind them off.
xStr8UPDoPex oh okay I never thought of that. The car has 188k miles so I think they definitely been replaced before.
I need ball joints for my 06 type s badly . Anybody know which ones i can use , been searching forever and end up buying some ebay ones
Moog makes nice ones
For anyone else reading this- buy Moog or Mevotech from rockauto.com
Sankei 555, they're made in Japan. That's the company Honda subcontracts.
Part # for ball joint ?? type s
AM-1908548832
Sayyid is this for 05
Where did u get it from ? I cant find it for 06 type s
please do a giveaway of 5 gallon tanks