The rifle arrived today and I dialed in the scope just a couple hours ago th-cam.com/users/postUgkxQt2uORDRfFOVSrO4idv4B90ThT6EOnEL . I haven’t shot with a scope in probably 25 years. The X on the left was my target. (the shot almost in the bullseye on the right X was my father in laws first shot after I made adjustments) The two shots circled are my first 2 shots. Then I brought it down - shot once. Then brought it over to the left. From there zeroed it in to dead center. This all was from 25 yards out. Follow instructions carefully when mounting the scope. So far I'm very happy with the purchase.
THANK YOU for using a ‘bland’ caliber, like .308. I appreciate 6.5 and all the new stuff, but I just like my .30-30, .308 and. 30-06 because they work, ammunition is so available AND affordable. I enjoy your calm, intelligent and fair presentations. When you mentioned Bergara, I knew we were in for a treat! Blessings, Grace and Peace 😊
A couple of things I appreciate about this rifle is that the LOP spacer is very well designed. I picked one of these up for my father in 350 Legend because he has some health issues that give him problems with recoil. He’s shorter and I had to take the spacer out. I was pleasantly surprised when I removed the recoil pad that the spacer didn’t just fall free, it’s actually screwed onto the other part of the buttstock. The dual sling studs are nice but kind of unnecessary. The trigger is nice, light and very consistent. Accepting Savage round-back (accutrigger) bases means good availability, however the rear scope mounting area is kind of small so be aware not every kind of mount may fit/work…also it’s a proprietary size so you can’t use Savage picatinny rails, but BPI Outdoors does sell rails directly on their site. The soft touch stock makes it grip well if your hands are wet and/or cold, which is nice. Threaded muzzle is also a plus and it’s standard thread pitch (5/8x24, except 450BM it’s 11/16x24 I believe). I smoothed the bolt out by polishing the bare metal part with some polish, then oiled it…runs smooth…overall a nice rifle for the money.
Yes sir. Thank you!! I am saving up for the CVA cascade chambered in 7 rem mag. I just got married so I gotta pinch the pennies for a bit but I love seeing reviews on guns that are on my purchase list by youtubers that I consider reliable sources.
My cascade in 450 bushmaster is same hole groups at 100 yds with Winchester deer season xp 250grain. Can’t say enough about how much I love this rifle! Trigger, stock, stock texture, etc. U can’t beat it for the price point at sub $1000
i've been shooting one (6.5 prc) for a couple years and just replaced it with a custom build. After load development, I could shoot 0.5 MOA groups fairly reliably and I'm no ace. But I had feeding issues with mine that spoiled opportunities on an elk and a bear, which was why I replaced it. It miss-feeds, bolt gets stuck, and gets misaligned jammed cartridges. It's hard on brass to the point that the ejector would chip off small flakes that would wind up jamming the firing pin. Case heads would show pressure signs with identical loads much faster than other rifles. The 3 lug design is a nice short throw, but way too heavy to operate while staying on target. If you disassemble the bolt I'd suggest rounding off the corner of the cocking seer ramp to shave several lbs off the bolt throw. I've tried cleaning up the feeding issues but never had any luck. Still for the money and it shoots such small groups? Hard to be that hard on them! For anyone who reloads and is shopping for a 6.5 prc, another plus is that the Cascade is a true long action with plenty of COAL clearance, so you loader longer rounds, like the Berger 156gr. Most 6.5 PRCs are short action and force you to risk a compressed load with bigger projectiles.
this is a great review Jason, almost exactly the same things that I have run into. once i found the right load the brass chips stopped happening. I don't understand why i was seeing pressure signs so early. i hated to see ejector marks on the brass. in fact my ejector pin got stuck down cause of the brass jamming in between pin and body. i still love the gun and will continue using the crap out of it. I do love that the 6.5 prc is built on a long action
Would love to see a new CVA Cascade XT review, it came out recently and looks like another good step in the right direction. Wish they would use flush cups by the way.
Which calibers do you have? I’m wanting one, but can’t make my mind up which caliber. Plus I’m having trouble finding too many options actually in stock.
@@i_are_penguin805 Being a lefty sure does limit a person on rifles. Fortunately, I shoot right handed (although I’m left eye dominant). That said, unlike a lot of other manufacturers lately, CVA seems pretty set on adding different configurations to the exact same rifle, rather than making all kinds of different models. I wouldn’t be surprised to see a left-handed option in the future.
Looks all good and fancy, but... I was obsessed to get something in Full stocked wood. And I found it... And the perfect load in .308 as well without having to experiment around. It's a CZ 550 FS in .308 Win, 7,62X51 respectively. The Ammo is a budget priced choice from FIOCCHI consisting of 165grs InterLock SPBT that I had acquired some years earlier for an AR-10 (20inch) Wich I don't own anymore. I am a mediocre rifle shooter who never got a 5inch group under 1,5 moa with said AR or worse, my G3 Duty rifle during my military time in Germany. With this one, right out of the box with self mounted PA 4-14X44 Scope, I was hitting .72 inch and after 4 cicles of 5 rounds I got it down to .48 inch from the start, at a 100 yards indoor range.❤️
Love the detailed reviews . You always give us a honest opinion and when I'm thinking about purchasing a particular rifle I like to see if you have done a review on it because you don't have a dog in the fight. Keep up the great work man !
Man excellent detailed review Thank you for using various ammo and for explaining the 3 shot groups. You made this rifle exciting while showing some of its limitations Great 👍 work I will share this video because of your presentation just beautiful Best wishes always from Las Vegas Craig This video 10 out of 10 stars ✨ ⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️ Bravo 👏🏻😊
Thank you I’ve been wait for you to review this for awhile I have the cva scout takedown in 6.5 creedmoor. And I plan on getting the cascade next in 308. I also have a wolf and hunter slug gun from cva and have gotten great results from them all. I’m definitely a cva guy now
Bought this rifle in 6.5PRC about 6 months ago. Loved the color and feel and it’s been great so far just haven’t been able to shoot it enough. Topped with a Viper HST 4-16.
Never heard of this brand. Went to the store with an open mind and both guys there suggested I look at this since they both owned one. I got one in 308. Ordering a scope today and hopefully will be at the range on Sat. Thanks for the video. Gives me confidence that my impulse buy was not a bad one.
Did you get sent it from CVA or did you independently purchase it? Asking as I often wonder whether sent ones are hand picked and pre tested by the manufacturer so the reviewer gets outstanding results
I bought one in 350 legend when they first came out with the Cascade. I personally love the gun and it shoots flawless. I put a nice scope on it other than that that's all that's done to mine
So I’m in the lower half of Michigan. Below the straight wall cartridge line. I purchased a used CVA scout (.450 bushmaster) with a vortex scope and couldn’t get it to group. I was firm set on moving away from CVA and then upon talking to my local shop about .450’s we landed on this one with a VX-Freedom 3x9 scope and I have to say I am extremely satisfied with it. For the price point this rifle works and is solid. Might have to grab another in a different caliber (that’s how much I like it).
I just looked at one today, I was turned off by the bolt being sticky and was wondering if you oiled it up a bit if it would get better...I am glad you brought up that point. Thank you.
I really like the objectivity of your reviews. One thing that would be a nice add to your reviews would be to give the viewers a dimension (coal) of the cartridge that will fit in the supplied magazine. This is very valuable information to the handloader when making a decision on a factory rifle (Can I seat bullets out to optimize performance and accuracy). Keep up the good work, and keep the great content coming. Thanks for considering this.
Been looking a LOOONG time for a bolt gun in 450BM looked at offerings from Savage Ruger and CVA unfortunately the cost of the Savage and Ruger were so close to the CVA price I stumbled on and I felt the Cascade was definitely a better made rifle especially the stock for another $100 I went with the CVA as I waited until I found a LGS with a Cascade in stock on sale for darn near $160 less than anyone else and trust me when I say I looked 4-5× a week for a long time As I already had a scope base and rings the extra $100 was acceptable but if I had needed to buy a scope I would have bought the Savage 110 Apex. Really looking forward to see if I can get sub moa with my reloads at 100-200 yards. Bought this gun in 450BM to serve as my public land deer rifle as 12ga sabot slug ammo is now $23-$25 for a box of 5 All I needed to buy to reload 450BM was brass a few bullets (as I already shoot Hornady Interlock and FTX .452" bullets out of my inline ML's) and dies as I had a butt load of suitable bullets primers and powders.
Like to add an update. I have a little over 200 rounds of my reloads through my CVA Cascade in 450bm and 25 through the one I bought my son. I used Starline brass (only new unfired brass I could find to buy) Hornady LiL-Gun CCI SMRFLM primers .452" Hornady 245grn Interlocks, Hornady Custom Grade dies and a Lee Factory crimp die didn't bell the case mouth I let the bullet do that for me. The sub-moa accuracy I achieved from both rifles is nothing short of phenomenal and my MV is over 2400fps. Literally didn't fire a single reload out of either rifle that shot over 1" at 100 and all were under 2" at 200. Can not recommend this rifle and cartridge strongly enough.
@@aidand5941 I picked up the cascade in 450bm too. It’s an absolute gem and consistently sub MOA. I recently had it at the local 200yd range and was getting 1.1” 3-shot groups with Hornady black 250 grain rounds.
I've never heard of this brand but I did jump out of the hobby for the last 2-3 years and just coming back now....I've heard of bergara and they're highly regarded from what I understand so this being a solid rifle makes sense
i second this request. Tikka is the go to for a lot and sounds like almost guaranteed quality but you get so much with this cva plus threaded barrell that goes a long way im between the tikka t3x, cva, and mauser m18
When I go back and watch your video from a few years ago where you compare a bunch of rifles with two of your co-conspirators, how would you rate this in that bunch? Is this your new #1 if you had been able to add this to the batch?
Really glad to see this review! I ordered the CVA Cascade SB .300Blackout about 6 weeks ago. I cant wait for it to come in so that I can start playing with it!
jim im between this and tikka t3x in 300 win mag im getting in preparation for an african plains game hunt but also potential elk hunts in the future. which do you recommend?
Thank you for this review it, aided in making my purchase decision which I am thrilled with. I purchased one and a 300 PRC, which is a 1/2 rifle out of the box (no joke) it’s unbelievably accurate and doesn’t kick bad. Like you say crazy value
Random question, you mention the Ruger or the Franchi more and more in the newer videos, is this just out of site out of mind or not feeling the cva anymore?
Based solely on this video (I _know_ ) it appears that the rifle shoots better with heavier bullets although he didn't say what the bullet weight was for the Rem Core-Lokt. Precision Hunter 178gr ELDX and Federal premium 185gr Berger match were both under 1 MOA while the Sig Elite Copper was the only 150gr that approximated 1 MOA.
I’m so happy you finally reviewed this gun! I’ve always been super curious and had no idea it’s Bergara in some ways! I can’t wait to pick one up soon!
even uses the same serial number pattern as bergaras. the only difference is bergara has a better stock and way better action. which is the only flaws to the cva cascade
All three lug bolt guns have a 70 degree bolt lift, and 308 can have amazing accuracy with factory rifles (David Sharp shot a 3 inch group at 1000 yards using 150 gr 308 with a factory Savage rifle, only swapping out the stock and trigger).
Military standards are a "3" shot group. I fully agree with the 3 shot group. Infact, when I'm zeroing a scoped rifle for long range, I will fire "1" shot and wait a minimum of 20 minutes before firing another. - I'm mainly concerned with "1st shot accuracy" of a cold bore.
What you have to ask was the barrel cleaned the right way before test firing and is the barrell broke in I normally shoot 3 boxes cleaning as you go before I see a difference
Nice review. I have a CVA Optima in .45 cal. black powder I shoot deer with black powder season and an Optima 30-06/50 cal. Black Powder /combo. They are adequate but nothing to write home about. The bolt action looks interesting. I am into Savage rifles though. Even though your review on a couple of them were not all that good. I like the Accu-Triggers and the accuracy that I get from them. Not to mention the aftermarket availability of parts. Best part of the review I thought was about the factory ammo. Remington core lock ammunition is what got me into reloading. 4-inch groups at 100 yards are totally unacceptable from any ammo. Nice video glad you explained your 3 shot group evaluation. It makes sense. Bench shooters primarily want at least 5 shots. It really gives a better indicator on flyers. Even when doing a standard deviation to get a real reliable number it requires at least 10 shots. Nice content and very good review.
I understand why your only measuring 3 shot groups , But some rifles might do well with 5 shot groups ? Would be nice to know which ones hold up better to heat stress!! Thanks for the review
I use Remington Corelokt ammo in my CVA cascade chambered in 300 Win Mag. In a 3 round group, I am touching the same hole. Not sure why you were getting such a bad grouping with it.
So it is a Ruger American with a better stock and slightly better magazine at a slightly higher price! Always good to have another choice in the market!
You’ll still get the same recoil because you’d use around the same amount of powder. My guess is that the 7 PRC is going to be a shortened case like the 300 RCM and 6.5 PRC, to take some of the success of a 7 SAUM
If your shooting the same bullets at similar velocities its going to be about the same recoil. No getting around physics. I have a 28 Nosler in a 6 pound rifle and the recoil was stout, but with a break its about 270 level or less.
Pretty sure the 7 PRC is gonna be long/magnum action not short. I’m guessing the 7 PRC vs the 28 Nosler is gonna look like 300 PRC vs 30 Nosler. Pretty dang close
@@masone4589 What Hornady said was that it was going to be based on the 300 PRC, but that could also mean shortening it. All of the cartridges were based on the 375 Ruger, which parented the RCMs and shorter PRCs by proxy. So I'm still saying a shorter 7mm PRC is probably going to happen.
I was going to buy a cva cascade until I held a howa 1500 standard with a hogue stock. it's unbeatable for me, just under $600. less than a .5" barrel with a variety of ammunition. I use the 168gr berger hybrids. it has a threaded barrel. 3-3.5lb HACT trigger. the trigger is 2-stage so not exactly desirable but still a very good trigger. definitely like the howa slightly better than the cva in my opinion.
Pull the trigger assembly out of the Howa and cut the spring by say 20% and you will have a ripper target trigger. That should take you about half an hour to do. I have had, and still have a number of Howas and have yet to find one that does not shoot
Could you provide any recommendations between this CVA Cascade and the Savage 110 Ultralight? I know your review of the Savage 110 ultralight was really good and I'm not sure the Ultralight is available in the 7mm-8. Thanks
CVA was one of my favorites. But I had a brand new cva scout stainless pitted and rusted 1 week after ownership. Customer service was terrible and they did nothing to help fix it.
I'm looking at the b14 ridge after reading Jim's page about best rifles around 850 ish. My only hesitation is finding the differences between the Bergara b14 and the CVA cascade. I could save 200$ and get a lighter gun still with a bergara barrel, quality trigger, and fiber reinforced stock.... can someone tell me the main differences?
@@matthewlaskowski4059 I already had a cva Cascade when I wrote that which shoots awesome but it's only in 6.5cm I ended up not getting either because my local shop had a weatherby mk v on sale that I bought
I want to purchase a 7 rem mag with a 26" barrel because I want the highest velocities possible from the rifle I purchase. The question I have is if I purchased a rifle with a 24" barrel and added a 2" muzzle brake, would my velocities be the same as having a 26" barrel? I am guessing no. The options for purchasing a rifle with a 26 inch barrel are limited. Thanks in advance.
Maybe I missed it, but a great feature that you didn't cover is the Cerakote on the bbl and action. With all the Savage Axis rust problems that you have covered, I would think rustproofing the gun with ceramic would be a top three feature.
What do you think of the CVA versus the Ruger American go wild and even the weatherby vanguard? I'm looking at a weatherby meateater edition but I was REALLY tempted by the CVA and the Ruger for a few hundred bucks less.
How is the Federal Premium open tip match grade Berger bullet as a hunting round? The best grouping for the hunting round as demonstrated was the Hornady Precision Hunter in your evaluation.
would it make sense to assume that these guns would see similar results from the same bullets regardless of caliber? i have the CVA Cascade in 6.5prc, would the federal premium be good for that one too?
Thanks for the review! I think I’m sold! I’ve been looking at the Bergara but knowing these are made in the place and so much for better priced for me I’m digging the camo on that CVA. Also, love that statue of Christ in the background 👍
My cva cascade in 6.5 creedmoor thankfully shoot's really good with Winchester 129 grain power points my brother bought me some Hornady match 147 grain I haven't even tried yet will see what happens with it but I'm really happy with this gun
I just bought one in 300prc and noticed that I can only get 2 rounds in the magazine. Do you know if they make a different magazine that will hold a couple more rounds
3 shot groups are completely adequate for hunting. The only thing you should be shooting more than 3 times is Grizz/Brownie or African dangerous 7. If more than 3 shots are needed for any ungulate than practice more, study animal anatomy more, and use bullets that actually penetrate.
it's not a bad stock. all the guns I've shot the only stock I've noticed had terrible recoil management was Tikka. the cva cascade is slightly on the heavy side so I imagine it'll do fine with 300wm
Was going to buy one last year and realized they do not make it in 30-06 or 270 for whatever reason. It is a nice gun from all the reviews I have seen.
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
cva cascade is my favorite bolt action
What about your 7-9 Ruger Americans?! Is the CVA better?
How much did they pay you to say that?
@@kylehurley5994 I was wondering the same thing!
WhoTee is in the house!
You'll hurt your Rugers feelings bro!!
The rifle arrived today and I dialed in the scope just a couple hours ago th-cam.com/users/postUgkxQt2uORDRfFOVSrO4idv4B90ThT6EOnEL . I haven’t shot with a scope in probably 25 years. The X on the left was my target. (the shot almost in the bullseye on the right X was my father in laws first shot after I made adjustments) The two shots circled are my first 2 shots. Then I brought it down - shot once. Then brought it over to the left. From there zeroed it in to dead center. This all was from 25 yards out. Follow instructions carefully when mounting the scope. So far I'm very happy with the purchase.
THANK YOU for using a ‘bland’ caliber, like .308. I appreciate 6.5 and all the new stuff, but I just like my .30-30, .308 and. 30-06 because they work, ammunition is so available AND affordable. I enjoy your calm, intelligent and fair presentations.
When you mentioned Bergara, I knew we were in for a treat!
Blessings, Grace and Peace 😊
A couple of things I appreciate about this rifle is that the LOP spacer is very well designed. I picked one of these up for my father in 350 Legend because he has some health issues that give him problems with recoil. He’s shorter and I had to take the spacer out. I was pleasantly surprised when I removed the recoil pad that the spacer didn’t just fall free, it’s actually screwed onto the other part of the buttstock. The dual sling studs are nice but kind of unnecessary. The trigger is nice, light and very consistent. Accepting Savage round-back (accutrigger) bases means good availability, however the rear scope mounting area is kind of small so be aware not every kind of mount may fit/work…also it’s a proprietary size so you can’t use Savage picatinny rails, but BPI Outdoors does sell rails directly on their site. The soft touch stock makes it grip well if your hands are wet and/or cold, which is nice. Threaded muzzle is also a plus and it’s standard thread pitch (5/8x24, except 450BM it’s 11/16x24 I believe). I smoothed the bolt out by polishing the bare metal part with some polish, then oiled it…runs smooth…overall a nice rifle for the money.
Yes sir. Thank you!! I am saving up for the CVA cascade chambered in 7 rem mag. I just got married so I gotta pinch the pennies for a bit but I love seeing reviews on guns that are on my purchase list by youtubers that I consider reliable sources.
If youre pinching pennies why did you get married?
@@dawsonevans320 troll lighten up
@@dawsonevans320 If you need an explanation for that, you clearly wouldn’t understand the answer.
@@dawsonevans320 I wish I could have ditched the wife and kept the children
No. She should be buying it for you.
My cascade in 450 bushmaster is same hole groups at 100 yds with Winchester deer season xp 250grain. Can’t say enough about how much I love this rifle! Trigger, stock, stock texture, etc. U can’t beat it for the price point at sub $1000
i've been shooting one (6.5 prc) for a couple years and just replaced it with a custom build. After load development, I could shoot 0.5 MOA groups fairly reliably and I'm no ace. But I had feeding issues with mine that spoiled opportunities on an elk and a bear, which was why I replaced it. It miss-feeds, bolt gets stuck, and gets misaligned jammed cartridges. It's hard on brass to the point that the ejector would chip off small flakes that would wind up jamming the firing pin. Case heads would show pressure signs with identical loads much faster than other rifles. The 3 lug design is a nice short throw, but way too heavy to operate while staying on target. If you disassemble the bolt I'd suggest rounding off the corner of the cocking seer ramp to shave several lbs off the bolt throw. I've tried cleaning up the feeding issues but never had any luck. Still for the money and it shoots such small groups? Hard to be that hard on them! For anyone who reloads and is shopping for a 6.5 prc, another plus is that the Cascade is a true long action with plenty of COAL clearance, so you loader longer rounds, like the Berger 156gr. Most 6.5 PRCs are short action and force you to risk a compressed load with bigger projectiles.
this is a great review Jason, almost exactly the same things that I have run into. once i found the right load the brass chips stopped happening. I don't understand why i was seeing pressure signs so early. i hated to see ejector marks on the brass. in fact my ejector pin got stuck down cause of the brass jamming in between pin and body. i still love the gun and will continue using the crap out of it. I do love that the 6.5 prc is built on a long action
I had the exact same issue with a Ruger American go wild 30-06. Sent back to Ruger 2 times and they replaced everything but the barrel.
So you missed a shot and blame it on a gun feeding issue!? LMAO.
@@CPLBSS88 it's hard to miss a shot when the action jams on you and you gotta clear it before taking the shot. Missed the opportunity, not the shot
@@CPLBSS88 Reading comprehension 0/10, good job.
Would love to see a new CVA Cascade XT review, it came out recently and looks like another good step in the right direction. Wish they would use flush cups by the way.
Love my cascade 243. 2 inch circle at 350 yards with 58 grain hornady. I was impressed.
I really appreciate all your reviews and in depth dives into important hunting subjects. Especially for budget minded folks!
Hands down the best rifle at that price point in my opinion. CVA did a great job designing this rifle. I have two. Both are excellent shooters.
Which calibers do you have? I’m wanting one, but can’t make my mind up which caliber. Plus I’m having trouble finding too many options actually in stock.
@@jamespruitt6718 I have a.308 and a 6.5 Creedmore. Check Sportsman’s Warehouse. They regularly have them in stock in my local store.
they are slick guns id totally by one BUT they don't offer any left handed models which sucks as a lefty
@@i_are_penguin805 Being a lefty sure does limit a person on rifles. Fortunately, I shoot right handed (although I’m left eye dominant). That said, unlike a lot of other manufacturers lately, CVA seems pretty set on adding different configurations to the exact same rifle, rather than making all kinds of different models. I wouldn’t be surprised to see a left-handed option in the future.
@@lancekrystoff9619 Sweet well thanks for the information ill keep an eye out for any left handed configurations.
Looks all good and fancy, but...
I was obsessed to get something in Full stocked wood. And I found it...
And the perfect load in .308 as well without having to experiment around.
It's a CZ 550 FS in .308 Win, 7,62X51 respectively. The Ammo is a budget priced choice from FIOCCHI consisting of 165grs InterLock SPBT that I had acquired some years earlier for an AR-10 (20inch) Wich I don't own anymore.
I am a mediocre rifle shooter who never got a 5inch group under 1,5 moa with said AR or worse, my G3 Duty rifle during my military time in Germany.
With this one, right out of the box with self mounted PA 4-14X44 Scope, I was hitting .72 inch and after 4 cicles of 5 rounds I got it down to .48 inch from the start, at a 100 yards indoor range.❤️
Sounds nice, but I can't find one.
Jim, thank you for reviewing this rifle.
I really enjoy your channel and appreciate your knowledge!
Love the detailed reviews . You always give us a honest opinion and when I'm thinking about purchasing a particular rifle I like to see if you have done a review on it because you don't have a dog in the fight. Keep up the great work man !
Man excellent detailed review
Thank you for using various ammo and for explaining the 3 shot groups.
You made this rifle exciting while showing some of its limitations
Great 👍 work
I will share this video because of your presentation just beautiful
Best wishes always from Las Vegas Craig
This video 10 out of 10 stars ✨
⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️
Bravo 👏🏻😊
I like your calm , no yelling reviews.
CVA is a fantastic company…I run the single shot scout and it has the same barrel and trigger pull…
Thank you I’ve been wait for you to review this for awhile I have the cva scout takedown in 6.5 creedmoor. And I plan on getting the cascade next in 308. I also have a wolf and hunter slug gun from cva and have gotten great results from them all. I’m definitely a cva guy now
Bought this rifle in 6.5PRC about 6 months ago. Loved the color and feel and it’s been great so far just haven’t been able to shoot it enough. Topped with a Viper HST 4-16.
Never heard of this brand. Went to the store with an open mind and both guys there suggested I look at this since they both owned one. I got one in 308. Ordering a scope today and hopefully will be at the range on Sat. Thanks for the video. Gives me confidence that my impulse buy was not a bad one.
I have five cascade rifles 6.5 creedmoor, 6.5 PRC, 308, 7mm mag, and 22-250 and they all shoot sub MOA. Awesome value in a hunting rifle!
What rounds shoot best out of your 22-250? I've been looking at getting one...
@@driverjohns6051 55gr. Nosler Varmagedden behind IMR 4451.
Did you get sent it from CVA or did you independently purchase it? Asking as I often wonder whether sent ones are hand picked and pre tested by the manufacturer so the reviewer gets outstanding results
I bought one in 350 legend when they first came out with the Cascade. I personally love the gun and it shoots flawless. I put a nice scope on it other than that that's all that's done to mine
He buys basically all of his review products
I’d like to see a review on maybe the Browning A-bolt or Winchester model 70 rifles
Your video presentation and the
Info presented is much better than
Some of your early efforts. This
Rifle really deserves a good fair
Review. Thanks.
Literally going to pick mine up today! Glad to see the review came out just in time for me to be even more excited.
So I’m in the lower half of Michigan. Below the straight wall cartridge line.
I purchased a used CVA scout (.450 bushmaster) with a vortex scope and couldn’t get it to group. I was firm set on moving away from CVA and then upon talking to my local shop about .450’s we landed on this one with a VX-Freedom 3x9 scope and I have to say I am extremely satisfied with it. For the price point this rifle works and is solid. Might have to grab another in a different caliber (that’s how much I like it).
If you had to choose between a CVA Cascade and a Bergara Ridge based on performance alone which one would you choose?
I just looked at one today, I was turned off by the bolt being sticky and was wondering if you oiled it up a bit if it would get better...I am glad you brought up that point. Thank you.
I really like the objectivity of your reviews. One thing that would be a nice add to your reviews would be to give the viewers a dimension (coal) of the cartridge that will fit in the supplied magazine. This is very valuable information to the handloader when making a decision on a factory rifle (Can I seat bullets out to optimize performance and accuracy). Keep up the good work, and keep the great content coming. Thanks for considering this.
My 7mm mag is sub 1 inch at 200 yards with remington tipped ammo great budget gun!
We saw the exact same results in our ammo testing videos with the Remington Core-Lokt
The heavier the bullet is always better grouping for me in any 308 chambering I’ve had
Great review
Good looking rifle for sure
Been looking a LOOONG time for a bolt gun in 450BM looked at offerings from Savage Ruger and CVA
unfortunately the cost of the Savage and Ruger were so close to the CVA price I stumbled on and I felt the Cascade was definitely a better made rifle especially the stock for another $100 I went with the CVA as I waited until I found a LGS with a Cascade in stock on sale for darn near $160 less than anyone else and trust me when I say I looked 4-5× a week for a long time
As I already had a scope base and rings the extra $100 was acceptable but if I had needed to buy a scope I would have bought the Savage 110 Apex.
Really looking forward to see if I can get sub moa with my reloads at 100-200 yards.
Bought this gun in 450BM to serve as my public land deer rifle as 12ga sabot slug ammo is now $23-$25 for a box of 5
All I needed to buy to reload 450BM was brass a few bullets (as I already shoot Hornady Interlock and FTX .452" bullets out of my inline ML's) and dies as I had a butt load of suitable bullets primers and powders.
Like to add an update. I have a little over 200 rounds of my reloads through my CVA Cascade in 450bm and 25 through the one I bought my son. I used Starline brass (only new unfired brass I could find to buy) Hornady LiL-Gun CCI SMRFLM primers .452" Hornady 245grn Interlocks, Hornady Custom Grade dies and a Lee Factory crimp die didn't bell the case mouth I let the bullet do that for me.
The sub-moa accuracy I achieved from both rifles is nothing short of phenomenal and my MV is over 2400fps. Literally didn't fire a single reload out of either rifle that shot over 1" at 100 and all were under 2" at 200.
Can not recommend this rifle and cartridge strongly enough.
@@aidand5941 I picked up the cascade in 450bm too. It’s an absolute gem and consistently sub MOA. I recently had it at the local 200yd range and was getting 1.1” 3-shot groups with Hornady black 250 grain rounds.
I've never heard of this brand but I did jump out of the hobby for the last 2-3 years and just coming back now....I've heard of bergara and they're highly regarded from what I understand so this being a solid rifle makes sense
Sir. You saved me a huge headache. By mentioning the trigger set screw. Mine was really loose. Thank you. 😊
can you compare this gun to the Tikka/Bergara/Weatherby? I want to see how it lines up with the 3 best from the $750 competition?
i second this request. Tikka is the go to for a lot and sounds like almost guaranteed quality but you get so much with this cva plus threaded barrell that goes a long way im between the tikka t3x, cva, and mauser m18
So how would you compare this to the Ruger American? Looking to purchase my first firearm and wanting to hopefully get my first deer this year.
When I go back and watch your video from a few years ago where you compare a bunch of rifles with two of your co-conspirators, how would you rate this in that bunch? Is this your new #1 if you had been able to add this to the batch?
Awesome. Been looking for a 7mm rem mag that fits in the new baby budget 🙏🙏
I also have this rifle in 308. I am happy with it. CVA Cascade will probably be my next in 6.5 PRC
Backfire & Honest Outlaw are pretty much my go-to for all things and always watch before I buy. Can you to do the new CVA LRH and VH now???
Really glad to see this review! I ordered the CVA Cascade SB .300Blackout about 6 weeks ago. I cant wait for it to come in so that I can start playing with it!
Where did you order it from? Which website?
jim im between this and tikka t3x in 300 win mag im getting in preparation for an african plains game hunt but also potential elk hunts in the future. which do you recommend?
Thank you for this review it, aided in making my purchase decision which I am thrilled with. I purchased one and a 300 PRC, which is a 1/2 rifle out of the box (no joke) it’s unbelievably accurate and doesn’t kick bad. Like you say crazy value
Yep with skinny barrels multiple three shot groups is the way to go...very nice review...Thanks
Great review, nice to see you trying different ammo to get the best out of it.
Random question, you mention the Ruger or the Franchi more and more in the newer videos, is this just out of site out of mind or not feeling the cva anymore?
So did all of the heavy grains do better or just that one?
Based solely on this video (I _know_ ) it appears that the rifle shoots better with heavier bullets although he didn't say what the bullet weight was for the Rem Core-Lokt.
Precision Hunter 178gr ELDX and Federal premium 185gr Berger match were both under 1 MOA while the Sig Elite Copper was the only 150gr that approximated 1 MOA.
I’m so happy you finally reviewed this gun! I’ve always been super curious and had no idea it’s Bergara in some ways! I can’t wait to pick one up soon!
even uses the same serial number pattern as bergaras. the only difference is bergara has a better stock and way better action. which is the only flaws to the cva cascade
Woooaa, slow down man, your not getting a bergara rifle lol , do more research
All three lug bolt guns have a 70 degree bolt lift, and 308 can have amazing accuracy with factory rifles (David Sharp shot a 3 inch group at 1000 yards using 150 gr 308 with a factory Savage rifle, only swapping out the stock and trigger).
You would think if a inexpensive CVA can w adjustable LOP that the expensive Springfield Waypoint could do the same at $1500
Nice review!
I have one in 450 bushmaster the rifle has really impressed me
What kind of rifling? How is the barrel inside? Rough? Lapped? 4 groove? Cold hammer forged? Button rifled?
I feel heard! I made that exact comment about 3 shoot groups on your review of the Weatherby. Keep it up good work on the review!
Military standards are a "3" shot group. I fully agree with the 3 shot group. Infact, when I'm zeroing a scoped rifle for long range, I will fire "1" shot and wait a minimum of 20 minutes before firing another. - I'm mainly concerned with "1st shot accuracy" of a cold bore.
Actually, the military standard is 10 shots 4 MOA or less. From a barrel fixture.
Where would the Cascade rank in your under $750 gun battle?
What you have to ask was the barrel cleaned the right way before test firing and is the barrell broke in I normally shoot 3 boxes cleaning as you go before I see a difference
Nice review. I have a CVA Optima in .45 cal. black powder I shoot deer with black powder season and an Optima 30-06/50 cal. Black Powder /combo. They are adequate but nothing to write home about. The bolt action looks interesting. I am into Savage rifles though. Even though your review on a couple of them were not all that good. I like the Accu-Triggers and the accuracy that I get from them. Not to mention the aftermarket availability of parts. Best part of the review I thought was about the factory ammo. Remington core lock ammunition is what got me into reloading. 4-inch groups at 100 yards are totally unacceptable from any ammo. Nice video glad you explained your 3 shot group evaluation. It makes sense. Bench shooters primarily want at least 5 shots. It really gives a better indicator on flyers. Even when doing a standard deviation to get a real reliable number it requires at least 10 shots. Nice content and very good review.
I have one in 350L that I got from Wal-Mart and it is fantastic! I giggle a little every time I shoot it.
How does this compare to the Tikka t3x?
I understand why your only measuring 3 shot groups , But some rifles might do well with 5 shot groups ? Would be nice to know which ones hold up better to heat stress!!
Thanks for the review
What would you rather have, the Ruger American or the CVA Cascade.
I use Remington Corelokt ammo in my CVA cascade chambered in 300 Win Mag. In a 3 round group, I am touching the same hole. Not sure why you were getting such a bad grouping with it.
So it is a Ruger American with a better stock and slightly better magazine at a slightly higher price! Always good to have another choice in the market!
Any news on the 7mm PRC?! Man I want to sling a 180gr ELDM at 3000fps in a hunting rifle without 28 nosler level recoil
You’ll still get the same recoil because you’d use around the same amount of powder. My guess is that the 7 PRC is going to be a shortened case like the 300 RCM and 6.5 PRC, to take some of the success of a 7 SAUM
You can do that or close to it with 7 WSM, 7 Sherman max/mega, and possibly even a 7 saum
If your shooting the same bullets at similar velocities its going to be about the same recoil. No getting around physics. I have a 28 Nosler in a 6 pound rifle and the recoil was stout, but with a break its about 270 level or less.
Pretty sure the 7 PRC is gonna be long/magnum action not short. I’m guessing the 7 PRC vs the 28 Nosler is gonna look like 300 PRC vs 30 Nosler. Pretty dang close
@@masone4589 What Hornady said was that it was going to be based on the 300 PRC, but that could also mean shortening it. All of the cartridges were based on the 375 Ruger, which parented the RCMs and shorter PRCs by proxy. So I'm still saying a shorter 7mm PRC is probably going to happen.
Got one last year in 6.5 PRC, great value. Nail driver.
I was going to buy a cva cascade until I held a howa 1500 standard with a hogue stock. it's unbeatable for me, just under $600. less than a .5" barrel with a variety of ammunition. I use the 168gr berger hybrids. it has a threaded barrel. 3-3.5lb HACT trigger. the trigger is 2-stage so not exactly desirable but still a very good trigger. definitely like the howa slightly better than the cva in my opinion.
Pull the trigger assembly out of the Howa and cut the spring by say 20% and you will have a ripper target trigger. That should take you about half an hour to do. I have had, and still have a number of Howas and have yet to find one that does not shoot
What barrel contour did you get ?
Howard are really good value. I had good luck with my tikka
@@csjrogerson2377 0.5" barrel length is too much muzzle blast and loss of velocity. It's also illegal in a rifle.
Could you provide any recommendations between this CVA Cascade and the Savage 110 Ultralight? I know your review of the Savage 110 ultralight was really good and I'm not sure the Ultralight is available in the 7mm-8. Thanks
CVA was one of my favorites. But I had a brand new cva scout stainless pitted and rusted 1 week after ownership. Customer service was terrible and they did nothing to help fix it.
I'm looking at the b14 ridge after reading Jim's page about best rifles around 850 ish. My only hesitation is finding the differences between the Bergara b14 and the CVA cascade. I could save 200$ and get a lighter gun still with a bergara barrel, quality trigger, and fiber reinforced stock.... can someone tell me the main differences?
What did you end up getting and what made you decide? I’m currently in the similar situation between the ridge and cascade xt
@@matthewlaskowski4059 I already had a cva Cascade when I wrote that which shoots awesome but it's only in 6.5cm I ended up not getting either because my local shop had a weatherby mk v on sale that I bought
I want to purchase a 7 rem mag with a 26" barrel because I want the highest velocities possible from the rifle I purchase. The question I have is if I purchased a rifle with a 24" barrel and added a 2" muzzle brake, would my velocities be the same as having a 26" barrel? I am guessing no. The options for purchasing a rifle with a 26 inch barrel are limited. Thanks in advance.
Maybe I missed it, but a great feature that you didn't cover is the Cerakote on the bbl and action. With all the Savage Axis rust problems that you have covered, I would think rustproofing the gun with ceramic would be a top three feature.
What do you think of the CVA versus the Ruger American go wild and even the weatherby vanguard? I'm looking at a weatherby meateater edition but I was REALLY tempted by the CVA and the Ruger for a few hundred bucks less.
Do you find that you typically shoot better groups with the heavier bullets in general?
How is the Federal Premium open tip match grade Berger bullet as a hunting round? The best grouping for the hunting round as demonstrated was the Hornady Precision Hunter in your evaluation.
I'd like to see this compared with the other budget rifles you reviewed previously.
Do you measure your groups from center to center? Because those groups look bigger than a half inch by quite a bit
would it make sense to assume that these guns would see similar results from the same bullets regardless of caliber? i have the CVA Cascade in 6.5prc, would the federal premium be good for that one too?
Thank you for your Time.
Thanks for the review! I think I’m sold! I’ve been looking at the Bergara but knowing these are made in the place and so much for better priced for me I’m digging the camo on that CVA. Also, love that statue of Christ in the background 👍
It also has an extra forward lug for a bipod.
My cva cascade in 6.5 creedmoor thankfully shoot's really good with Winchester 129 grain power points my brother bought me some Hornady match 147 grain I haven't even tried yet will see what happens with it but I'm really happy with this gun
I just bought one in 300prc and noticed that I can only get 2 rounds in the magazine. Do you know if they make a different magazine that will hold a couple more rounds
Keep doing this man. Look forward to your stuff.
3 shot groups are completely adequate for hunting. The only thing you should be shooting more than 3 times is Grizz/Brownie or African dangerous 7. If more than 3 shots are needed for any ungulate than practice more, study animal anatomy more, and use bullets that actually penetrate.
Wait, do you think a 3 shot group is for hunting practice?
Just curious what suppressor would you recommend to put on a Cva cascade in a 22-250
I have 3 of them and they shoot great and I put the threaded barrel to good use.
How does the stock handle recoil. I'm curious because you said the tikka stock didn't handle recoil well. Would it be good for 300wm?
it's not a bad stock. all the guns I've shot the only stock I've noticed had terrible recoil management was Tikka. the cva cascade is slightly on the heavy side so I imagine it'll do fine with 300wm
Very nice indeed. You do really great reviews.
I have three CVA guns. The cascade, Accura, and wolf muzzleloaders. Taken deer with all three. CVA has great guns no matter the money.
Want to mount Burris Fullfield 4.5-14x42mm on the same CVA Cascade Rifle, can you tell me what ring height you are using?
I've had mine for about 8 months and no complaints. been waiting for this review for awhile now awesome to see other opinions on this 👍
Just got one in 243, added a Vortex Diamondback tactical 4-12x40 scope, now to try it out.
Was going to buy one last year and realized they do not make it in 30-06 or 270 for whatever reason. It is a nice gun from all the reviews I have seen.
No 270, no deal... For me anyway
I just bought the 308 Cva and was wondering what scope and rings you would recommend. Looking under $600. Thank you.
Great review, Thanks! Is the trigger pull now at minimum with the adjustment screw removed?
Yes
Shopping for a new .270 for my wife and this seems like a great choice but it’s not chambered in .270, what a bummer
I’m ordering one for my Father’s Day gift in 308. Excited to know ammo that this thing loves. Can’t wait to get setup!
Great review! .308 good choice for review. Thanks
This rifle or a Bergara b-14 ridge?