THE LOUDEST EXHAUST!! - CB1000R BLACK WIDOW FULL INSTALL
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- In this video I install a full BlackWidow exhaust system from www.blackwidowexhausts.co.uk - This system is seriously LOUD!
A full decat video install removing the OEM system from the Honda CB1000R 2019 Model.
Cover your ears for this one!
Thanks for watching, please subscribe and I will see you in the next episode of ShedTorque.
Fancy a sticker for your toolbox? Go on, you know you want to.. Is it even a toolbox without one?
"Hit the nail on the Shed" stickers available here..
www.spreadshir...
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
Great video bud, and so helpful in my decision on both downpipes and end can. PLEASE can you let me know if this is the 200 or 230 version. Assuming the 200.
Thanks buddy I appreciate that. To be honest, I am not sure. But I'll get back to you.
@@ShedTorque46thank you very much buddy, my error though as the 230mm is a slightly different can. In your opinion is it too loud as Im concerned that its 118db where all others I see are circa 105/7
@@ShedTorque46 hey buddy just a further update and further thanks, as you helped me decide to purchase the 200mm can that you installed which is now installed on my bike with OEM exhaust for now. Im totally over the moon, it looks and sounds awesome
@@sijc9277 No problem at all my friend
Yeah sounds great, getting a cb1000r in May going for at least a 21 plate and will be sticking blackwidow on her, had them on most of my bike to be honest and love em.
Nice! Let me know how you get on
WOOOH Holly exhaust buddy! 👏👏👏👏
From Rio de Janeiro 🇧🇷
Nice....you are lucky Guys in UK ...for us in Germany without e-Nr no chance for legal drive
i did not give a rats as about the non e , in norway . run a full race system from black widow on my 96 cat hahaha
Voting has consequences, silly Europeans 😅
Great install. I have the same system albeit I run an Arrow Ti end can.
Super value for money and beautifully made. Be aware the headers will go brown after a few hundred miles though...no biggie though, I kinda like the look?. Consider reversing & spinning those link pipe clips 180 degrees. That way the bolt heads can be hidden to the inside of the system out of sight, and it looks a lot 'cleaner.' Treat yourself to a decent 1/4 socket set...with a set of 1/4 drive allen keys too...will save you hours of faffing! Agree it's crazy loud sans baffle! Mine's had its 1st MOT last week, the tester was pretty relaxed about the exhaust noise. Great bikes....thanks for the vid...enjoy the ride.
Thanks for the comment Tifa, weirdly I kinda like seeing the nut on the clamp, looks almost more mechanical, but I may turn them round. 👍 Yeah I picked up a Bahco set pretty reasonably priced. Thanks for watching and commenting. Appreciate it. 🔧⚙️
luv black widows had one on my mt07 wicked couldn't take the baffle out as way way to loud want one for my sx now
They really are an awesome company and the welding is spot on. I am uploading another black widow installation soon.
Perfect sound and bike but what for this bend around before the muffler when it can go directly? can anybody explain?
I would assume pressure related computational dynamics.
Hi mate how is the exhaust holding up? Any issues also how is the bike running still without a map? Want to get a full system but like some people say, the forum's etc make it out like your engine will blow up if you dont get a map
The manufacturer says no map required, and it isn't. BUT, if you want max power in each range then sure, take it and get it tweeked. Honestly, no issues for me at all. I do ride baffle in on this bike though, the noise gives me a headache after an hour and I am getting old. Thanks for watching! I haven't done much recently but fitted some heated grips last night on a friends bike so will upload that, also fitted a complete exhaust system on a friends bike so just in the middle of editing that! Thanks again!
Dammm! When i be 16 im gonna buy a Yamaha YZF-R125 and the first thing im gonna do its to but that thing on that rn im 14 in agust so 2,5 years im gonna buy that bike and buy that exhaust the fastest i can that sounds so great!
Hey mate do you have a video on your windshield?
Great thorough tutorial buddy. I've been toying with getting a full system on mine. currently have a Termi onto the CAT. Hope giving that kidney to Black Widow was worth all the effort.. Any tips on blagging a system from BW regardless? 🤔😃😂👍
Ha ha. It was. It is an excellent system to be honest. I cant fault it, or their customer service. Well worth it. Hmmm tips.. cut out kidney and post 😂
Just subbed mate will take a look 🔥⚙️🔧
Ideal mate, great welds and bends on that system, was telling you where to put the spacer for that band clamp as I watched you think it through lol. Baffle in for the win bud 😎🤘
Moral of the story is not to drink strong cider whilst making a video 😂 Cheers Rhyd. Appreciate the comments mate. Baffle going back in. ⚙️🔧
Hey man great video. Did you have to do any tuning after the header install???? I was wanting to put a header on my 18 cb1000r. But I would like to know if I have to get it jetted or anything? Or will it run just fine with a new header in it?
Thanks mate. No tuning needed. If you were really fussy, like me, you could take it and iron out a couple of flatter spots at higher revs but you will do well to notice them.
No doubt sick and beautiful sound. Well done.
Cab you please share what is the exact model of Black Widow exhaust system?
Thank you! It's the system to fit the cb1000r off their website. Stainless steel full exhaust system with the blue tip stubby carbon can.
@@ShedTorque46 thank you for reply. Sounds craaaazy. So far my favorite was Arrow exhaust but is even better. Really impressed with both, how it looks and how’s it sound. Well done and thanks again.
No worries at all thanks for the interest in the channel
Mint video mate but looks like the connections if pipes are slightly to loose for my liking should be a tighter fit than that surely. Nice headers
I thought the same, but the fuel line connector is a strange design. It moves a mm or two but is designed to seal. Appreciate the comment mate.
Great video, I've been looking at buying the Black Widow headers and an SC Project end can. Have you had any issues since releasing this video with the Black Widow system? I assumed you would have needed a remap and run on a dyno to bottom out any issues with a full system? I can't find any info regarding the lamda sensor limitations. All forums point to a full remap job but my knowledge on lamda sensors suggests otherwise. Thoughts?
Hi Mike. No need for a remap as the ECU effectively learns from the new set up. However, that isn't to say it would not benefit from one. On full throttle (and I mean full ;-)) you will notice a couple of flat spots, nothing major, but if you are sensitive to it you will feel it at higher revs. Other than that, it is spot on mate.
@@ShedTorque46 thanks for the info mate appreciate it. Keep up the good work
Thanks Mike. Taken a break for a while but I'll definitely be back on it soon!
Hi mate, great video. One question, after a full system don't you need to take to a dyno and reprograme the ecu? isn't she burning more gas or jerking in some rev ranges?
Thanks Gordjy, appreciate that mate. Apparently not, im reliably informed the lamda sensors are on a feedback loop so the ECU can monitor and adjust as required. I havent felt any jerking as of yet. Its something I am going to query with Honda just to confirm. Black Widow say nothing is required.
@@ShedTorque46 OH if so its ilke the triumph's. thats cool. I just bought a black edition and i'm considering options.
Mint. Quickshifter 🔥
Hi mate thanks for information. Plz what is ur end can size?
I'm coming from Twitter, new subscriber!
That's awesome, thanks Ren. Great to have you on board! 🔥🔧⚙️
If Black widow are watching I’ll quite happily do a video of me installing one of your full systems with the 230mm carbon slashed blue and can. And my Honda hornet 750 you all know it’s gonna sound better than the 4 cylinder. So please black widow uk contact your boy in Scotland and I’ll make a belter of a video taking the full exhaust into the hills of the west coast of Scotland. Full send baby
Hi Guys, i have a ZZR 1200 with the stock exhaust. I want to change them with black widow or delkevic.
Anyone already test both exhaust to compare ?
Can you fit the previous end can with the black widow pipes? I think the the other end can would look better?
You would be able to yes. Really? Better than the blue tip?
@@ShedTorque46 ok cool thanks. Both end cans look nice but the previous one is more slim and shorter exposing that beautiful single sided wheel more😍 i have the leo vince end can on mine with stock headers. Looks good but still too quiet lol
Have you tested the other end can with the black widow pipes for sound difference?
I think the blue tip will be a deeper sound due to it being a bigger end can?
Hey mate, great video
Thank you Dave. Nothing on the windshield no.. I'm just getting set up to do some more videos
what is your setup for gopro mic please
On that one, I think the go pro mic is a purple panda, wired to the go pro with the mic extension unit for the go pro 6 black, then up into the helmet. I edit in premiere pro so I can mess about with sound in there. Thanks for watching! I haven't done much recently but fitted some heated grips last night on a friends bike so will upload that, also fitted a complete exhaust system on a friends bike so just in the middle of editing that! Thanks again!
NICE ONE KEITH KEEP NOISE DOWN LOL
😂🔥⚙️🔧
what did you do with your std headers and cat ? im looking for a set
I still have them Ian
Drop me a line shedtorque@gmail.com
Nice But it woud be nice to hear the old sound against the new sound . But the video is cool no worrys .
Cheers Arjan. The old sound wasn't worth recording trust me ha ha. Imagine a large deskfan. Now turn it on. Hear that? Me neither 🤭😂 Thanks for the comment 🔥
Nice
Whats the song about 27 mins
Hi buddy, I will have a look for you!
@@ShedTorque46 thanks
@@baldylocks2916 The Slowdown Michael Shynes
🔊🔊🎶🎶
Thanks Andrew, music to your ears? 🔥
nahh ARROW exhaust more louder that that