building a 49CC motorized skateboard part 2
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- check out go power sports for all your go kart needs
www.gopowerspor...
the parts I used in this video:
5" drive wheel
www.gopowersports.com/5-drive-wheel-please-read-description
4.10-3.50-5 slick tire
www.gopowerspor...
6" gas tank
www.gopowerspor...
mini bike brake disc
www.gopowerspor...
49CC 2-stroke engine
www.amazon.com...
64T T8F sprocket
www.amazon.com...
T8F chain
www.amazon.com...
Music by Epidemic Sound (www.epidemicsou...)
Your one of the most talented if not the most out of all the builders sponsored by go power sports
I think ike from cars and cameras is top imo but rather b is pretty awesome too!
nah, they butcher most things and they have been using alot of prebuilt shit
Skidtire iKe knows what he’s doing, they just have a schedule so they rush it
The brake cable over the top of the board could be called the emergency brake. 😂🤣
I feel like those wheels are too heavy for it. If you do change the wheels you might have to upgrade the exhaust. Thats just what I think bro as me and other people can see you're smart as shit so you got it under control lol good job Bro keep ot up.
we are almost at 100K!!! subs. we can do it we are almost there!!
rather B welding congrats man
now just make it awd with some off road tires and take to a rally cross event, im positive you win by power to weight ratio
rather B welding I’ve been watching the videos since you made that homemade ride on from a push mower with like 600 subscribers congrats man
You should build an off-road goped
@rather b welding hey just bend the dowel that have the brakes
You can stiffen the board by adding a couple of wood or plastic strips running along the bottom of it just like on old school skateboards.
I have one just like this one, 50cc 2 stroke. I've uptaded the suspension with a more stable springs and the acelerator cable with some extra springs that helps closing the carburator with more precision. Also use a better oil in the fuel that doesn't smoke. The brake system is by just one drum. Overall, it has a lightweight desing
Small suggestion: the front brake pads look as though they will eat themselves down quickly, passing over the slots in the disks! you can prevent this, AND get more braking power by making the arms slightly longer so that the brake pads are on the outermost edge of the disk in that narrow strip that would cause them to contact METAL all the way around and not skip across the holes/slots!! Also, you may want to tether the "Handle-Bars" with a small piece of metal cable to a tab on the board so if you pull or fall off the board you arent yanking on the control cables, as the simplest tug will for sure rip the throttle all to crap and mess everything up (brakes too)
Angle the brake rods either forwards or backwards and put the cable in front if the front wheels, or behind them with the cable under the board
Greetings from Finland. Put those brake levers on top of front axle and then you have brake cable under the board.
That little 2 stroke actually has some power
Your traction = my car spinning the tires ! LOL. It barely moves and doesnt need much throttle.
Thank you mucho for posting this video. it helped me realized what my car is acting like. i severely need to gear up.
Great stuff !
I wonder if you’d be able to move the brake arms to more of a horizontal position, facing rearward and under the deck? That would keep them out of the way, and allow them to stay the same length.
2 strokes are supposed to have expansion chambers
Kylee Bates the straight pipe on a two stroke probably kills a lot of power
Kyle King To extract maximum power from a two stroke a tuned exhaust is necessary. In his case he is already spinning the wheel. More power may not be a beneficial. Or maybe it will. I guess we will see.
of course hes going to spin a slick on mud you pleb
that thing couldnmt do a 1 wheel peel with someone standing on it if it had a gun to its head
Need to watch the whole video, he got sent a proper exhaust for that size engine lmao
Honestly... I can't believe GPS didn't snag you up sooner - LOl. I have been following your stuff on OMB forum and TH-cam for years now. Amazing work! don't ever let it feel like a job. Your vision and talents are unique. I wished you lived closer - I could learn a few things. I made a leaner style sidecar for my special-needs child. I ended up scraping it after a year because it didn't have a roll cage - Just in case failure. I was going to do a 2 seater sidecar next - but welder broke - LOl - It would be cool for you to build one.
Build a live axle for it, and a set of knobies on the back. That should give you added traction for off road. Awesome build dude !
Just run a small tube that it runs into across the board. That's how I did the tail lights on my harley. Tacked a metal tube inside my rear finder and ran the wires through it
Dang shoulda had a locked differential still so cool tho!
Son I love your builds. I saw you on in Texas with another you tuber. I think your a better builder then them. I would rather be welding too except I'm too old and in wheelchair now. Can't get around so I need a buggy like you built there four wheels so I can ride around my farm. I can't weld anymore. I would have to buy one I guess. Your awesome dude. Thank you.
This is pretty impressive.
Just rotate the front brake levers so the cable goes UNDER the board behind the front wheels dude! potential problem solved
Robin Snodgrass that’s what I was thinking
Conner Ochs
perfect
Dude if you can turn that into a drift-board that would be EPIC !
Change the brakes so they mount on top of the front axle so the arms are horizontal, not vertical. Great video, great design, you are amazing.
Rotate your brakes from the vertical position you have, to the horizontal position, on top of your axle. Your cross cable will be under the board but behind your front truck. Build a cable guard to protect the cable. Other than that, looks great!
bend the rods 90 degrees and have them go backwards under the deck and you will still get the same leverage but will be underneath
Hey man. I'm doing a project with the same motor and have no idea what size the bottom mounting bolts are. If you could tell me then that would be greatly appreciated
could you angle those brake arms forward so the wire is in front of the board
john adams that would work or to the rear so it's under the board
john adams that would probably work so that the cable isn't under the board at all. If it runs under the board that runs the potential of getting caught on something while you're riding
Speed wobble is the biggest problem you will encounter, i can assure that. Made one myself so i have experience, will be posting a video in a couple of days
Maybe look at welding some tabs on the front truck roughly parallel to the ground, then pivot the brake arms on them, with the cable under the middle section of the board? You could maybe add a stress relief mount on the edge of the board for the cable to keep it out of the wheels haha.
Also idk if you mentioned it, but personally I'd get some Vicious griptape, it's expensive, but it's generally for high speed downhill longboarding.
Please get a long bord and use it that bord ur sing will break
Congrats for the almost 100.000 sub. I really like your buildings and I really enjoy watching your videos in my free time.
I just wanted to point out few things...
1. You had better to put an expansion chamber on the exhaust pipe (just a tiny one, two opposite conical shaped sheets of metal welded together)
2. To start it, put it on the opposite of "open" so the hole that allows air in the carb will be clogged a bit, this way there will be more fuel in the engine and it starts. Once it's running, turn che lever on the carb on "open" and you're ready to roll!!!
run the brake cable across a pulley below the deck , it will still be under constant tension
Just subscribed!!! I love the content man you’re an inspiration to get out there and do my own builds!!!
Bend both brake arms until the cable can be both, below the deck and behind the front Axel.
Looking real great so far mate! Just need more grip on that drive tire :D
Void X RC It would be cool if he could put a live axle on it.
Try adding something to stiffened the board.. and try adding a expansion chamber..
Obviously, test drive it first, but you might want to go with both rear wheels driving. The simplest way would be to do a live axle all the way through the hub between both wheels instead of a fixed axle and bearings in the wheels. Great job though! Can't wait to see the 'first ride' video. Oh... and wear some protective gear...
both back tires need to pull put a little single rotor disc brake for a back on the opposite side of the chain
School Of Hard Knocks same as i tought! Just put a solid axle in the rear with the engine running on the left tire and a bicycle brakerotor on the right and you will have both drive and brakes on both rear wheels
Should have welded the axel to the wheel with drive chain that way the opposite side gets power as well
and about the cable brack , just cut the twist the bar to the front , so simple
Cool build can't wait to see you ride it. I would recommend a helmet knee and elbow pads for protection. LOL
I'd do some stringers on the bottom to stiffen the board but is a great build
Mount a couple of rc servos for the brakes one each side on the axle and a third for the accelerator then just make a custom controller
What about putting brakes horizontal with joining cable under deck? Out of the way and protected?
Your one of the most talented
Why on earth haven't you put the power to both back wheels. That seem really strange to me, especially when you're making sure you have breaking on both sides. How hard would it have been to do it that way.
Im thinking of putting a gy6 150 cc scooter motor onto a 50cc skateboard. Its gonna be pretty fast
Need more weight on back and more aggressive tires. I have a long board that has some really tough off road wheeles ...you probably need go cart ot 50 cc quad tires
Could mount a chain on the back to connect to a hand controller and to hold onto while braking
Just to improve performance maybe put a tire with some tread on the drive tire to increase your grip while in the grass and such, but awesome project :)
you have to make some small juck shaft and put on the right wheel also a sprocket !
Great Job 👍👍
Maybe hydraulic brakes? Or just tilt those brake rods forward some?
I'm surprised it does do well without an expansion chamber
Nice one! Be sure to protect yourself when you are going to test it. :)
Awesome.............this dude got style !
You need to put offroad tires on there for some grip
Do you think putting brakes on front wheel is a good Idea???
just twist the brake levers so they pivot parallel to the board and the break pads point forward and the cable will be under the board.
get some long u-bolits and put them over the brake cable
u could use a band brake on the back n u wouldnt have to worry bout even braking
Thats one heck of a skateboard first impression was F**& dude thats crazy :)
That thing will scare the crap out of you when it hits its powerband.
This is sick
What do you think would happen if you put the brake in the back and only on one tire?
Its a twostroke engine you need an expantion chamber on the exhaust for it to run property
I am suprised that that 2 stroke engine runs without a expansion exhaust
just a car guy probably kills a lot of power without it
just a car guy
I’ve ran a 2 stroke with out an exhaust at all, straight from the block, really loud but a power loss for sure
Ur vids are flippin amazing keep it up!! And ride the skateboard on pavement or on a road please
awesome build
Holy shit that skate board is dope
Good job welder man 😉
Well that is cool. i want one !
Guess i'll have to settle for a 10speed Predator212cc-powered mountain bike. oh well .
Please use protective gear when driving on the road. I build an electric longboard and thought: ehh, a helmet should be enough. Until something got cought up in my toothed belt. The roller blocked and and the board launched me off -.-
Still have a scar on my knee from that.
Yooo what is that green motorcycle looking like thing
Your face when an engine starts 😂.. IT'S ALIVE!!!!
Pls how do you steer the 49cc engine powered skateboard
The reason you are getting so much wheel slip is you are geared too low give it a bigger gear on the engine or a little smaller on the wheel and it will work much better
moves the cable away fron the front wheel as well..
I had an engine just like that one but where I mounted it it broke the cast metal
Conner Ochs same lol i went through 4 of those engines and they all did the same thing 😂😂😪
how long before you rip off the muffler
Needs more traction, maybe some tires with tread?
Really enjoyed the video, what type of welder do you use?
Can you tell me what microphone are you using? Especially outdoors?
Awesome video!
You could just heat up the arms holding the brake cables and bend them forward couldn't you? Good video, looking forward to next one. :)
It’s not a design flaw, it’s a theft deterrent!
Put a metal tube around the brake line
That engine is gonna seize right up if you dont put anexpansion chamber on it
svinong Bull. You don’t know what you are talking about
John Walsh running a 2stroke without an expansion chamber will cause it to seize
svinong Incorrect. Just as an example, if you’ve seen those old gas powered reciprocating saws that butchers used back in the day, they literally had a straight pipe with a screen on the end. No expansion chamber whatsoever. To seize up a 2 stroke, you have to rev the shit out of it when it’s cold like an idiot and it would “cold seize”.
Sack Smacker it depends from engine to engine, the engine in this video will seize without an expansion chamber
svinong My neighbor ran his pocket bike with a straight exhaust and never had a problem. Ran like shit and sounded horrible but it never locked up.
Nah.. not a design flaw. Just a great foot pedal feature in the making ;)
Do a fwd!!!
Turn the brakes side ways so the brakes would be under the board
What’s the controller handle called
You need a 2 stroke exaust
what rims did you use
thing sounds like friggin Evinrude
You you open to selling one ?👀
I am shoure that you can not stick an 212 go power sports exsost on everything
Bend front brakes forwards
I would cut those brake levers off and weld them back on facing forward
The engine is unavailable right now on amazon 😔 was gunna get one and put it in my motorized bike I’m trying to put together.
Try the 80cc Bicycle Motor. In my opinion it´s way better than the Pocket Bike engines. It surely is a bit more pricey, but plenty of accessories are coming with it. Check it out: www.amazon.de/Ambienceo-Zyklus-Fahrrad-Umbausatz-motorisierte/dp/B01EABX3B2/ref=sr_1_19?ie=UTF8&qid=1526231023&sr=8-19&keywords=80cc+motor
Its like an off-road version of the brap board from 3Dmachines
Just bend the brake rods forward.