FR-1 Viper Build Guide | Nerf Blasters
ฝัง
- เผยแพร่เมื่อ 10 ก.ค. 2024
- Step-by-Step guide to building your own Nerf Viper revolver, designed by Freedom Blasters.
You can get your own Viper kit here: frontlinefoam.com/product/vip...
Viper Printed Parts Kit: frontlinefoam.com/product/fr-...
Viper Hardware Kit: frontlinefoam.com/product/fr-...
Print your own (Free STL files): frontlinefoam.com/free-stl-fi... - กีฬา
![[REVIEW] FR-1 VIPER (A 3-D Printed Nerf Micro Flywheel Short Dart Revolver)](http://i.ytimg.com/vi/bV5QEaZE2Ko/mqdefault.jpg)
**Remember to ALWAYS support (or try to support) the motors when pressing down on the flywheels. You could damage your cage if the motors aren't supported adequately!** Good luck with the build!!
VIPER KITS: www.frontlinefoam.com/product-category/freedomblasters/fr-1-viper/
How did I end up here? I don’t even have a 3D printer.
Great tutorial
i didn't used to have a printer either... 👀
When I assembled my viper I fed the wires through the other side of the wire channel before soldering the motors. It was much easier feeding them straight through the hinge side and pulling the excess wire back out once everything was soldered than shoving them through the cage side hole and trying to turn the floppy silicone wire then shoving it down a few mm at a time. Alternatively one could cut the channel open then epoxy the wires in place.
Thanks! I did the same thing and it worked great, especially since it was a full length viper.
Sorry to be so offtopic but does any of you know of a method to log back into an Instagram account..?
I somehow lost my login password. I love any help you can offer me
@Jason Kyler Instablaster :)
@Titus Ariel thanks for your reply. I found the site thru google and I'm trying it out atm.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
@Titus Ariel it worked and I actually got access to my account again. Im so happy:D
Thank you so much you saved my ass !
As much as I appreciate your service and willingness to make a guide video. This is needs some work. No explanation of which screw used where, no indication wether the dot on the motors is relevant, no mention of what battery is used for testing. Just general lack.
You also didn’t link the flywheel tool you said you would.
For anyone else seeing this, I used a 1/8’ drill bit and the rods fit was significantly tighter than his was. Similarly it seems the one I was given was too long as it still had 5-6 mm poking out one side and was about to bust through the other. Still useable but if you have any concerns about cracking I’d go for the 9/64’.
Congratulations
That is one awesome knife! What kind of knife is it and where can I get one?
Does this come with enough wire to do the heavy viper if I order the hardware kit?
why does it make that loud sound when u shoot the bullets?
Can we use mk8 pigeon cage for motor spacing
Just Say Jerry You can indeed. The viper and pigeon share similar geometry.
what is the break lock pin called. I have no idea where to find a pin like that
did you find it? im still looking and I don't really want to buy a fifty dollar kit just cause I cant find the name of a pin
I use a ordnery nail that was the same thickness. The up size of using a nail is that you can have it stick out of the hole while you assembly to blaster just encase you mess up. Then when you are finished you can cut it to size. I bought a premade one and I can't tell the difference.
It's a stainless steel dowel pin. I used 3mm x 18mm, though i had to enlargen the hole very slightly with an 3mm drill bit to get it to go in without force
what battery did you use?
frontlinefoam.com/product/3s-1300mah-45-90c-lipo-xt-60-connector/
Is it not possible to print the flywheels?
It is *possible*, but since these flywheels are actually spinning at greater RPMs than most flywheels, inconsistencies would be more noticable and harder to correct as well.
Which printer do you use?
Prusas!!
@@FrontlineFoamBlasters do you think I could print one with an ender 3 v2?
@@kaiserwilhelmii.9076 you 100% can. I'm printing one on an ender3pro
Do you have a thingiverse file for the flywheel spacing?
it's in the viper Files on Thingiverse:www.thingiverse.com/thing:3621882
looks nice..i would paint the gun tho i don't like the colors...
i can't do this my self ...
how long does the battery last?
i would smash my nephew with this gun...
evil laugh..
kit from FrontLine $35 bucks for pins screws and springs what a joke