that’s awesome mate . i have always wondered how you cut a hex key 👍 definitely a quality up grade . and i am with you on the polishing any type of bur cant be good metal to metal plus it looks so much better. think the brass shavings really showed the case myself
You know, the only problem with these excellent videos you make, is that because you always find ways to improve literally any rifle you get your hands on, it's hard to have any confidence in buying anything you've covered, because we now know all of the issues with every gun we look at, but can't do anything about it... :)
Most of the guns we do are very good out of the box but everything can be improved, if an item is mass produced there will always be room for improvement no matter what it is 👍
Makes me wonder why they dont start with stainless steel. And some sort of locking system. I'm wondering if the stock of drs could be modified to be able to adjust hammer spring. And how easy to I stall sling mounts on it..QD and Flush
I’m in the USA, when you decide to sell your SS hammer spring adjuster & lock shot me a link I’m willing to buy one plus shipping. Thanks you for your great work.
Hi there. I was just wondering if you could tell me the thread and pitch of the screw as I need to run a tap inside the housing as the guy who owned mine before has damaged the threads. (That's if it's a commercial size and not bespoke). Many thanks Nice work by the way. Always like to watch some turning taking place.😊
Craftsmen make it look easy, let me assure you it's not. PS. Can you do a tutorial for mounting a bi-pod to the Synthetic DRS, something that us mere mortals can accomplish?
hi, that brass one looks like the German 6flbs dreamline one but with slip washer. Unfortunately, they don't fit 12flbs DL else your kit would fit. You cant cock, hammer is longer for weight. Mind you all that would need doing is cutting it down... enjoy your vids Gary
brass is softer than steel,so it absorbs vibrations from the hammer smack, steel will transfer it to the aluminum action of the riffle. it has the same system as my 2004 fx cutlass and that riffle still shoots with the same brass hammer guide
@@tromplee6107 wont absorb vibration to any measurable degree. the only benefit to brass is if its sacrificial. cant see that being a big deal for a spring.
Brass is a better bearing material then stainless steel is. When it comes to mass production you don't want to go polish up a bunch of surfaces making the process more expensive. If they would have installed a stainless steel one with bad surface finish it would gouge the spring rather rapidly.
![[#2024MAMA] BIGBANG (빅뱅) - 뱅뱅뱅 (BANG BANG BANG) + FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/EQsYfiPR9uM/mqdefault.jpg)
Links for the lock lock tool and adjuster
www.ebay.co.uk/itm/375617375823
www.ebay.co.uk/itm/375617367019
www.ebay.co.uk/itm/375617371519
@@sub12airgunners thank you so much
Ordered this morning, looking forward to getting these on the rifle
Always great to watch a true machinist make these airgun parts.
thank you very much, it's nice to have loyal followers like you that take the time to watch and comment 👍
Clever way to cut in the hexagon key, I must remember that one. Thanks for another informative video.👍👍
thank you 👍
pleasure to watch a craftsman in action
thanks again 👍
Love your ideas and just bought the full kit to this video from eBay on your sub12 air gunners site, thanks from us sub 12 guys.Kallem
Awesome! Thank you!
Good work. A manual 3 jaw rotary chuck on the mill table is a great time saver.
Excellent video of another great component improvement. I liked the slow motion footage 👍. Thanks for posting the video.
thanks Lee
Love it...especially the bespoke tool you quickly made up :-)
thanks for watching Tim 😀
Your skills are amazing, always a pleasure to watch
Thank you very much!
Quality work as usual.. welcome addition for a few FX models that use that system
thank you 👍
Really great machine work, true craftsmen. Love watching it. 😁😁😁
Thank you very much!
Wow, love your videos, extremely informative and expertly done, Thank you.
Glad you like them!
Fantastic work as always Jeff, a true crafts man at work, great job Cheers 👌👌👌👌👌👍👍👍👍👍👍👍
Thank you! Cheers!
I'm always a bit jealous when I see the skills you have with machine work
you are very kind thank you 👍
that’s awesome mate . i have always wondered how you cut a hex key 👍 definitely a quality up grade . and i am with you on the polishing any type of bur cant be good metal to metal plus it looks so much better. think the brass shavings really showed the case myself
thanks mate yes i don't understand why people get so triggered when you say polish the spring it can only help imo
As always guys pure class love it and very nice slow mos 😉
thanks mate
It's nice to see someone who has got properly aligned tail stock on a lathe 🤣
👍 thanks for watching 😀
Nice idea and worth the effort.
thanks for watching 👍
You know, the only problem with these excellent videos you make, is that because you always find ways to improve literally any rifle you get your hands on, it's hard to have any confidence in buying anything you've covered, because we now know all of the issues with every gun we look at, but can't do anything about it... :)
Most of the guns we do are very good out of the box but everything can be improved, if an item is mass produced there will always be room for improvement no matter what it is 👍
i am thinking of that maybe add a bearing between spring and guider? so maybe more easy to fix the problem?
we have done this before and it seems to make the action very noisy
Great video i have this problem with my fx streamline do you think that these are compatible, and do you have a link to your ebay shop. Cheers Baz
not sure we haven't tried one in the Streamline
Hi,
Will you be making any more of the spring guides locking rings and pin tools for Ebay ?
thanks for watching 🙏 yes should be up soon
Makes me wonder why they dont start with stainless steel.
And some sort of locking system.
I'm wondering if the stock of drs could be modified to be able to adjust hammer spring.
And how easy to I stall sling mounts on it..QD and Flush
Thanks for the information and advice.
No worries!
Very nice work as usual mate ..
Thank you! Cheers!
Brilliant work.
thank you
I’m in the USA, when you decide to sell your SS hammer spring adjuster & lock shot me a link I’m willing to buy one plus shipping. Thanks you for your great work.
A quieter hammer kit for the Vulcan 3 is available without restrictions on their Ebay page, thanks
Hi there. I was just wondering if you could tell me the thread and pitch of the screw as I need to run a tap inside the housing as the guy who owned mine before has damaged the threads. (That's if it's a commercial size and not bespoke). Many thanks
Nice work by the way. Always like to watch some turning taking place.😊
Around 1:25 in to the video he says its a 16/1 mm thread. Hope that helps.
@@jamesdoyle8047 yes why I didn't hear that when I watched the vid I don't know.
Galvanic reaction coming your way😂
in this application i don't think so, your thinking of a 60's land rover 🤣🤣
Is that the PRO version match trigger on your DRS, if so could you give me an idea of price and where it is available to purchase.
no not the drs pro trigger it's the crown one with a little mucking around it works a treat
cheers
Please, tell me dimensions of outer thread of the Regulator housing.
Hi, I just come across your eBay shop.Just wondering.When these are coming back in stock, thank.
hi should be very soon mate 😀
@sub12airgunners I will keep eye out when they in 👍🏻
Hi, will this fit the wildcat mk1 as looks the same? Thanks
Hi not sure i have not tried one in the Wildcat😀
Really nice! Would love to get one set, can I ask what’s your eBay link?❤
Brilliant 👏
thank you
Did my loctite give up 😂😂
😂
Making for me!
Exceptional
thank you
Fantastic 😊 video,
Thank you very much!
Craftsmen make it look easy, let me assure you it's not.
PS. Can you do a tutorial for mounting a bi-pod to the Synthetic DRS, something that us mere mortals can accomplish?
Nice one 😁😁
😀
How can I find your ebay shop?
in the pinned comments 😀
Love this chanel,,,GBU
thanks you very much 😀
hi, that brass one looks like the German 6flbs dreamline one but with slip washer. Unfortunately, they don't fit 12flbs DL else your kit would fit. You cant cock, hammer is longer for weight. Mind you all that would need doing is cutting it down...
enjoy your vids
Gary
Nice!
thanks for watching
EBay store???
in the pinned comments
Hi can I have your Ebay store name or link
For me too.
They don't have any.
For now😜
Can I have your store link
in the pinned comments 😀
@@anthonydefillippis8806 in the pinned comments 😀
sand paper 😂
Why is this thing so loud???
it has no shroud or mod it's all barrel
👍🏻👍🏻👍🏻👍🏻
Any cocking handles coming to eBay any time soon ❤❤
I'm sorry but how is an air rifle as expensive as this, using brass fittings.
Stainless steel throughout should be a given.
brass is softer than steel,so it absorbs vibrations from the hammer smack, steel will transfer it to the aluminum action of the riffle. it has the same system as my 2004 fx cutlass and that riffle still shoots with the same brass hammer guide
@@tromplee6107 wont absorb vibration to any measurable degree. the only benefit to brass is if its sacrificial. cant see that being a big deal for a spring.
Brass is a better bearing material then stainless steel is.
When it comes to mass production you don't want to go polish up a bunch of surfaces making the process more expensive.
If they would have installed a stainless steel one with bad surface finish it would gouge the spring rather rapidly.