Lepus Nerf Blaster | Build Guide
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2020
- The Lepus is extremely compact, mag-in-handle, full auto blaster designed by JackRabbitNerfer. Rate-of-fire range is 5-50 darts per second. The Lepus is a great secondary blaster.
Stuff you can get at Frontline Foam:
Lepus DIY Kit (follow along exactly with the video): frontlinefoam.com/product/lep...
Lepus Hardware Kit: frontlinefoam.com/product/lep...
Lepus Printed Parts: frontlinefoam.com/product/lep...
Lepus STL Files: frontlinefoam.com/free-stl-fi... - กีฬา
![[VS] Semi-auto vs. Full-auto | Which is Better in Nerf?!](/img/n.gif)
**Remember to ALWAYS support (or try to support) the motors when pressing down on the flywheels. You could damage your cage if the motors aren't supported adequately!** Good luck with the build!!
LEPUS DIY KIT: www.frontlinefoam.com/product/lepus-diy-kit/
LEPUS HARDWARE-ONLY KIT: www.frontlinefoam.com/product/lepus-motor-setup/
Absolutely loving all of these build guides y'all are posting
HW kit's on it's way and the parts are printing right now. This video is a lifesaver !
EXCELLENT! It's obvious that you've done this a few times! As a thanks, I'll be ordering the hardware kit from FrontLine. Postscript: I got the 5 darts/sec motor and although fun, I regret not going over the top with the 50 darts/sec motor. The good news is that the motors can be made to be easily interchangeable.
best build videos I have found. Good job!
Printed the parts and ordered a kit yesterday along with 4 talon mags. As soon as y'all get more flywheels in I will be anticipating a package.
Did you get it yet
@@hxd9321 I did! The package came in middle of last week and I got the blaster assembled yesterday. This is my first printed blaster and it is a ton of fun. For the second or so that it takes to empty a magazine it is real rush.
@@BaddDukk oh awesome! What kind of printer you have?
@@hxd9321 I have a Prusa i3 MK3S+. I printed the black parts in the video in Geeetech Black PLA and he tan part in the video in Geeetech Silk Yellow PLA. It came out great.
Y'all. If you don't have a vise like that, you can use a bar clamp. The jaws of a ratcheting squeeze-type bar clamp are usually plenty wide to hold the 2 switches in place while you curse at the soldering.
If you plan on building one of these make sure to wire the pusher motor exactly the same way he does in the video. Otherwise, the motor will spin in the opposite direction and jam up against the magazine.
How can you tell ... The embossed dot? Looks like I accidentally got it right.
Ummm. Duh....
weird question: I noticed that there were some holes behind the pusher wheel for what looked like provisions for a switch at around 33:46 . would I need an additional switch and wiring if I wanted to build a say 8rps build to make sure the pusher resets its position? thanks in advance
You guys ever have the worker wheels be ridiculously tight on the motor shafts? I had to do battle with mine for like an hour last night and one still isn't quite on all the way.
I’ve purchased a kit to build, and I am looking into a new soldering iron. I was wondering what type you used in this video?
I'm not sure what he's using, but if you want a good recommendation you can't go wrong with, get a hakko fx-888d. They're very reliable and tried and tested. The Weller we-1010na is also a really solid benchtop setup.
For a nice small portable one but still dope AF, look into the TS80-P. It runs off a LiPo or USB-C, heats up in like 2 seconds, and cools down on it's own to a standby temp rapidly when you set it down so you won't burn yourself as easily.
Personally the TS-80P is incredible but not for your ONLY soldering iron. I'd go with the hakko for your main rig.
What type of micro switches do you use for the triggers?
Do you need an extra motor for the lepus to work ?
It would be nice if there was a note in the kit saying how long to properly cut these wires into 3 pieces so I can have the proper length instead of having to feed it in and mess with it. There’s not much wire to play with either. Either way, nice video thank you.
Pwicked my fingul.. LOL. I've gotta build one of these..
@Frontline Foam What ist the size of the motorscrews?
Thanks for the help but showing the screw sizes would be helpful
I NEED THIS
I noticed that y'all don't use a LIPO alarm. Is that ok to do?
I'm building this now. I printed my own parts and bought a hardware kit. Two things that I wish there was info on are: 1. Where's that switch spacer stl? 2. Where to cut the wire that is included in the kit? I'm pretty sure I messed up my lengths from following this video lol. Not a big deal because I have wire but would be good to know for other people
How would you mess up the lengths by following the video
Damn that tip flew off lol
Ok, ive built it and everything seems fine, but when i connect the battery and click the switches nothing works. Ive taken it apart about 3 times and checked everything, I’ve re-done it 2 times. Im not sure what the problem is. I think its the batt. Ive used the lipo tester and it says all the cells are about 4.20 the only thing i can think is if i need to charge them more?? Any ideas? Im stuck :(
Check continuity through your rev switch - make sure the common and n/o connect when the switch is pushed. It may have been overheated while soldering it and is pooched.
Do not charge a LiPo battery over 4.2V it can damage them. There’s another issue somewhere forsure.
I'm gonna make one once I fix my 3d printer.
Do you think you would distribute the Sobek 2.0 if the creator agrees?
We've looked into it. We have a lot of projects in the works right now already... but good to know you'd be interested
Does the lepus diy kit come with a talon mag?
No
does anyone know what kind of wires hes using or if theres a specific wire?
18 AWG wire
Hey what switches are these? I bought a hardware kit but then they broke.
they look like limit switches without the flap but I believe you can use limit switches in place of the ones that came with it. At least I am going to try them.
I know, I know, Late to the party.
If there’s a group of people in a small area you can use this for that and get them out
Is anyone else having issues with their pusher catching on talon mag lips? I can't seem to figure out what's going on with mine, it'll fire like 3 or 4 darts with no issue and then get stuck
Yes I have the same issue what did you to to resolve it
@@slushblaster7523 I swapped the wires on the n20 motor, my pusher arm was rotating the wrong way
@@reedpratt1985 same i fixed that issue but i still seem to have a problem with the pusher/ motor not being able to get darts out of the mag. maybe the mag spring is to stiff on my 18 count straight talon. the pusher might be jamming between the mag side and dart. i do have the highest rpm motor so less torque. i might shave me pusher rod and and/or side of mag
@@reedpratt1985 yep! we just went through this. we swapped wires on pusher motor and it solved it. there's a little + for we had the black wire on +. swapped (so red was on +) and it's good now!
I feel like you might benefit from some handy hands
akimbo these
Do a 360 no scope with it