The Jupiter continues to be popular, especially now that the Proton Pack has been unleashed. I can't wait to see a legion of Proton Packs in the next major HvZ. - Perry
I’ve built a ton of these blasters for my son and I and then many for our local Nerf club members. This tutorial makes it stupid simple and though I’ve built several since you all added the connector on the pusher, I just bypassed it. Now I see for a pusher swap that’s a really cool feature. AWESOME job with guide Luke and OOD’s!
Luke and the OOD team were incredibly helpful getting my Jupiter to me here in Canada. I am going to be assembling it very soon and really looking forward to it.
Dude I just got one of these and put it together immediately and I f**king love it thank you so much and as an added bonus it was surprisingly easy to put together I'm just bad a soldering but this gave me some much needed practice and I couldn't use my pointer finger or thumb on my left hand because I burnt them while soldering so I can confirm this is a good and straight forward kit
One day I will get and build one of these. Unfortunately me being visually impaired means I am garbage with a soldering iron, so I'll need to come up with something but hey. Great video as always
At 7:30, the two tabs were bridged by solder at the board even after I clipped it flush. I didn’t catch it until I tested the pusher motor at 9:15. Both red and black wires started smoking within 1 sec of touching the battery. I was able to fix with dremel, should have used soldering iron though.
This is really great guide but why you solder the negative cable to the switch? in my opinion you just need to solder the negative cable in to the fly wheel motors!
Luke and Tarik made the final design in Autodesk Fusion 360. Individual plans are free and there are a lot of tutorials out there, so it's a great place to get started. - Perry
@@outofdarts thank you very much don’t mean to bother you any further but are there any channels you could recommend for 3D modeling tutorials because I have been having trouble doing so
Nice video! Why do you connect the black wire to the top switch(not omron) on Nc. The feeder motor allready have negative. I do not question ur layout i just want to learn.
What type of lubricant is used here? I see the brand is Super Lube, but they have lots of lubricant blends and chemistries. I'm looking for something that is good for PETG to PETG lubrication and does not deteriorate the parts.
I purchased one of these blasters but I accidentally picked the lowest speed without thinking, is there a way I could change this once I receive my blaster?
Thanks for pointing it out! The rev trigger is a lever switch and the firing trigger switch is a button switch. During production, we accidentally grabbed a lever switch from the wrong bin. The kit should always include the correct switches. - Perry
My grandson and I built our jupiter after watching the several times before assembling and during the building process. Unfortunately it is not working. I watched the video several more times but still doesn't work. The solder connections seem to be perfect, battery charged. The only thing different was the red and black wiring from his example. We soldered the yellow piece for the battery both ways to make sure and still the motor doesn't turn. Any help or suggestions?
Everything included and not included is mentioned in the beginning of the video and in the shop listing. Additionally, when you purchase the blaster, there will be documentation that tells you what parts should be in the kit. - Perry
@@outofdarts it's the handle and I'm thinking it could also be the soldering job as well as the solder my handling your handling a video and not the same
That battery model has the wrong connector to fit with this blaster. Our own 2S Graphene 950 that we sell on the shop will work as we ordered them with the correct (XT-60) connector.
The Jupiter continues to be popular, especially now that the Proton Pack has been unleashed. I can't wait to see a legion of Proton Packs in the next major HvZ. - Perry
You mention a schematic, where would I find it?
I will not buy it becase it is too overpriced
Question: can a flywheel motor span board be used for the motor cage in this blaster?
@@djacircarvalho8251 filament costs a lot
Doesn’t 3s have more power
You know it’s a good video when you can’t tell if it’s voice over or not
Watched this entire thing, despite not being into Rival. Great guide!
I’ve built a ton of these blasters for my son and I and then many for our local Nerf club members. This tutorial makes it stupid simple and though I’ve built several since you all added the connector on the pusher, I just bypassed it. Now I see for a pusher swap that’s a really cool feature. AWESOME job with guide Luke and OOD’s!
Just used this to help me build my Jupiter that arrived today.
Luke and the OOD team were incredibly helpful getting my Jupiter to me here in Canada. I am going to be assembling it very soon and really looking forward to it.
I'm not even gonna put this tutorial to use but still gonna watch it XD
This was my holiday break project, its lots of fun
Dude I just got one of these and put it together immediately and I f**king love it thank you so much and as an added bonus it was surprisingly easy to put together I'm just bad a soldering but this gave me some much needed practice and I couldn't use my pointer finger or thumb on my left hand because I burnt them while soldering so I can confirm this is a good and straight forward kit
Great Video! This Channel Is GREAT!
Hey Splatter Shot! Your Nerf wars are so cool, I Subscribed
@@user32041 Thanks!
The hardware kit has been sitting in a drawer for months but I finally got mine built. The video was very helpful
One day I will get and build one of these. Unfortunately me being visually impaired means I am garbage with a soldering iron, so I'll need to come up with something but hey.
Great video as always
Love from Indonesia
Your wire stripping tool is very cool
just got build kit and love it thanks for using you're time to make this video
for anyone watching, this is now a hardware kit and i'm the reason the hardware kit exists
I already have a Jupiter, but I was a fool who chose 2s. Guess I'll have to purchase an entirely new one. 😁
Why
So helpful thank you!
I think I already know what I want for xmas jajaja
This is awesome!
YESSSSSS
great guid man
At 7:30, the two tabs were bridged by solder at the board even after I clipped it flush. I didn’t catch it until I tested the pusher motor at 9:15. Both red and black wires started smoking within 1 sec of touching the battery. I was able to fix with dremel, should have used soldering iron though.
Hey perry or Luke, do u think the Nemesis is a good pick
This is really great guide but why you solder the negative cable to the switch? in my opinion you just need to solder the negative cable in to the fly wheel motors!
By doing it this way, when you let off the trigger the motor sees negative on both poles and will electrically brake.
nice man
Is there a complete hardware kit without the 3d printed parts?
Does anyone know why out of darts jupiter's highest rate of fire turn to 10/s,where's 12/s???Love from Taiwan.❤
Any chance we can get the STL files for purchase?
Hey I was wondering what modeling software was used to design the Jupiter because I’m looking to make a 3D printed nerf gun of my own
Luke and Tarik made the final design in Autodesk Fusion 360. Individual plans are free and there are a lot of tutorials out there, so it's a great place to get started. - Perry
@@outofdarts thank you very much don’t mean to bother you any further but are there any channels you could recommend for 3D modeling tutorials because I have been having trouble doing so
@@armodz938 Maker's Muse is a great place to start.
Is there any way to find the stl?
why is it filmed in only 360p?
@@japplefilms3514 ok thanks
I wanted to get this out ASAP, so I didn't wait for TH-cam to finish Processing. Rest assured it will be available in 4K soon. - Perry
When you buy it du i hav to asamble it
No, you don't have to assemble it. We offer the Jupiter both fully-assembled/ready-to-fire and as a DIY kit.
Nice video! Why do you connect the black wire to the top switch(not omron) on Nc. The feeder motor allready have negative. I do not question ur layout i just want to learn.
When the top trigger is not pushed u get neg on both motor connections for the feeder/pusher
What type of lubricant is used here? I see the brand is Super Lube, but they have lots of lubricant blends and chemistries. I'm looking for something that is good for PETG to PETG lubrication and does not deteriorate the parts.
The specs for the superlube we used is the one we carry on the shop. I believe it's safe for both PLA and PETG. - Perry
I purchased one of these blasters but I accidentally picked the lowest speed without thinking, is there a way I could change this once I receive my blaster?
Shoot us an email! orders@outofdarts.com
We'll be better to help you there.
@@outofdarts thank you!
Do you sell the Hardware kit with out the printed parts? For those of use who can print ourselves. btw that print quality is amazing
Is there like a pre assembled blaster 8n your website?
At 4:40 it looks like you remove the metal tab from the firing switch but don’t show it or say anything about it.
Thanks for pointing it out! The rev trigger is a lever switch and the firing trigger switch is a button switch. During production, we accidentally grabbed a lever switch from the wrong bin. The kit should always include the correct switches. - Perry
Mine didn’t come with the correct switch so I had to break it off
Is there a way to get a prebuilt order do you have to build it urself
Yep! we now have them fully assembled on the shop!
I have a question: how can I download the models? I'm new here and don't know how to do it.
has anyone make it to a arm mounted gun or shoulder mounted gun?
My grandson and I built our jupiter after watching the several times before assembling and during the building process. Unfortunately it is not working. I watched the video several more times but still doesn't work. The solder connections seem to be perfect, battery charged. The only thing different was the red and black wiring from his example. We soldered the yellow piece for the battery both ways to make sure and still the motor doesn't turn. Any help or suggestions?
Hi! Shoot us an email to orders@outofdarts.com and we'll be better able to diagnose what's going on. - Perry
i want the pre built one but they so pricy
Anyone know how to fit the 3s lipo in there ?? I bought the one that was recommended and can't fit the alarm and battery and xt at all
Which LiPo did you purchase? The ones on the listing should fit the battery compartment without any additional parts or modifications.
@@outofdarts I purchased the recommended 3s lipo (turnigy 1000mah 25- 50c 1.0)
Do you have to buy the insides separately, like the batteries and springs And does the mag come with the pack *pls respond*
Everything included and not included is mentioned in the beginning of the video and in the shop listing. Additionally, when you purchase the blaster, there will be documentation that tells you what parts should be in the kit. - Perry
pew
Sad that my phone doesn't give notification alarms anymore 😔
First
I wonder if anyone has used the proud papa for the foregrip on the nexus pro since its just a picatinny.
30 mins?!
zeus
Sorry this didn't work for me.😵
We're sorry about that! In order to improve, what about the tutorial would you like us to do differently? - Perry
@@outofdarts it's the handle and I'm thinking it could also be the soldering job as well as the solder my handling your handling a video and not the same
I wish the pre built Jupiter was cheaper
ya
its like 170 right
@@sweetandsour6521 yeah
@@sweetandsour6521 I think it’s close to 200
@@lukej4897 ya ik
Will a 2s graphene 75c panther 950mAh work with this gun
Guys please make this comment go to the top I need to buy a battery soon
That battery model has the wrong connector to fit with this blaster. Our own 2S Graphene 950 that we sell on the shop will work as we ordered them with the correct (XT-60) connector.
@@outofdarts but u don’t ship to England
So what should I do
Will a 1s battery work with the 2s model
I bought the 2s model
First