Different topic, but here is a quick answer - If you look at your drain plug there are thin metal walls sticking out left and right to the plug. Most people drill a small hole through either of those and wire the plug to that hole.
Think I have mine wired to the spring retainer on the header but those Akra headers so the location might be different from yours. Oil filter same thing
Good eye ! It’s a carbon cover that I tried out - am back to stock tank as it works the best for my riding style and body size - I could make a video but it’s so niche it wouldn’t get enough views 😬
Hmm I have not installed them , but many use them so it should be possible to get the cables out of the way. Did you check with others that installed the Alpha ones or look at the pictures from Alpha Racing and there the cables run there ?
Hey Mono Moto. So, are the Giles or Alpha racing clip ons raise bars? lower bars? closer to rider? or further away? Apologies if I missed those comments in your video.
@@MonoMotois it possible to open the stock handle bars a little bit I dont want full after market clipons i just want to know if it is possible to rotate the stock handles outwards a little bit!
Thank you for the through explanation, helped me to decide
Need you to go over where you are attaching the safety wire from the oil drain plug on the k67.
Different topic, but here is a quick answer - If you look at your drain plug there are thin metal walls sticking out left and right to the plug. Most people drill a small hole through either of those and wire the plug to that hole.
@@MonoMoto Thanks Mono
Think I have mine wired to the spring retainer on the header but those Akra headers so the location might be different from yours. Oil filter same thing
I see you have a carbon tank cover and or extender orrr is that the complete carbon fiber tank? How you liking that? And where is that vid/review!? ;)
Good eye !
It’s a carbon cover that I tried out - am back to stock tank as it works the best for my riding style and body size - I could make a video but it’s so niche it wouldn’t get enough views 😬
Where are the risers for raising bar height that Gilles usually offers ? I have them on my Bimota, 50mm Risers.Are they not available for the BMW RR ?
Sorry I have no idea about the risers
Hey mate I put the alpha clip ons on my 23 and the brake and clutch cable lines hit my dash. Any options on how to solve?
Hmm I have not installed them , but many use them so it should be possible to get the cables out of the way. Did you check with others that installed the Alpha ones or look at the pictures from Alpha Racing and there the cables run there ?
Hey Mono Moto. So, are the Giles or Alpha racing clip ons raise bars? lower bars? closer to rider? or further away? Apologies if I missed those comments in your video.
Those you can only Lowe but not raise . For closer to rider - you can adjust the angle 📐 but it’s limited if you want to get a very unusual setup
do you have a link to the adapter? I have tried Giles and other sites
Nope, there is no link you can email gilles vendors in your country with the part number to get it for you .
@@MonoMotois it possible to open the stock handle bars a little bit
I dont want full after market clipons i just want to know if it is possible to rotate the stock handles outwards a little bit!
@@FirstLast-tx3yj it’s not possible as the video shows
Problem is alpha racing is outrageously priced!
yeah it is on the pricey side!
Oh speaking off I have a set of alpha clippings for sale !
Where did you get the Giles screw in clipon adapter I cannot find it any where. Do you know the part no. pls?
Check the description ☺️