@The GM Channel can you post a video of it? I was thinking about getting a plastic k5 79-86 tank.. 25gallon 26"x26"x10" deep But if sectioning 2" out is easier I'd go that route! Just not sure if I'd cut it at the center seam, or what..
@@johnsteenland1292 instagram.com/p/B79VE4uBNXQ/?igshid=MDJmNzVkMjY= Here’s one we did I’ll Try and find more pics, above the seam just use 2” painters tape
With the front narrow control arms does the wheels hit on the inner stock fenders any ? Was interested in these front control arm kit . I have a 4/6 drop on 22x9 wheels and was wondering if u get these kit with the 3 inch narrow controls arms will my wheels run on the stock inner fenders and would I need tubs
Depends on offset and tire size as well, 9”wide on 4/6 should not rub , any bigger the slosh tubs are a good option good fit and give plenty of room 👍🏽
@@jameskrucial appreciate the reply sir … I’m not too sure what my offset is they are Texas edition 22x9s 5x127 books pattern for my 96 c1500 and my tire size in the front are 265/35. I was looking at getting these narrow control arms or the cpp narrow control arms which they are only 1 inch narrow on each side I believe and didn’t know which one would work better . Currently dropped 4 inches in the front with a McGaughys 2 inch drop spindle and the Belltech 3 inch drop coils but it has a 1 inch spacer on the coil and I was wanting to drop it to a 5 but at a 4 I’m hitting the outer fender a bit but only on hard dips at a turn and was looking by at these control arms to see which one was better. Sorry for the long reply
Stance is perfect. Wanting to do this with my 01 Tahoe. Everyone says they ride like shit with more than a 2”-3” due to the torsion bar set up. How can I do a 4”-6” and still have a decent ride?
By chance can you make a bracket to fit mfg disc breaks but so the caliper lands under the frame ? My diff was cut to much and the caliper all hit the frame where it lands with the provided bracket
Looks great. Interested in the rear leaf hangers. I assume they’re drop hangers since you can’t run typical shackles on the two doors. Didn’t see them on stonefabs website. What did they run and how much drop are they?
Love it. How much does something like this cost?
would love that done to my Tahoe
Can we please get new videos!!!! Love this stuff
Really appreciate it ! Working on it , will be a bunch coming soon ! 🙏🏽
Great Job! Welds look great too! What do we do about the giant gas tank, diaper lookin thing hangin down under these things?!
Section 2” out of it and ditch the plastic cover 💪🏽
@The GM Channel can you post a video of it?
I was thinking about getting a plastic k5 79-86 tank.. 25gallon 26"x26"x10" deep
But if sectioning 2" out is easier I'd go that route!
Just not sure if I'd cut it at the center seam, or what..
@@johnsteenland1292 instagram.com/p/B79VE4uBNXQ/?igshid=MDJmNzVkMjY=
Here’s one we did I’ll
Try and find more pics, above the seam just use 2” painters tape
Can't wait to get my hands and a 2d tahoe most def
Im about to buy one 2door obs tahoe '97, how can i remove all the body to Clean chassis rust & paint? thank u in advice! Great job!!
With the front narrow control arms does the wheels hit on the inner stock fenders any ? Was interested in these front control arm kit . I have a 4/6 drop on 22x9 wheels and was wondering if u get these kit with the 3 inch narrow controls arms will my wheels run on the stock inner fenders and would I need tubs
Depends on offset and tire size as well, 9”wide on 4/6 should not rub , any bigger the slosh tubs are a good option good fit and give plenty of room 👍🏽
@@jameskrucial appreciate the reply sir … I’m not too sure what my offset is they are Texas edition 22x9s 5x127 books pattern for my 96 c1500 and my tire size in the front are 265/35. I was looking at getting these narrow control arms or the cpp narrow control arms which they are only 1 inch narrow on each side I believe and didn’t know which one would work better . Currently dropped 4 inches in the front with a McGaughys 2 inch drop spindle and the Belltech 3 inch drop coils but it has a 1 inch spacer on the coil and I was wanting to drop it to a 5 but at a 4 I’m hitting the outer fender a bit but only on hard dips at a turn and was looking by at these control arms to see which one was better. Sorry for the long reply
@@jameskrucial says my offset is a +0mm
Stance is perfect. Wanting to do this with my 01 Tahoe. Everyone says they ride like shit with more than a 2”-3” due to the torsion bar set up. How can I do a 4”-6” and still have a decent ride?
6640 belltech kit..
Stone makes a coilover kit for that year tahoe, be gone with the torsion bars
Do you happen to know what the tire size was on this?
how much is the front end for a 2000 chevy tahoe limited
Wow, the wheels are perfect. what are their dimensions and the dimensions of the tires
So in order to lower mine I have to get all of that done?
No, you can still drop it without having to convert to coilovers
By chance can you make a bracket to fit mfg disc breaks but so the caliper lands under the frame ? My diff was cut to much and the caliper all hit the frame where it lands with the provided bracket
Yes message me on Instagram @James_Krucial
@@jameskrucial I have bro figured your busy I’ll resend it
Nasty Tahoe sitting right
That is exactly how I want my suburban to lay.
Hey bro stance looks bad ass, on this coil over kit did you have to notch the frame for the tie rods?
No sir
Dammm!! Nice ride. Very good job on the work. 👍🏼
Looks great. Interested in the rear leaf hangers. I assume they’re drop hangers since you can’t run typical shackles on the two doors. Didn’t see them on stonefabs website. What did they run and how much drop are they?
Message me on Instagram @James_Krucial
@@jameskrucialyou still helpin out?
Absolutely beautiful bro
Perfect stance
were are you located at ?
Wow, where is your shop located, I would want a qoute on a suspension change for a Tahoe
Fresno, California you can message me on IG James_Krucial
That looks like a fast car
Nailed it bro.
how does she ride?
Looks great! How much you narrow the rear axle?
beautiful truck brooo
BADaSS Tahoe bRother you killed It..!! 👍
Nice job bro 👍👍
SICK .!!
will that work for a 4door obs tahoe bro??
Yessir
@@jameskrucial thanks brooo...I just gotme a tahoe limited an wanna 4/6 drop it.. but hard too find a kit...
@@ninorodriguez1547 @stonefab will get you dialed in bro! No problem
How much did u shorten the rearend
I'm curious as well
OBS.... The only scene with no answers
Looks Awesome 🔥🔥🔥🔥🔥🔥
What brake kit is that
AZ Pro Performance
Is this tahoe 4wd or 2wd
2wd
Perfect.
🔥 🔥
TIGHT!!!!!!!!
U did that
🔥🤩🔥
HAWTT!!!!!
Do you happen to know what the tire size was on this?
Where you guys located??
Fresno California