Just got back from a test drive after the install and a quick learn, it’s everything you say it is. My truck never shifted this well! Pleasure doing business with you, the core is going in the box for its return trip to you. Thanks again!
Just ordered this HDVB, solenoid, filter adapter and cooler bypass upgrade. Thank you for all the time you have in on this. Keep doin' what you do, we appreciate ya!
Great video!! Really appreciate you folks. Say, what holds the solenoid pack to the back of the valve body? No screws? Please keep up the stellar work you guys and Thank you. Bless you all. Bill 😎👍
My 2015 ram 3500 has 160k miles now and transmission still works as it did new with only the common issues they all seem to have. It’s been serviced 3 times by me running synthetic fluid. Is it good to change this with that mileage?
This is a great upgrade to those trans. Even though you haven’t had an issue, these valve bodies are very problematic and this corrects those common issues.
The end of this video shows the quick learn procedure but no we have never done a video showing how to tune the trans. We offer other tuners trans tunes, we don’t actually tune here at Tbred.
@@thoroughbreddiesel Got it. I thought I heard you say in the video that you were going to do a trans tune on it. I purchased transmission tuning when I purchased the EZLink. Have no ideal how to use it. That's why I was looking for a video of it being done.
Awesome video man, very instructional. I have my zero flex valve body sitting at the house for my 2019, going to be installing tomorrow. Have the upgraded pan and filter screw. I have a mm3 instead of ezlynk. Is there any difference in install/quicklearn for the 2019 vs 2018?
Tough accent, but I’m generally tracking! I had a check light on that showed for shift solenoid D. Is that the solenoid in this video? I’m a newbie on transmissions. Why should I invest $1300+ on a replacement?
Thanks, accent comes with the dirt im standing on lol. Shift SOL D is a individual shift solenoid of the valve body, this is the control solenoid we replace. This particular replacement fixes so may problems these transmissions have in a one stop shop for lack of a better word.
Im running a higher trans pressure tune in my 19 2500 (stock hp). I did this after adding 37's as i was told it would be better for the trans. Ive noticed it shifts a little harder (even after relearn). Was told this was normal as the clutches will slip a little less. I want to start building my 68 and was thinking the revmax valve body and pan would be a good place to start. Also moving to 4.30 gears. After install, should i still run the higher pressure trans tune or go back to normal?
So I called today to order the revmax valve body and solenoid pack but I was wondering, can you recommend a budget scanner that can do the relearn on the transmission? Or tuner that can perform the relearn.
I have a 2017 ram 2500. Adding this valve body, deep pan, filter, filter billet screw on nipple, and thermo bypass...question is, do I need a tune? And if not, how do I do the relearn?
I have got 2010 3500 with the 68rfe with 140K . The truck is recently tuned with EFI LIVE with the transmission tune also. I am getting ready to install a deep pan and was considering the this VB. I have read that with a transmission with this many miles.. the new VB can cause issues with clutch paks wearing faster and other issues with the higher line pressures...your thoughts?
I have a 2013 2500 with 150k miles on it. All stock not even an exhaust. Truck shifts good still. Would adding this on now cause any issues being that its higher mileage?
If I’m running a mini max with delete and I’m running the trans tune they offered. I should leave that pressure plug/bolt removed? Is that correct? Than you
I have a 2022 with 195k miles on will this upgrade affect anything being so high mileage? It shifts fine, if i were to do it would be just preventing upgrade. Any thoughts? Thanks!!!
Mileage wont be a deciding factor on it, however this corrects a design flaw in these transmissions. I think with your truck being such high mileage for its age, its probably had a lot of highway miles with a minimal number of shifts. We have seen highway mile trucks survive very well with the 68’s and nothing done to them. This VB would carry you even farther without flaw.
yes all 90% I would say towing highway miles. Would you still recommend getting a VB? Also adding a bigger pan like the revmax one for example and having to add more fluid at that point, wouldn’t the pressure inside the transmission cause to raise ? Or it dose not affect anything having more fluid flowing to components . Thanks for the reply !!!! Enjoying your guys videos
Need help. Installed a RevMax valve body and new solenoid. Shifting fork is on the cable arm. Turned on the ignition and the "P" is flashing, not in park. Torn it all down reinstalled everything again. Same issue. No clue what's going on, any ideas?
@@thoroughbreddiesel no sir. Finally got a hold of RevMax. They said it should start even though it's not showing in park. If it starts do the quick learn and it should go away.
I have a 2013 3500 6.7 with a 68rfe… 89,000 miles got the dreaded p0868 … look in fluid is low….. no issues up to this point with the trans…. I got do a complete fluid change and filter…. Get it hot run it up the road after filling the fluid and the fluid is like disappeared…. Is this a valve body problem typically or something worse. …. All my CVI are in normal ranges
OBD Mx+ for your tool and Alpha OBD for android Or OBD JScan for iOS. I purchased a $29 license from OBD JScan that was linked to my Vin number for best results
Just got my valve body , solenoid Pack , filters , deep trans pan today. Great video What trans fluid is best Great video thanks for the help with the phone sale very helpful.
That’s what we did and it was great. We assumed we’d probably need to tune to feel a big difference but we were very impressed as it sits in stock form.
@@thoroughbreddiesel did you install the optional 5x5m hex screw to keep line pressure at 160psi I have the 301A revmax valve body and don’t know if I should install that hex screw if I am running pedal monster
@@thoroughbreddiesel can I just buy the HD valve body is I only use my truck for work .im not sure if I need the zero flex valve body if I’m not doing any high performance upgrades on my truck
It was simple enough for me I did it in my driveway.. I'd offer to help but I am in Texas.. just take your time and don't rush anything, and keep track of your hardware. Also remember everything is torqued in inch-pounds
I went to change my vb and the engine light turned on and it won’t let me get get into drive and I tried doing the quick learn it keeped saying something went wrong
@@thoroughbreddiesel 99% sue I’m gonna order one of these next week. My 15 ram 3500 with 160k miles still works great but has had that 3/4 or 4/5 flare feel since new. I’m gonna do this valve body to try and keep it going better a few years
🔥 Want a RevMax 68FE High Performance Towing/HD Valve Body? Order One Today! www.thoroughbreddiesel.com/revmax-valve-body/
Just got back from a test drive after the install and a quick learn, it’s everything you say it is. My truck never shifted this well! Pleasure doing business with you, the core is going in the box for its return trip to you. Thanks again!
Fantastic! Great to hear!
How did you do your quick learn
Does this void my warranty?
Just ordered this HDVB, solenoid, filter adapter and cooler bypass upgrade. Thank you for all the time you have in on this. Keep doin' what you do, we appreciate ya!
Awesome! Thank you!
I love the trash can lid drain pan.
Great video, just did mines this weekend. Monday I will do my quick learn before starting and driving. Thoroughbred diesel does an outstanding job.
Thanks! Glad we could help!
the Easy Link tuner the only way to do the quick learn?
@@loganmadlin2672 Completed this process with a Autel scanner, Thanks
This man is like a master surgeon
LOL, thanks!
Great video thank you for the step by step procedures
It has through screws holding it to the VB. Thank you for the kind words!
Great video!!
Really appreciate you folks.
Say, what holds the solenoid pack to the back of the valve body? No screws?
Please keep up the stellar work you guys and Thank you.
Bless you all.
Bill
😎👍
Does the rev max valve body comes with an extension for the filter?
So does your oil capacity increase with the deeper pan or…? Didn’t hear that part.
My 2015 ram 3500 has 160k miles now and transmission still works as it did new with only the common issues they all seem to have. It’s been serviced 3 times by me running synthetic fluid. Is it good to change this with that mileage?
This is a great upgrade to those trans. Even though you haven’t had an issue, these valve bodies are very problematic and this corrects those common issues.
Just installed a Revamp I bought from you guys. Did you ever do a video on tuning the transmission?
The end of this video shows the quick learn procedure but no we have never done a video showing how to tune the trans. We offer other tuners trans tunes, we don’t actually tune here at Tbred.
@@thoroughbreddiesel Got it. I thought I heard you say in the video that you were going to do a trans tune on it. I purchased transmission tuning when I purchased the EZLink. Have no ideal how to use it. That's why I was looking for a video of it being done.
Awesome video man, very instructional. I have my zero flex valve body sitting at the house for my 2019, going to be installing tomorrow. Have the upgraded pan and filter screw.
I have a mm3 instead of ezlynk. Is there any difference in install/quicklearn for the 2019 vs 2018?
I am not familiar if the MM3 has the quick learn option.
Tough accent, but I’m generally tracking!
I had a check light on that showed for shift solenoid D. Is that the solenoid in this video?
I’m a newbie on transmissions. Why should I invest $1300+ on a replacement?
Thanks, accent comes with the dirt im standing on lol. Shift SOL D is a individual shift solenoid of the valve body, this is the control solenoid we replace. This particular replacement fixes so may problems these transmissions have in a one stop shop for lack of a better word.
Would putting a mopar one be better??
Im running a higher trans pressure tune in my 19 2500 (stock hp). I did this after adding 37's as i was told it would be better for the trans. Ive noticed it shifts a little harder (even after relearn). Was told this was normal as the clutches will slip a little less. I want to start building my 68 and was thinking the revmax valve body and pan would be a good place to start. Also moving to 4.30 gears. After install, should i still run the higher pressure trans tune or go back to normal?
With Revmax, you can run trans tuning and the VB will be capable of producing 325 psi of line pressure with proper tuning.
Does the valve body make shifts harder? Or does just take the lag out between shifts?
The shifts are little firmer but the lag between shifts is really corrected with tuning more than anything.
So I called today to order the revmax valve body and solenoid pack but I was wondering, can you recommend a budget scanner that can do the relearn on the transmission? Or tuner that can perform the relearn.
Give us a call 859-737-4966.
I have a 2017 ram 2500. Adding this valve body, deep pan, filter, filter billet screw on nipple, and thermo bypass...question is, do I need a tune? And if not, how do I do the relearn?
No tune needed, and we talk about the relearn at the end of the video. You will need a scanner to be able to do this.
I have got 2010 3500 with the 68rfe with 140K . The truck is recently tuned with EFI LIVE with the transmission tune also. I am getting ready to install a deep pan and was considering the this VB. I have read that with a transmission with this many miles.. the new VB can cause issues with clutch paks wearing faster and other issues with the higher line pressures...your thoughts?
I have a 2013 2500 with 150k miles on it. All stock not even an exhaust. Truck shifts good still. Would adding this on now cause any issues being that its higher mileage?
None, but will give you another piece to the puzzle that you can grow into.
With the new deeper pan will the pickup on the filter be long enough?
Depends on the pan. With a revmax pan, its made to work with stock filter.
If I’m running a mini max with delete and I’m running the trans tune they offered. I should leave that pressure plug/bolt removed? Is that correct? Than you
I have a 2022 with 195k miles on will this upgrade affect anything being so high mileage? It shifts fine, if i were to do it would be just preventing upgrade. Any thoughts? Thanks!!!
Mileage wont be a deciding factor on it, however this corrects a design flaw in these transmissions. I think with your truck being such high mileage for its age, its probably had a lot of highway miles with a minimal number of shifts. We have seen highway mile trucks survive very well with the 68’s and nothing done to them. This VB would carry you even farther without flaw.
yes all 90% I would say towing highway miles. Would you still recommend getting a VB? Also adding a bigger pan like the revmax one for example and having to add more fluid at that point, wouldn’t the pressure inside the transmission cause to raise ? Or it dose not affect anything having more fluid flowing to components . Thanks for the reply !!!! Enjoying your guys videos
You're welcome!
Can I use this same Valve Body for my 2015 Ram 2500 6.4L Hemi??? Or is it only for the Cummins?
This VB is only for the Cummins.
Need help. Installed a RevMax valve body and new solenoid. Shifting fork is on the cable arm. Turned on the ignition and the "P" is flashing, not in park. Torn it all down reinstalled everything again. Same issue. No clue what's going on, any ideas?
Frustrating but if you reinstall the old solenoid and VB does it go away?
@@thoroughbreddiesel no sir. Finally got a hold of RevMax. They said it should start even though it's not showing in park. If it starts do the quick learn and it should go away.
I have a 2013 3500 6.7 with a 68rfe… 89,000 miles got the dreaded p0868 … look in fluid is low….. no issues up to this point with the trans…. I got do a complete fluid change and filter…. Get it hot run it up the road after filling the fluid and the fluid is like disappeared…. Is this a valve body problem typically or something worse. …. All my CVI are in normal ranges
I don’t think you have a proper fill level.
Where would you recommend buying the easy link you mentioned?
www.thoroughbreddiesel.com
Imagine doing this laying on your back on the ground
If you are running tunes and a delete do you leave the plug out?
Yes, remove the plug if you are tuned.
Is this installation process the same for ‘07.5-2012/2018?
Yes a couple of differences (wiring) but all in all the same.
could you link the pick set you use? or just snap a pic? thanks!
To get the filter seal out, those were actually radiator hose pics from Snap-on.
If you don't have ezlynk and dont want to spend 800 bucks just to do a relearn, is there another way?
Find someone or a shop with a Snap-on or similar scan tool. Even having a shop use its scan tool should be cheaper than buying a unit.
OBD Mx+ for your tool and
Alpha OBD for android
Or
OBD JScan for iOS.
I purchased a $29 license from OBD JScan that was linked to my Vin number for best results
Does a 2008 ram 2500 Need to have a quick learn done? Or is it only on newer trucks?
Yes, anything with 68RFE.
What is the best brand of trans fluid to use for the refill?
As a general rule, we refill with whatever the manual calls for. For the 68RFE it requires ATF +4
Do you need this if you have the Aisin trans?
This valve body does not work with the Aisin.
Do I need to change the pan when I install the RevMax valve body?
I believe you don’t have to but most do for the more oil and better cooling.
What if my truck is tuned but my trans isn’t. How will I do a trans relearn if I don’t have a screen. A man tuned mine from his computer
You will have to take it to someone and have them do the forced relearn if you do this VB. The VB doesn’t require tuning as we showed.
Do I need to buy and adapter for the big filter
No adapter needed here.
So we can add an external transmission temp sensor??? Like what banks or ats has????
Yes, the pan has bungs for a additional sensor.
@@thoroughbreddiesel thanks I have the idash already didn’t want to go with different tech that is not compatible.
Just got my valve body , solenoid Pack , filters , deep trans pan today.
Great video
What trans fluid is best
Great video thanks for the help with the phone sale very helpful.
Thanks!
Great Vid.
Why didnt you change the spin on filter?
We did.
will that work in a 66rfe ?
68 only.
Are these valve bodies available for older model second gen dodges?
Not at this time
How is it to add this and keeping it stock without a tune ?
That’s what we did and it was great. We assumed we’d probably need to tune to feel a big difference but we were very impressed as it sits in stock form.
@@thoroughbreddiesel did you install the optional 5x5m hex screw to keep line pressure at 160psi I have the 301A revmax valve body and don’t know if I should install that hex screw if I am running pedal monster
@@mikeyncali 25:45
Will this fix my po871 code
This VB is to correct and enhance driving experience of the 68RFE. Don’t rely on it to correct underlying issues with the trans.
@@thoroughbreddiesel can I just buy the HD valve body is I only use my truck for work .im not sure if I need the zero flex valve body if I’m not doing any high performance upgrades on my truck
Thanks!
You're welcome.
Who in the western New York area is trusted with this job?
It was simple enough for me I did it in my driveway.. I'd offer to help but I am in Texas.. just take your time and don't rush anything, and keep track of your hardware. Also remember everything is torqued in inch-pounds
I went to change my vb and the engine light turned on and it won’t let me get get into drive and I tried doing the quick learn it keeped saying something went wrong
Truck is sensing something wrong. What is the code? Go back through your install.
@@thoroughbreddiesel
I went through everything and it worked fine idk wat I did wrong loo
Great video
Thanks!
@@thoroughbreddiesel 99% sue I’m gonna order one of these next week. My 15 ram 3500 with 160k miles still works great but has had that 3/4 or 4/5 flare feel since new. I’m gonna do this valve body to try and keep it going better a few years
Why not put a drain valve in it as I have done
Saves a mess