Nicely machined item, will be interesting to see if there are any more performance improvements for this rifle. Will check out the article when I get a bit more time, thanks for the link.
Nice bit of engineering as always, but the best part is yet to come as when you increase the diameter of the vent to the rear of the valve potentially you loose a little surface area for the air to push against, it will be something of interest to a lot of airgun tinkerer's out there.
Nice to see the EPIC back - I do like the idea of that valve - the results will be interesting on the closing speeds and the effect on efficiency. 1.7 bar a shot still seems a little high, but a real jump forward from factory :-) Keep up the good work, and thanks for the videos.
definitely interesting . i guess most of there gear is aimed at the higher power market so its easier for manufacturing and price to make one valve fits all so to speak . great job mate . and what a cool name spindexer that’s for sure . almost as good as sharp pointy thing but not quite 🤣🤣
Okay so SUB12 valve,,,, i had a feeling it was something like this you talked about. But i am FAC, so i just watch video none the less, and throw my thumb in the air. BTW are these regulators meant to be so hard to turn, mine is damn hard to turn VS a FX, but the regulator work just fine no issues there, but adjusting / turning it OMG someone need to make a more sizeable adjusting key / tool 700 mm long 4.5 mm CZUB barrel performing well 🙂
Thank you very much for that shout out , much appreciated ❤
I don't have an instawotsit account, however good luck in the comp - I'm sure all the practice will pay off 🙂
your welcome mate
Perfectly done for Sub 12 application.
Thank you and thanks for watching 😁
Nicely machined item, will be interesting to see if there are any more performance improvements for this rifle. Will check out the article when I get a bit more time, thanks for the link.
thanks 😀👍
Nice bit of engineering as always, but the best part is yet to come as when you increase the diameter of the vent to the rear of the valve potentially you loose a little surface area for the air to push against, it will be something of interest to a lot of airgun tinkerer's out there.
nice one, not to many people think about things like that we started small so we can work up but it will be interesting 😁
Brilliant I learn something of the internal workings every time. Love your work.
Many thanks!
Very clever work. Thanks for teaching us all.
My pleasure thank you for watching
Great video on making a better valve for sub12 use and as always, quality machine work.
The original TP was huge!
Thanks for sharing the video …
yes this gun would make some power in FAC for sure, thanks Lee
Nice to see the EPIC back - I do like the idea of that valve - the results will be interesting on the closing speeds and the effect on efficiency. 1.7 bar a shot still seems a little high, but a real jump forward from factory :-) Keep up the good work, and thanks for the videos.
thanks Tim we hope to get a few more shots out of it yet 😀
Amazing machine work. What lathe tools and inserts are you using?
yes we have all got the tools and engineering skill to do that
The Abom of airguns - impressive, as always, chaps!!
thanks for watching 😀
definitely interesting . i guess most of there gear is aimed at the higher power market so its easier for manufacturing and price to make one valve fits all so to speak . great job mate . and what a cool name spindexer that’s for sure . almost as good as sharp pointy thing but not quite 🤣🤣
🤣🤣 yes sounds like something a 70's disco 😂 yes this gun was built for power for sure
Ahhhhh it has returned 😁 looking forward to this one chaps.
thanks for watching mate 😀
Nice work, I enjoy every minute of your videos 👍🏻👌🏼
AwesomeThank you😀
once again,great video
well explained as expected👌🏼
Thanks again!
Another good video sir, best of luck to ya Christopher 👍
Thanks Christopher 👍
First class work as always Jeff, thanks as always for sharing with us Cheers 👌👌👌👌👌👍👍👍👍👍👍👍👍👍
Glad you enjoyed it
Great video excellent narration.
thank you
👍👌 Excellent stuff!
thanks for watching 😀
Very good video. Very clever.
Thanks for sharing.
thanks for watching
Do yo have blueprint?
awesome work
Thank you! Cheers!
Good , very precicision.Thks😊
thanks for watching 😀
Sweet!
thanks for watching 😁
Awesome dude 🤟
Thanks ✌️
Exceptional
thank you
Okay so SUB12 valve,,,, i had a feeling it was something like this you talked about.
But i am FAC, so i just watch video none the less, and throw my thumb in the air.
BTW are these regulators meant to be so hard to turn, mine is damn hard to turn VS a FX, but the regulator work just fine no issues there, but adjusting / turning it OMG someone need to make a more sizeable adjusting key / tool
700 mm long 4.5 mm CZUB barrel performing well 🙂
thanks for watching 😀 yes the reg will be stiff to turn especially when you have high pressures 👍
nice one
thank you for watching 😀
👍👍👍
thanks for watching 😀
Nice 👌🏻👌🏻👌🏻👌🏻👍🏻
thank you 👍
Thank you very much, I am indonesia,pengen senapan import tp blm punya uang
Bit of Edgun in there
the reg looks very similar 😁
@@sub12airgunners You need to talk to this man Симуран He does answer emails ,Mods for the Leshiy
😊😊
👍🏽👍🏽👍🏽👍🏽
thank you
🙃
Slm kenal bg
Sir I would like to speak to you over a telephone is this possible?
Thomas Deborah Walker Susan Hernandez Jessica
Great content
Have you thought of doing youtube shorts
yes we are going to try to do some 😀 thanks for watching 😀
👍🏻👍🏻👍🏻
thanks for watching 😁