Looks like you can't do that with swift loop. Best way is to add "edit poly" modifier, select edge which you would like to cut, then use "ring" and "connect" where you can set up amount of loops, etc.
I converted my box into editable poly but when I right click, I dont see swift loop option.. Where else can I find this tool. Many thanks for the great video
i want to make a zigzag line at my rectangle. I pressed on both edges, the upper one and lower one but i dont know what numbers to put for the connect to make it like zigzag
Whenever I click on connect and little box, three options are there showing but when I click on 1 and increase the no. 2,3,4 ...... but line showing only one not not able to increase line/ edge loops. Help me!
Hello. I have an Asus g701 laptop. i7 , Nvidia 1080 GTX, 64gb ram, SSD hard drive. Just standard video configuration. But I do have textures set on 2048 in viewport.
Hello there. You could try a few things. 1. Zoom out from the model while in swiftloop mode. It sometimes acts strangely at certain camera distances. 2. Try swift loop on another, newly created model like a simple cube. 3. The cleaner your geometry the better, so make sure you have all 4 sided polygons and not triangles. Triangles stop edge loops. 4. This isn't usually the case but, You might have broken geometry. I have a video you can follow if that is the case. I will link it. Hope it helps.
@@MZONE3D Well I tried them and the result is still the same, I assume there might be some option or something is turned off, Though It's a new project and I did not touch anything, I also Reset the project but it makes no changes! I'm still researching on it!
Hi. Basically you go to Customize > customize user interface > select quads menu tab > type SW in the left panel to find the Swiftloop command and then drag it over to the quad menu panel on the right and make sure you select the quad you want to add it to. I might do a video on this, but until then... More info on Autodesk knowledge base.... knowledge.autodesk.com/support/3ds-max/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU/3DSMax-Customizing/files/GUID-A1D1C3D4-3E7A-4269-8399-A9E5A9C9FEFF-htm.html
after watching many videos , this was the first one which explain it quickly and understable . big thanks !!!!
What if you want the loop in the middle (hold down shift), but don't want it to make the curve.? (Contor of the shape, only in middle)
Looks like you can't do that with swift loop. Best way is to add "edit poly" modifier, select edge which you would like to cut, then use "ring" and "connect" where you can set up amount of loops, etc.
I converted my box into editable poly but when I right click, I dont see swift loop option.. Where else can I find this tool. Many thanks for the great video
Never mind. I found it under Modeling tools
Please help me from where you find
i want to make a zigzag line at my rectangle. I pressed on both edges, the upper one and lower one but i dont know what numbers to put for the connect to make it like zigzag
How did you make the swift loop option appear on your right click?
th-cam.com/video/8Wuw8wgUUC8/w-d-xo.html
@@prstudio7605 Thanks!
why hold shift at middle the line are not straight ,is anyone have fix?
Whenever I click on connect and little box, three options are there showing but when I click on 1 and increase the no. 2,3,4 ...... but line showing only one not not able to increase line/ edge loops. Help me!
THANK YOU !!!!!!!!!!!!!!!!!!!!!!!!!!
thanks!!!!
Nice video.
Whats your rig and video configuration for 3ds Max?
Hello. I have an Asus g701 laptop. i7 , Nvidia 1080 GTX, 64gb ram, SSD hard drive.
Just standard video configuration.
But I do have textures set on 2048 in viewport.
yes i found it nice command dear thanks for sharing knowledge
i can't fond Swift Loop command in max 2014
th-cam.com/video/8Wuw8wgUUC8/w-d-xo.html
excellent
After Left click and put the Swift Loop on the object 0:58 , I see no lines/edges, What should I do?
Hello there.
You could try a few things.
1. Zoom out from the model while in swiftloop mode. It sometimes acts strangely at certain camera distances.
2. Try swift loop on another, newly created model like a simple cube.
3. The cleaner your geometry the better, so make sure you have all 4 sided polygons and not triangles. Triangles stop edge loops.
4. This isn't usually the case but, You might have broken geometry. I have a video you can follow if that is the case. I will link it.
Hope it helps.
Here's the link to the model cleanup video if all else fails. Best of luck. th-cam.com/video/3PuxYRayJGE/w-d-xo.html
@@MZONE3D Well I tried them and the result is still the same, I assume there might be some option or something is turned off, Though It's a new project and I did not touch anything, I also Reset the project but it makes no changes! I'm still researching on it!
OK so I found the solution! In order to show the edges you have to press F4!
@@saeed4648 Haha, well done! Thanks for sharing that :)
if please could you tell how to put this swift loop tool option on the right click?
Hi. Basically you go to Customize > customize user interface > select quads menu tab > type SW in the left panel to find the Swiftloop command and then drag it over to the quad menu panel on the right and make sure you select the quad you want to add it to.
I might do a video on this, but until then...
More info on Autodesk knowledge base....
knowledge.autodesk.com/support/3ds-max/learn-explore/caas/CloudHelp/cloudhelp/2019/ENU/3DSMax-Customizing/files/GUID-A1D1C3D4-3E7A-4269-8399-A9E5A9C9FEFF-htm.html
th-cam.com/video/8Wuw8wgUUC8/w-d-xo.html
THANKS
u are british right?
what is short cut for this tool adding edges
f1