HEADSET SIZES Dane techniczne: Górna średnica rury sterowej widelca: 1-1/8” (28,6 mm) Średnica wewnętrzna góry główki ramy: 44 mm Średnica wewnętrzna dołu główki ramy: 56 mm Średnica widelca w miejscu nabijania dolnej bieżni łożysk: 39,8 mm
Doing both bearing races at the same time is a very bad idea. By doing one at a time, you are able to keep the other end referenced square to the head tube. Doing both drastically increases the chances of them not being straight and square.
ideally. usually the kit (or bottom bearing kit) will include a new crown race. you could use the old one if it is still flat and smooth and mates up to the new bearing/seal.
HEADSET SIZES
Dane techniczne:
Górna średnica rury sterowej widelca: 1-1/8” (28,6 mm)
Średnica wewnętrzna góry główki ramy: 44 mm
Średnica wewnętrzna dołu główki ramy: 56 mm
Średnica widelca w miejscu nabijania dolnej bieżni łożysk: 39,8 mm
Doing both bearing races at the same time is a very bad idea. By doing one at a time, you are able to keep the other end referenced square to the head tube. Doing both drastically increases the chances of them not being straight and square.
If they aren't square that would suggest the frame isn't either
Thank you!
@@flux_core_fx enjoy bro 😎
Meu quadro é soul sl329 essa caixa de direção pega nele?
Thanks! Which diameter rings did you use to press in the bearing cups?
Hi what grease did you use?
can't you just replace the bearings without needing to press those new bearing holders?
Yes, you can replace only bearings, but this video will show you how to montage full setup 😉
cannondale cujo 2?
no idea
Do you need to install a new crown race on the fork?
ideally. usually the kit (or bottom bearing kit) will include a new crown race. you could use the old one if it is still flat and smooth and mates up to the new bearing/seal.
CAN THE OLD HEADSET BE USED WHEN FIXING A NEW DIFFERENT FORK( MOUNTAIN BIKE SCHWINN AL COMP)
perfeito top. top.
Thank u
Can you tell me one park tool grease or any grease that I can use to assemble a bike and can apply everywhere
Try Decathlon red grease.
what about that part of metal which i have on the fork
you need to remove it too. its part of the headset and may not be compatible with the new one
Please share the link to buy this kit in Poland. Thanks
Neco headset?
allegro.pl/oferta/stery-polzintegrowane-tapered-maszynowe-neco-h383-11619942490
@@lonerbikes thank you
What size the headseat ? 55mm or 52mm
Check link in description,
What size is that headset
You have pinned commen….
How can we know our mtb's headset size please tell me
Visual check and measurement with caliper 😏
measure the inside of the openings of the frame withe the headset completely removed
HEADSET
Buying link ?!
Very helpfull. Thx
😉
hope you could have proper tools
What exactly ?