AHeadset Installation

Installing a threadless headset (AHeadset) on the Kona Muni-Mula.
The Aheadset contains the upper and lower sections, star nut to put into the steering tube and the headset cap and bolt to preload the bearings.
Always put grease on the headtube and bearings to prevent seizing and corrosion.
Let’s begin with the installation of upper and lower cups
The fork already has the star fangled nut and crown race installed. However, the seal doesn’t fit with it (the crown race), therefore, it has to be replaced with the one that comes with the headset.
Place the seal on the fork and finish it up by putting the rest of the parts in order.
Danyo Sports Channel Episode 138
TH-cam: / danyosports
Reddit: / danyosports
Facebook: / danyosports
Instagram: / danyosports
Twitter: / danyosports

[@yurii313]

Today was the first time I serviced a threadless fork all by myself. Your clear instructions made it easier to grasp, enabling me to learn something new. Thank you!

[@ronnyd89]

The best part of the video is you using a homemade press. Def stealing that idea!! Hello, Ace Hardware?

[@delano007100]

How come you didn't show how to install the crown race

[@ahmadabdulwahid9148]

With pipe i guess

[@altix5337]

Very informational my man. I was wondering why it didnt work until your video appeared❤❤

[@genXcripple]

any idea why a ritchie logic threadless headset would utterly lock an old marzocchi bomber into the frame? the fork will NOt come loose as if a lock ring is holding it in? i can’t pull the top cap/ring of headset that hold the bearing in? would it be so tight as to not come free with hand level effort?

[@RICH_FROM_WORK]

Nice one Danyo!

[@newttella1043]

Good info. Aheadsets are still quite common.

[@GeetaDevi-ij8fk]

what is the size of headset bro?

[@bongryanastudillo8604]

What size of ur headset?

[@katrinagarnett5290]

Great video, where did you get the headset please?

[@joseph8208]

That's such a clever idea

[@kimvigieconcon2856]

Hi,I'm new here at your channel,what tool do you use?thank you🙏

[@delano007100]

Was that a homemade tool you used to press the cups? If so nice I'm gonna make my self one it looks like the washer on the tool is a little bit recessed m'i right? Not flat

[@Chepaww]

Thanks now I can repaint my frame

[@Sanel_Ramovic]

Perfect super!!!!

[@chotu_bhaiya66]

Can we install threadless fork in threaded cycle

[@DanyoSports]

No, most of the threadless forks are 1 1/8”.

[@chotu_bhaiya66]

But I want to Install threadless fork how can I do it

[@varunbodake8680]

Good

[@lifeofvillage7804]

এটা সব সাইকেলে লাগানো হবে তো

[@jamessmith6220]

I wish you would describe the order you are putting the parts on. That's why i came here. :(

[@bandy-sk5889]

Forgot a hammer