Before doing a window regulator install, try this! Window alignment and hardware check Acura Integra

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ธ.ค. 2024

ความคิดเห็น • 15

  • @eastcoastken
    @eastcoastken ปีที่แล้ว +1

    My main motto is "when in doubt, send it out"....not really but I've been waiting to use that line haha. Great work bro

  • @kseries20-24only
    @kseries20-24only ปีที่แล้ว +1

    I also sprayed silicone lube on the door lock piece at the back of the door because when you hit the lock switch it wouldn't always lock very well

  • @blue3549
    @blue3549 ปีที่แล้ว +1

    great job in repairing and maintenance of a 90s classic☝

  • @mbrown2724
    @mbrown2724 ปีที่แล้ว +1

    Hopefully this is the case with mine. My window makes the same noise about an inch from closing fully and won’t completely close unless I push it up. Thanks for the vid!

    • @KanjoBrothers
      @KanjoBrothers  ปีที่แล้ว +1

      Make sure to lube everything as well! .ake a huge difference. My window is still working since I made this video

    • @mbrown2724
      @mbrown2724 ปีที่แล้ว

      @@KanjoBrothers unfortunately I ended up having to change the whole regulator out, the old one had sheered teeth 😬 all good now though!

    • @josedelion6971
      @josedelion6971 7 หลายเดือนก่อน

      @@mbrown2724where did you end up getting the replacement regulator?

  • @tegnando2697
    @tegnando2697 ปีที่แล้ว

    Great work sick Teg I have one myself 2000 LS

  • @emmanuelmartinez8902
    @emmanuelmartinez8902 ปีที่แล้ว +1

    Vietnam war and then the window noise 🤣😂🤣😂🤣😂🤣😂

    • @KanjoBrothers
      @KanjoBrothers  ปีที่แล้ว +1

      😂😂 sometimes I think I'm funny

  • @the4thgen_tfl
    @the4thgen_tfl ปีที่แล้ว +1

    Don't be lazy, fix that valve my guy!

    • @KanjoBrothers
      @KanjoBrothers  ปีที่แล้ว +1

      The lady I bought the car from drove it like this for so long that there's bound to be damage to the cylinder and piston. Don't want to waste the time pulling it apart to find out the bottom end is bad and needs machine work. Rather just do a quick B20 swap and then save the B18 for a build. I can bore it over to a 2.0 and slap a vtec head on it. Then build it for a high rpm all motor car or boost if I decide to build a drag car

    • @the4thgen_tfl
      @the4thgen_tfl ปีที่แล้ว

      @@KanjoBrothers ahhh I gotcha. Makes sense. Either way I’m here for it!

  • @sevensixtooozpopping2195
    @sevensixtooozpopping2195 6 หลายเดือนก่อน

    Vietnam war hahaha