DIY Filament Dry box #2, Tips & Updates (DE,EN)

Die einfache und günstige Filament Trockenbox zur Aufbewahrung wurde mittlerweile vielfach nachgebaut und hat dabei einige Verbesserungen erhalten. Ein erheblicher Teil enstand aus dem Feedback der Nachbauer.
In diesem Video zeige ich ein paar Verbesserungen und Problemlösungen.
The simple and inexpensive filament dry box for storage has now been copied many times and has received some improvements. A significant part came from feedback from the replicators. In this video I show a few improvements and problem solutions.
Download Stl files: www.printables.com/de/model/6...
Full build Video: • DIY 10€ Filament Dry box

[@werners_corner]

Download Stl files: www.printables.com/de/model/634289-filament-dry-box-cheap-and-simple
Full build Video: th-cam.com/video/McqbQxbGQOM/w-d-xo.html

[@timderks5960]

Hi Werner,
Great design! Took me a while to find the exact same cereal boxes, since most have the integrated handle these days, but I did find them eventually. I do have an idea for your next iteration though: a way to rewind the filament without opening the box. It might be tricky in such a narrow box, but it would be very helpful.

[@werners_corner]

Thank you! Yes for rewinding a bit, you have to open the lid for a short time. I saw a kind of auto rewinder. But this construction is quite complex and will not fit into the box. Other mechanical solution might get the box leaky. In general, I want to keep the box simple. But maybe there is a simple solution to find.

[@TheGathumpus]

You can print the labels in differing colours to denote what it is I.E. PLA pink ABS blue. Or you can print the label with what's in the box to show its colour and exact shade.

[@werners_corner]

Yes of course what you prefer.

[@TheGathumpus]

have you considered fitting a solar powered garden light on/in the top with a small bulb (not an led). when I used to work in shipping we used occasionality have a bird egg that was incubating come through they usually had a small bulb and a battery under the egg to keep it alive. it worth a though, as to whether a small bulb can keep a filament DH box warm enough to keep the humidity down i don't know. if your not getting a lot of sun or solar charging is not enough to keep the bulb lit you can always plug it in. i have seen posts where people use car headlight bulbs to de-solder surface mounted board components. People always try to over-engineer things with heaters that are computer controlled and other stuff. @@werners_corner

[@TheGathumpus]

Not sure if you follow CNC Kitchen but he just posted this about Drying filament: "I Built a Solid-State Dehumidifier Filament Dry Box" Very expensive but great idea@@werners_corner

[@werners_corner]

I don't, but i'll take a look.@@TheGathumpus

[@werners_corner]

@@TheGathumpusI watched it. Interesting solution, but quit expensive and you always have to power it. For hobby printing it seems like shoot sparrows with cannons.