วีดีโอ

THANK YOU!!!!! My fz1 is my baby and I was so nervous about tearing into it and this makes it so much simpler

Exactly what I was looking for! Just bought myself a CB1000R 2020 and plan to add a cover on it too. Looks easier than I expected. Thnx pal!

Do you need to tune your bike know that you have changed your OEM exhaust?

Snap-on

I have a ratchet and it uses the guts of a Snap-On

Cool 😎 thanks for this valuable video. I needed to see how in order to tuck in a GPS tracker under my 2019 model. As soon as i bought i got X-pel film installed on thr tank to protect the paint. Costed me $350

250x recommended for a beginner I have an 06

Thank you. Your video helped me 😊

The best video about changing spark plugs. I have CBR1000RR 2007 and changing spark plugs is same horor.

Great video. However, your spark plugs, particularly the second, looks like if it has engine oil on it. I have a very similar situation on two of my cylinders while the other two are completely dry and tidy. First I was thinking of ripping my engine apart to change valve stem seals, or worse look for piston/rings/cylinder issues. However, after seeing a number of Fireblade spark plug change videos with oily spark plugs this seems to be such common issue that I start to wonder if these high reeving engines always will have a certain amount of valve stem seal leak? Have you ever had any performance issues or indicators of oil leak problems?

Que cabr0n, dice que las españolas son peores... vivo en vitoria que es donde se fabrica bahco en españa y te aseguro que los procesos de calidad del pais vasco son bastante exigentes.

5:29.. Spain and France too...

Great video, thanks for uploading! Straight to the point and informative 😄 Gained a new sub today

Thanks for the video. I am about to upgrade as well. Got the 2014 z1000sx. But I would only use the headers in combination with my akrapovic titanium mufflers.

Also add the following - Stress reduction: Riding a motorcycle can help reduce stress, anxiety, and depression. A study found that riding a motorcycle can decrease hormonal biomarkers of stress by 25%. Sense of calm: Riding a motorcycle can provide a sense of calm and relaxation. Focus: Riding requires concentration and focus, which can help take anxiety to the back seat. Immersion in nature: Motorcyclists are more immersed in nature than car drivers, which can lead to reduced stress levels, lower blood pressure, and increased energy levels. Endorphins: Riding a motorcycle can produce endorphins, which can help you feel more relaxed and pleasurable. Freedom and exploration: Riding a motorcycle can provide a sense of freedom and exploration. Outlet for emotional release: Riding a motorcycle can provide an outlet for emotional release. Self-reflection: Riding a motorcycle can create space for self-reflection. So yeah, you're not wrong!! Thanks for the video and, I wish I discovered you sooner.....

There are many companies which produce high-quality products in china. People think that because they are good at producing cheap products for the people who dont want to or can't spend a lot of money on something, that doesn't mean that's all they are good at. I think people would be surprised at the big brand names whose products are made in China.., Ps, I've had bacho stuff for years and still seems really good quality to me.. excellent value for money, and they will stand up to the test of time.. I wiil watch your ten year review of yhat socket set if im still alive 😂😂

I have the S138 set - and the snap locks on the box are the worst quality on mine - when i set the box down on the ground(holding the handle) the snap locks open by themselves - box opens and all parts all over the floor. Is yours acting like that?

Bacho i well known in Norway and i own several tools from the company, recently im looking to get the S530T set.

Good video, but if you want promotion, read my name carefully)

nahh ARROW exhaust more louder that that

Echt mooi uit leg pak altijd zelf stof zuiger voor de gaten

I think many Swedish people have the opinion (and experience) that the Swedish made Bacho tools from 30-40 years ago had the best quality, better than today and on par with the very best tool brands. Primarily adjustable wrenches, pipe wrenches, socket sets and spanners. Then they moved the manufacturing to Spain and Argentina, and the quality and design suffered. Still some very good tools today, but also some low quality tools. Apparently, there were real high quality adjustable wrenches made in Spain since the early 20th century, but the quality of the Bacho wrenches still suffered.

Great video bud, and so helpful in my decision on both downpipes and end can. PLEASE can you let me know if this is the 200 or 230 version. Assuming the 200.

Great video. I need to remove my tank to correct a shockingly poor paint job by Honda . The clear coat on the bike is like my daughters water paints at nursery 🤦

I bought a hjc rainbow mirrored visor for £25 had no certified mark (the standard hjc ones are £50) when it rained during the daytime, it distorted everything might aswell be blind folded. But my stock hjc one didnt distort anything.

I'm not about to risk my face with a cheap visor from China , I doubt they're made to any standard and I'm not saying they are crap but I'd still rather buy the original from visor shop for 30 euro.Also I work in a phone shop and we have these nano gel screen protector sheets (Lensun , made in Japan) I put one across the visor and cut it to size , its hydrophobic and self healing and almost impossible to scratch. I do about 25,000km a year on the bike and I've not replaced my visor now in over 2 years were as before it was every 6 months due to wear and tear.

Are these visors just to save your face from the rain and stop the wind blowing your fake eyelashes off, or do they serve a safety purpose? If so, how does the Alibaba express one fare if a stone kicked up square into it in comparison to the genuine one? 🤔

Thanks! Very helpfull :) what brand and type mirrors are those you have on there? Looking for some solid ones that look cool

I'm surprised that after you saw the first price, your thoughts weren't - It's CNC time, foreigner rate 😂

Fill up your bags whit flr and sgb or even xlm and xrp whe are going too the moon

Very good video. The Swedish brand Bahco also absorbed the best Spanish tool brands (Irazola, Palmera, Acesa and Irimo). Irimo continues to be sold as Bahco's second brand and its catalog, although smaller, has very good quality tools. Both Bahco and Irimo manufacture in different places around the world (Portugal, Spain, Sweden, Argentina, China, Taiwan...). Greetings from Spain

Thats a long time ago welkom back

Brother there is no need to disasemble all this stuff. Just remove the radiator bolts and it is easy to access the plugs.

Whats the song about 27 mins

What is the wrong with this bike?

Excellent video, it reminded me how essential coffee is to any motorcycle maintenance

I followed this video yesterday and it worked out perfect, even without the Perlenbacher👍😂,thanks

I am about to pull the trigger on these for my 2008 ZZR1400 and you are the only one who has a video of this exact exhaust. Did you install, I was really hoping to hear what the sounded like😔

You never did an install video?

If Black widow are watching I’ll quite happily do a video of me installing one of your full systems with the 230mm carbon slashed blue and can. And my Honda hornet 750 you all know it’s gonna sound better than the 4 cylinder. So please black widow uk contact your boy in Scotland and I’ll make a belter of a video taking the full exhaust into the hills of the west coast of Scotland. Full send baby

The spark plug tool in the stock under seat toolkit makes access a lot easier to plug no.1.

I changed the entire exhaust system of my 2011 F-150 using my Bahco S240, S330 and S160 socket sets and they seem to be very good quality. I have used this brand before and they have an excellent reputation. For me, this brand has been with me for about 7 years and not even They show signs of rust or anything similar. very good video and perspective

Hi Guys, i have a ZZR 1200 with the stock exhaust. I want to change them with black widow or delkevic. Anyone already test both exhaust to compare ?

how did you install it in the throttle grip by screwing them in to keep it stable, the throttle grip remains stuck! how did you install it?

Thanks for the help , I usually just throw it at my mechanic.....bearing went and he's on holiday and I was missing part 12 on the diagram (rh spacer) , thanks to this video I know now what it should look like in reality, mine came out with the bearing race welded to it. I think I need a new one lol.

Really useful video, thanks for posting

Yeah sounds great, getting a cb1000r in May going for at least a 21 plate and will be sticking blackwidow on her, had them on most of my bike to be honest and love em.

Hi ive been told by Akrapovic dealer .the headers won t fit my sc project crt silencer its a 2022 model cb1000r

WOOOH Holly exhaust buddy! 👏👏👏👏 From Rio de Janeiro 🇧🇷

I have an old school “ made in Sweden “ Bahco 8” adjustable and a new one . Neither have had the abuse to determine quality difference.