This is awesome. I been thinking about getting a longboard and converting it for my son but after seeing this ima take my time and have my son build it with me
amazing diy skills seem elevated into super hero status once proven, I hope these become available as add-ons in sports and outdoor shops, its too much hassle to enjoy offroad electric skateboarding which seems the free-est without getting into the thousands of $$$ for battery and hub motor tech that all comes from the same factory that has the lion share of manufacturing planned out in stages beforehand.
@@homemade_madness I don't even know what hoverboard means anymore so I'm just going to call it the real deal of whatever the hoverboard is supposed to be lol
Hey mate, did you use chaindrive or belt drive for the transmission? Also what kind of sprocket ratio? This is great and has inspired me to make my own as I have a spare 50cc 4-stroke engine lying about and wondered if 2.1hp will do the trick or will I have to go with two stroke? Thanks!
Do you know where I could find the engine that you used in this video, I’ve been looking for a replacement engine for my pocket bike and I just can’t seem to find the exact same model anywhere.
its not that compicated. the wheel hub is made of steel, so i just made a square plate with a big hole for the shaft in the middle, and welded that plate to the wheel, next i drilled holes in the plate to mount the sprocket. its not 100% in the centre but good enough for sure ;)
Hey thanks!! I bought the wood in my local building supply store. Its 3mm thick ( total board 5 layers=18mm) baltic berch plywood. If you try to bend them into the mold directly they will break (to sharp of a curve) so i put the plates in warm water in my bathtub and let them soak for a day so they got soft then i directly put them in the mold for a few days and they will hold their shapes. After they dried for some days i glued it together. You can see the plate im glueing in the video already has a bit of the curve in it caused by the water softening. Good luck building yours if you are planning on it :)
@@homemade_madness I have already made several longboards. The problem is that they are made with three plywood planks of 5mm thick unit and the result is that they are extremely heavy and not at all supple is your Montaine board flexible?
@@homemade_madness I think that normally for street skateboard we put 7 layer of glulam. The fourth layer is not in the same direction as the others, the wood fibers are perpendicular.
id like to know what the smallest most portable form factor for a vehicle capable of driving over grass would be. it would be cool if this board could fold in half or telescope to shorten my college has a massive parking lot and i would like to get to class in style. and put the vehicle in a breifcase when im done with it
My guess would be folding scooter with bigger tires say from wheelbarrow and power source that works for you. If you bring it inside then electric might be better since no flammable liquid around but if outside then small gasoline engine say trimmer engine with suitable sprocket ratio.
I know this is an older build but if you could remember where and what kind of springs those are that would be great. I’m trying to build a board if my own and can’t find springs
Hi, the springs come frome a clothes washing machine suspension system. and were then stretched out to transform them from tensile to compression springs
Heyy thanks!! i have a crazy big awamesome project coming, working on it now!!😃 the tires were about 10$ a piece, the wood about 20$ together, i bought the engine second hand for 30$ (same engine i used in the motorized beercrate) some steel, paint, glue. So around a 100 bucks.
Fkn awsome guy, but please, please stab whatever drive or device that music is stored on Place it on a rocket and launch directly at the sun. Then come back and make something else of course
![ค้าง (STILL) - GEMINI [ OFFICIAL MV ]](http://i.ytimg.com/vi/Ftxx3hk5vkU/mqdefault.jpg)
What a great build man! I was so impressed when I saw you making your own trucks and even the deck itself!
Gabriel Curtis thanks man!! These kind of comments make all the effort of filming and editing worth while :)
@@homemade_madness please messege me asa you read this
This is awesome. I been thinking about getting a longboard and converting it for my son but after seeing this ima take my time and have my son build it with me
This man has made the ultimate mode of transportation
amazing diy skills seem elevated into super hero status once proven, I hope these become available as add-ons in sports and outdoor shops, its too much hassle to enjoy offroad electric skateboarding which seems the free-est without getting into the thousands of $$$ for battery and hub motor tech that all comes from the same factory that has the lion share of manufacturing planned out in stages beforehand.
Put feet straps from snowboard and try drifting it for cornering. ;)
Haha good idea
Thanks for this ! It was a great help with my design.
Such a great talent my man.... Keep up the good stuff and stay out of trouble!!! 👍👍
Thanks! New project coming today😁
Now this is a real hoverboard
You sure?😅
@@homemade_madness I don't even know what hoverboard means anymore so I'm just going to call it the real deal of whatever the hoverboard is supposed to be lol
It better than the chinese version anyways
Love that, even the deck. Everything homemade! Want to assume the exhaust too?
Hey mate, did you use chaindrive or belt drive for the transmission? Also what kind of sprocket ratio? This is great and has inspired me to make my own as I have a spare 50cc 4-stroke engine lying about and wondered if 2.1hp will do the trick or will I have to go with two stroke? Thanks!
Highly impressive!!
Jawohl! Ich liebe das! Danke!
Danke sie auch! (My best german sorry😂)
At 5:00 we see that it is a chain drive on the left rear. I would like to see the sprocket setup on the drive wheel.
*BEUN TV* Excellent project!
Thanks!! ;)
I would like to know how yu did the rear axle with the spocket.
And also hod did you put that brake on there?
This is just fantastic
Awesome build good job could you possibly tell me where you got those wheels from and the sprocket I have everything else.
Do you know where I could find the engine that you used in this video, I’ve been looking for a replacement engine for my pocket bike and I just can’t seem to find the exact same model anywhere.
Depends on where you live in holland i can buy them online. The one i have came from a mini chopper style pocket bike, they are quite common here.
I do . Amazon
Washing machines, but they are electric tho
could you show(in another video) the engine to wheel sprocket build/hook up ?
its not that compicated. the wheel hub is made of steel, so i just made a square plate with a big hole for the shaft in the middle, and welded that plate to the wheel, next i drilled holes in the plate to mount the sprocket. its not 100% in the centre but good enough for sure ;)
I have a video that i just uploaded that might help if you want to check it out
Cool...but you don’t show how you mounted the chain..is there a break?
Lekker bezig Jornt!
Tuur Egbers 😁😁
Mondo gecko would be so proud 🥲
Hey man!!!! What a great building i am so impressed!! What kind of engine its that??? And what about the controller in your hands??? Thanks a lot!!!!
Your video is superb, I would have liked to know what wood you use for your board and where do you find it?
Hey thanks!! I bought the wood in my local building supply store. Its 3mm thick ( total board 5 layers=18mm) baltic berch plywood. If you try to bend them into the mold directly they will break (to sharp of a curve) so i put the plates in warm water in my bathtub and let them soak for a day so they got soft then i directly put them in the mold for a few days and they will hold their shapes. After they dried for some days i glued it together. You can see the plate im glueing in the video already has a bit of the curve in it caused by the water softening. Good luck building yours if you are planning on it :)
@@homemade_madness I have already made several longboards. The problem is that they are made with three plywood planks of 5mm thick unit and the result is that they are extremely heavy and not at all supple is your Montaine board flexible?
@@eliotberthe5519 yes, its flexible. But its pretty thick too
@@homemade_madness I think that normally for street skateboard we put 7 layer of glulam. The fourth layer is not in the same direction as the others, the wood fibers are perpendicular.
Como hisiste el freno??
Matriaaltje👌
id like to know what the smallest most portable form factor for a vehicle capable of driving over grass would be.
it would be cool if this board could fold in half or telescope to shorten
my college has a massive parking lot and i would like to get to class in style. and put the vehicle in a breifcase when im done with it
My guess would be folding scooter with bigger tires say from wheelbarrow and power source that works for you. If you bring it inside then electric might be better since no flammable liquid around but if outside then small gasoline engine say trimmer engine with suitable sprocket ratio.
Freakin awesome.
How did you connect the driveline? How engine is transmitting power to the wheels? Saw your video and it’s awesome so decided to make on 🔥
Hi, it is chain driven, there is a sprocket mounted to one rear wheel. Good luck with your build :)
How much did it cost to make
I know this is an older build but if you could remember where and what kind of springs those are that would be great. I’m trying to build a board if my own and can’t find springs
Hi, the springs come frome a clothes washing machine suspension system. and were then stretched out to transform them from tensile to compression springs
HI again, HOMEMADE MADNESS, how did you stretch them enough to keep them there?
Like it... But no brakes...??? 😅😅
thanks! yes there are brakes, they work pretty good. check the very last scene ;)
hi, where do you get that wheel? :)
Its just a 10inch handtruck wheel, off the internet
Ik zou dit graag voor een school project willen maken zou je de afmetingen en plannen kunnen op sturen? Alvast bedankt
?
@@jeson2597 aah super vet!! Ik heb niet echt bouwplannen maar kan je wel wat afmetingen en detailfotos sturen als je dat zou willen?
Ja man graag het dat zou heel veel helpen 👍🏽
Zou je ook een foto kunnen op stuuren van hoe de tand wiel gemonteerd is
@@jeson2597 oke heb je een e mail adres o.i.d?
Just subbed with the bell on too
By the way how much was the total build
Heyy thanks!! i have a crazy big awamesome project coming, working on it now!!😃 the tires were about 10$ a piece, the wood about 20$ together, i bought the engine second hand for 30$ (same engine i used in the motorized beercrate) some steel, paint, glue. So around a 100 bucks.
BEUN TV OMG that's so cheap. Btw I'm gonna stay tuned for the new build
BEUN TV where can I get an engine though?
Nice! If you want a sneak peak, check out my instagram @beunhok. These engines are commonly found on minibikes/pocketbikes, pretty cheap.
BEUN TV OMG that go-cart is sick
Did you use chain or belt? I would like to see that please
Chain drive, big sprocket welded to the wheel
quick... what movie is the "oh my God" in the song from?!?!
Uhh, fastnfurious?😁 im not really into movies
Was really hoping you'd manage to power both wheels.
Weer super vet gemaakt
what type of brake system did u use?
Drum brake, only one wheel
How's your head bro? Heard you got hurt at school at the wind energy minor
I fixed it :p
How's your head bro
BeunBAAS mooi werk man!!
haha thanks!
I thought about making one and searches for a video like this! Is this legal?
anything is legal as long as you're not caught!
What drive system did you use ?
Minibike chain
@@homemade_madness how did you mount the sprocket to the wheel ?
bacano
Any idea of the horsepower? thanks.
Probably around 5
@@homemade_madness WOW!!! That's a lot of hp!!! & very dangerous to ride on; no wonder they are NOT in the market!!!
#HOMEMADEMADNESS how much for you to make all the welded metal I need for mine??I have the motor and board already.
Not possible im sorry
How many cc is that engine?
50
Beunhaas
Man this is such a cool project do you mind if i make something similar on my channel? (I'll give you a shoutout obviously)
Thanks, please do go ahead! Thats why i make videos, to inspire people. Ill keep an eye out for the result🤙🏻
@@homemade_madness Just uploaded part 1 let me know what you think
do you sell those or can you add a motor on mine
Yeah both you just have to come to the netherlands😉😉
I want to buy it
Is it allowed here in Netherlands?😂
Renatas Stukis nope🤣
You can quietly curt the crappy music which only causes distraction!!! Thanks. K.S.
Can u please sell some of this stuff I would buy some
Fkn awsome guy, but please, please stab whatever drive or device that music is stored on Place it on a rocket and launch directly at the sun. Then come back and make something else of course
This music fuckin rocks.. nooooooot.
It's Impossible to do a simple Ollie on that one
Bruh that tetris music just runied your video. I'd rather listen to machining and woodwork that a pound land disco fair
Next time kill that fucking 1982 music so we can hear the jet engine you installed on that board
thanks for the video was ok your choice of music however omg turn that shit off bra
That is no where near 35 mph 😂
I hate so much the damn music
What is the point of an engine? Just make an electric powered one.
because this is his area of expertise and its one of a kind
what type of springs did you use?
Hi, they are from the suspension system in a washing machine.
I dont know what area your in but Im doing something similar and found some at Ace hardware