Fantastic video, about to fit the same to my GP, this will make it so much easier to fit. I didn’t know about the need for the Dremel, thanks for the info.
THAT'S THE MOST IV EVER SEEN YOU DO RUSS WELL DONE LAD , LIFE IN THE OLD DOG YET 😂, GREAT VIDEO 📹 PAL , MAKES ME WANT TO BUY ONE 😊 KEEP UP THE GOOD WORK SIR 👍🏻😎
I had to dremmel the case to allow for the taller plunger. If it sits even 1mm above the cup it will drag on the clutch. A few hours of fun finding that out 😅
I fitted one of these to an lth clutch with MB springs and it’s awful, really stiff. You can only pull it in on its easiest position. It was worse with the original LTH springs. Will try the dremel trick next, as AF weren’t advising to do that when I first got this, although the plunger fitted very easily on mine.
Nice Russ, I was thinking of one of these when my AF 6-plate cassette clutch went in my Series 2 RB20 but so far it's actually not too bad at the moment. Certainly a consideration if things get too stiff (ooooerrr missus) in the future 👍
Great video. Helpful info. I really love A.F. products but I went with a chiselspeed version because i had to replace my old li style case side. Chiselspeed sell two versions of the kit with a choice of case side. One for gp style kickstart ramp and one for li, tv, sx
Nice! Did you have a problem with splines cut into the clutch arm hole not matching the splines on the shaft? I have the exact same kit and the two are nowhere near a match (the small cog that drives the plunger fits perfectly though). I have fettled them a little with a triangular file hoping that it was just a few "burrs" that needed cleaning off the splines but no luck.
I've got a 150lis with an Rt195 kit. Clutch is a 5plate readspeed with mb springs..... How can I fit this???? I know I need a gp side case....but do I need a cassette clutch??
Yes it's a good bit of kit ran it in my gp 2 years before they copied it lol been running in my scooter for 5 years no problemsth-cam.com/video/MADP_GVWtYw/w-d-xo.html heres a link mate to see how i did itth-cam.com/video/XLjP0AXPXUk/w-d-xo.html
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
Bloody can’t believe Dom has let you operate tools unsupervised, look excellent bit of kit 😊
I know 😂😂
😂😂😂
Another nice feature is the flats on the arm, you can fit a spanner on it easily compared to the round end on the standard arm.
Yes good point, I had to use it! Shame I never mentioned it in the video lol 😂
Fantastic video, about to fit the same to my GP, this will make it so much easier to fit. I didn’t know about the need for the Dremel, thanks for the info.
It only needs a tiny amount doing with the Dremel, so go slow
THAT'S THE MOST IV EVER SEEN YOU DO RUSS WELL DONE LAD , LIFE IN THE OLD DOG YET 😂, GREAT VIDEO 📹 PAL , MAKES ME WANT TO BUY ONE 😊 KEEP UP THE GOOD WORK SIR 👍🏻😎
😂😂😂 lol
😂😂 he likes to keep his capabilities quiet
Sheesh. All this fancy technology… Back in my day, it was teflon(?) lined cables, and nightly sessions on the internet.
We don’t want to know about your internet exploits 😂😂😂😂
😂😂
@@Shedtune_Russ 😲😇😆
great vid very helpfull
Cheers 🍻
I had to dremmel the case to allow for the taller plunger. If it sits even 1mm above the cup it will drag on the clutch. A few hours of fun finding that out 😅
lol, yeh I know. Luckily JG told me before I went to fit mine
Wow Russ you can do more than make tea . And we all know that Dom will take it apart just to make sure you’ve done it up to shedtune standards 👍
😂😂😂
😂fpmsl
Enjoyed the posh hotel lift music russ 😂
😂😂😂 it was just for you
😂😂 I wasn’t as polite
I fitted one of these to an lth clutch with MB springs and it’s awful, really stiff. You can only pull it in on its easiest position. It was worse with the original LTH springs. Will try the dremel trick next, as AF weren’t advising to do that when I first got this, although the plunger fitted very easily on mine.
It’s definitely made a massive difference to my 95million spring LTH clutch. I may be able to ride mine now lol 😂
Nice Russ, I was thinking of one of these when my AF 6-plate cassette clutch went in my Series 2 RB20 but so far it's actually not too bad at the moment. Certainly a consideration if things get too stiff (ooooerrr missus) in the future 👍
Lol 😂
Great video. Helpful info. I really love A.F. products but I went with a chiselspeed version because i had to replace my old li style case side. Chiselspeed sell two versions of the kit with a choice of case side. One for gp style kickstart ramp and one for li, tv, sx
Cheers 🍻
Seen the chiselspeed ones, very nice bit of kit…
Just fitted one on mine,Well worth doing✌
I’m really impressed with it
Really interested in fitting this as I have the AF cassette clutch so should fit straight on it
I couldn’t believe how good it was
Yes
Nice! Did you have a problem with splines cut into the clutch arm hole not matching the splines on the shaft? I have the exact same kit and the two are nowhere near a match (the small cog that drives the plunger fits perfectly though). I have fettled them a little with a triangular file hoping that it was just a few "burrs" that needed cleaning off the splines but no luck.
No I have fitted a few now and not had that problem…. Yet lol 😂
Ok thanks, silly me expecting to fit a part to my Lambretta without any fettling!!! @@Shedtune_Russ
@@robertmee478 😂😂😂
Shame it's only for a G.P casing. I have a Spanish casing on my TS1 and looking at changing my clutch, the A.F kit would really help.
give AF a call as they may do another type
Why didn’t you fettle the new geared bronze plunger Russ? Then if needed casing can Go bk to a standard setup 👍
I did, just didn’t show it 😉👍
I had one of these and buggered up my side case dremelling a bit too much out. Much easier to fit the easy pull exterior one, and it's cheaper
@@neuralyser each to there own
I've got a 150lis with an Rt195 kit.
Clutch is a 5plate readspeed with mb springs.....
How can I fit this????
I know I need a gp side case....but do I need a cassette clutch??
Sound levels are somewhat off too 😜
Thats the new AI for ya... I'll do it myself next time
😂
You boys doing the iow 🤔
Yes
Yep
Shouldn't the arm be at 90 degrees?
It was once it adjusted correctly
Can't you fit a servo?
Lol 😂
@@Shedtune_Russ 😀
Merci pour cette vidéo,pouvez vous me dire ou peut on acheter ce kit? Je suis en France .thank you
www.afrayspeed.co.uk/pages/catalogue?search=Easy+
They are a copy of the vespa pkxl clutch system and the mrp vespa clutch arm ,
Nice 👍
Where's Don 😊
Busy
Don is nowhere🙄 Christ it’s like being in Starbucks….
Yes it's a good bit of kit ran it in my gp 2 years before they copied it lol been running in my scooter for 5 years no problemsth-cam.com/video/MADP_GVWtYw/w-d-xo.html heres a link mate to see how i did itth-cam.com/video/XLjP0AXPXUk/w-d-xo.html
Will make a massive difference to anyone who has wrist issues
where all getting old mate @@Shedtune_Russ