88-98 OBS Aldan Front Coilover Install
ฝัง
- เผยแพร่เมื่อ 12 เม.ย. 2020
- Goes over the installation and steps of installing the 88-98 C1500 OBS coil over kit from Aldan American. This easy to install coil over conversion can be done with simple hand tools and a few hours in the garage.
azproperformance.com/products... - ยานยนต์และพาหนะ
The lean is for real, thought I was going crazy setting up my truck, it's 7/8" lower on the front left..
Have you guys considered doing a more in detail video of taking off and putting on the Aldan coils and hardware.. thank yiu
I still like the C10 at the end of the driveway
What does the rear have for the drop? I have a 96 2 door, I used crown 6" flip and shocks and it road like CRAP!
Awesome content 👍 what are the wheels and tires specs
would these coilovers work with lowering control arms and stock spindles? say I want to use 3" lowering control arms and want to install these coilovers so I have adjustability from 3" drop (coilovers at 0 drop) down to a 5" drop (coilovers set at 2" drop)?
dang looks good
I need this 🤟🏾🔥🔥🔥🔥🔥🔥💯💯💯
Fantastic, show! São Paulo Brazil. 🤙👏👏🤙
How long does shipping takes I’m about to get this set for my obs
are the coils just for drops or are there any for raising the height. Looking at fitting 33s, but want to raise the front just a tad bit more. From the ground to the wheel well, I have 35" and 36" ( ones side has a dented out fender. Its at about 33.75 to 34 in the rear. Installing 5/1 which originally came stock on this truck. Just curious if you know which product (coilover) will give me that extra 1-2" lift.
Yes, they just offer a drop, no lifting.
Can you swap the dashboard to 2001_2006?
Which damper gives the most supple and compliant ride quality? Alden single adjustable or QA1 single adjustable?
Does it feel like the newer truck?
Does this work or add any benefit to OBS that are either leveled or lifted? Looking to maximize right comfort on a stock Z71 that I may level or lift a bit.
4wd's are torsion, so unfortunately won't be applicable here.
Just ordered a set for my Tahoe
Price wise are they comparable to the QA 1 which Ive always used BTW
Sucks y’all couldn’t do a promotional discount!! I am up in the air between viking and QA1… also CPP has them for $470 right now!
Reference this coil springs brother please i from Colombia but I buy for amazon or eBay help me
Me gustaría saber dónde podría encontrar esa persona que cambió el motor de esa camioneta gris para que pudiera haser lo mismo con la mia
can this be done to a truck with completely stock suspension or would there be more involved?
Yes, it can be done to a stock truck.
What upper control arm would I have to run with my 93 blazer ? It’s not the s10 it’s the full size
Not sure, as they don't make them for the 4wd Blazers / Tahoes.
Do u have drop spindles also or they factory
He said before the install it has two inch drop spindles
what color do you have on the obs
Does anyone know what brake calipers he's using? They appear to be a dual piston, and that's what I'm currently looking for
It's our front big brake kit. Uses Corvette C5 calipers.
azproperformance.com/products/pro-performance-14-front-big-brake-kit-88-98-gm-truck-suv?_pos=1&_sid=0da6c6015&_ss=r
Nice video. How are three coil overs working for you? Would you recommend?
I love them and very happy with the ride. We have done multiple sets on customers trucks too, and have gotten great feedback.
th-cam.com/video/8Gmn0aF6n-o/w-d-xo.html
@@AZProPerformance how comfortable? Which damper gives the most supple ride quality? Alden, qa1, or ridetech?
I currently have 2" drop spindles and 2" drop springs and I can barely drive the truck , it horrible it bottoms out and has cut my tires up . If I added these in place of my drop springs do you think this will help ? And is it possible to add spring risers to these , if I needed to go up a little ?
These coil overs can be adjusted from a 0-2" drop, so no need for a spring spacer.
Thank you for responding to my question . I just ordered them from you guys . I'm excited to install them and hopefully this will correct the problem so I can drive without bottoming out so bad .
Hey I ordered this setup from y'all and it's not like the one's in the video , I only have adjustment collars there aren't any locking collars like in the video , also it didn't come with a spanner wrench so I can adjust them . What do I do ? I can't install them until I have these parts that showed in your video . I'm not trying to complain . I'm just unsure how to get this stuff
I looked on eBay and was able to find the spanner wrench for $ 40 . But it should have been in the kit . And I can't even find the adjustment collars , I don't know what I'm going to do , I just paid $638 . For these things from you guys and can't even install them
I meant to say locking collars , not adjustment
What size wheels
Make more videos plz 🔥🔥🔥🔥🔥
are they factory or drop spindles?
Drop spindles.
Sic blazer
What’s the total drop with the coilover? More than a 2 in drop or 2 on the dot ?
We were able to get 3" of drop from it, and I have daily drove it like that for a while now. All is good!
@@AZProPerformance so In total with the 2 in drop spindle your at about a 5 In drop up front correct
@@anthonysalcido8700 Correct. Technically I am 1.25" lower than I was with a 2" spring, so safe to say I am riding at a 5.25" total drop up front.
@@AZProPerformance awesome got my obs at a 5 in drop 2 in spindles 3 in drop springs but if I keep can keep my obs at a 5” with coilovers instead of the spring I’m all for it thanks should he ordering soon 🙌🏽
Question, I have 5" inch drop, 3 inch coils 2" inch spindles .by using coilovers can I lift the front end to.
I want coilover but have 4x4
I went to the website that kit was 520.00? Not 495.00...
😳😳😳😳
Ok, so it was TWENTY FIVE more dollars!! That's not going to break you is it??🤷♂️🤣🤣🤦♂️
Don't forget the tax..
I’m building a 96 yukon 2door 2wd and want to improve handling… would this be the way to go ?
Yes sir! I love the way it rides and handles.
azproperformance.com/products/aldan-front-coilover-kit-88-98-gm-truck-suv-300132?_pos=7&_sid=af43d28b2&_ss=r
Why do they call that year run OBS???
old body style
1988 to 1998 Chevy Truck = OBS
Clean ass tahoe
I need link Amazon
azproperformance.com/products/aldan-front-coilover-kit-88-98-gm-truck-suv-300132?_pos=1&_sid=2331478b2&_ss=r
Hola soy un mexicano que me gustaría que le hicieran el cambio de motor como el que le puso a esa camioneta gris tengo una igual estoy dispuesto a pagar
El no te va a contestar x q no abla español. Y si vas apagar donde sea hacen eso se llama swap creo es un motor 5.3 ls vortec aquí por barato bale como 5 mil dólares ese trabajo.. si no sabes hacerlo
Just ordered
You get them on?
@@robertthibodeaux4435 yes I did
How’s the ride ?
@@felipec4500 amazing
Is it worth to do ?
Way better handling ?
i wont to go up not lowered lol
No adjstment wrench
Hardware too short
Not the same locking collar (split type)
No marking for the valved ajustment. Just numbers on the dial.
Slightly bummed right now.
Did you buy off Amazon?
Do you have any issues with the wheels hitting the inner upper fender when hitting bumps or potholes?
No sir. The wheels are tucked enough to not have that issue, but not all wheels tuck the same. Check out these React spindles if you need to bring your wheels in, as they dont widen track width like other spindles on the market.
azproperformance.com/products/react-2-modular-drop-spindles-88-98-c1500-8898-001?_pos=28&_sid=ddf6761f1&_ss=r