Respect. Hard job. Finished to Completion.. well done. However next time simply extract the splined female portion that goes over this shaft you swapped. Simply cut out both wheels center's and swap the one over to weld it. Easy easy easy. An hour tops
Thank bro we appreciate it! and we had actually thought about doing it that way too but simply didn’t want to go back to the junk yard and get more parts lol either way came out great! 🔥
Badass video man I like your ambition to make things swap. I have 3 of the gmt800 series 2 trucks 04,06 2500hd 02 Tahoe. Did a full Escalade interior swap including full dash and it blows me away how different they are the whole wiring and all switches are different. I’ve been wanting to put a stingray steering wheel and the Tahoe out of one of the new Corvettes so I went and found one of the splines and chopped it off and I’m going to do the same thing like you did. I never messed with the clock spring in the airbag things on the O2. I just pulled the dash cluster and popped the bulb for the airbag lol so the light isn’t on anymore. But I’ve checked through countless forms online and all you see on there is people writing bs. Answering your questions with well I had a buddy that did this or somebody that did that but they don’t have any experience on the subject so it’s like man why are you even commenting wasting my time giving me some dumb information there’s no good or the people they can’t be done no way no how I had one of the admin’s tell me that about putting those seats in and I was like yeah right i’ll figure it out the work because when you flip them over and look at both of them all of the motors and set up are the exact same plugs that go into motor so I got to tear into the wiring on it and is the same just adding more shiz to the 03-06 but I got them to work so if you want it you can figure it out. Thanks again for the video
Yeah man it’s amazing how similar these trucks all are but then again so different. You’re are absolutely right same thing when I was looking for stuff a lot of bs and no direct answers. Yeah bro there’s always a way to get things done whether people say it’s not possible, if there’s a will there’s a way. Anyways, Thanks for tuning in bro, we appreciate it 🤙
Anyone need a airbag 03+ with 1 connector for this swap i have 1 available, also your able to make the steeringwheels controls work from the 03+ on the 01 with aftermaket radio splicing into the clock spring
mine has like a slight wiggle to it nothing crazy tho so if its something like that then yeah! I just made sure everything was tight and so far its good!
Aint no way u welding that if it breaks u gonna learn the hard way there guys dont listen to these to fools they gonna get u in a cartruck wreck just swap the damn whole steering column
Swap the damn steering column problems solved
This foo said takuache warning🤣🤣
😂😂😂😂😂
Oh heck no that’s a pain in the butt
it was 😭
That’s too much work, I’m just gonna stick to my 99-02 steering wheel 😂
It was alot of work just get a quick release lol
don't the air bags from the HD trucks only have one wire? Maybe you can use one of those. Agearhead for life did the same awap.
Good to know! I knew one of them had it I just wasn’t sure which model thanks for the info.
Yeah but it has to be from a 2003 HD just to be safe
@AllendeNL it can be from any year and any model but the thing is IT HAS TO BE from a truck with roll up windows
Respect. Hard job. Finished to Completion.. well done. However next time simply extract the splined female portion that goes over this shaft you swapped. Simply cut out both wheels center's and swap the one over to weld it. Easy easy easy. An hour tops
Thank bro we appreciate it! and we had actually thought about doing it that way too but simply didn’t want to go back to the junk yard and get more parts lol either way came out great! 🔥
Badass video man I like your ambition to make things swap. I have 3 of the gmt800 series 2 trucks 04,06 2500hd 02 Tahoe. Did a full Escalade interior swap including full dash and it blows me away how different they are the whole wiring and all switches are different. I’ve been wanting to put a stingray steering wheel and the Tahoe out of one of the new Corvettes so I went and found one of the splines and chopped it off and I’m going to do the same thing like you did. I never messed with the clock spring in the airbag things on the O2. I just pulled the dash cluster and popped the bulb for the airbag lol so the light isn’t on anymore. But I’ve checked through countless forms online and all you see on there is people writing bs. Answering your questions with well I had a buddy that did this or somebody that did that but they don’t have any experience on the subject so it’s like man why are you even commenting wasting my time giving me some dumb information there’s no good or the people they can’t be done no way no how I had one of the admin’s tell me that about putting those seats in and I was like yeah right i’ll figure it out the work because when you flip them over and look at both of them all of the motors and set up are the exact same plugs that go into motor so I got to tear into the wiring on it and is the same just adding more shiz to the 03-06 but I got them to work so if you want it you can figure it out. Thanks again for the video
Yeah man it’s amazing how similar these trucks all are but then again so different. You’re are absolutely right same thing when I was looking for stuff a lot of bs and no direct answers. Yeah bro there’s always a way to get things done whether people say it’s not possible, if there’s a will there’s a way. Anyways, Thanks for tuning in bro, we appreciate it 🤙
So you took a factory steering wheel off and replaced with another factory steering wheel? All that for just a plain factory wheel? I don’t get it
for a better looking steering wheel while keeping a factory look basically lol
Foo just fuking change the steering only u did too much smh jajajajjq mealenous
aye it came out good 🤣
you just needed to change the electrical parts on the new steering wheel, your job is dangerous
still holding strong till this day 💪
Anyone need a airbag 03+ with 1 connector for this swap i have 1 available, also your able to make the steeringwheels controls work from the 03+ on the 01 with aftermaket radio splicing into the clock spring
Be WAY easier just to swap the entire steering column
forsure would but was working with what i had at the moment lol still holding on strong till this day 👌
Sik af 🔥🔥
Yessir! appreciate it bro! I see la stepside 😮💨🔥
Edit: I had the same problem. I thought about welding the spline from old wheel onto new but this looks a lot cleaner
Agreed! as long as you get a clean cut and good measurements it’ll look and feel OEM! New wheel feels great!
@@ErikRose_I found out the 2006 express van is a bolt on
has it been confirmed? ive been researching and i cant find anything on it.@@fintansky9369
For the Silverado 1500?@@fintansky9369
Were you able to swap the clock spring fine, or was the wiring different?
it was different but it is possible either changing the clock spring or getting the airbag that matches the one you have!
I swapped mine and the steering wheel is lose did you have this problem?
mine has like a slight wiggle to it nothing crazy tho so if its something like that then yeah! I just made sure everything was tight and so far its good!
Do you get the horn to work?
yeah my horn still works !
Can you post a link to where you got that tool? To pull the threaded bolt thing out?
You can rent it at autozone or oreillys !
Where can i find that little tool to remove the bolt??
you can rent it at autozone or oreilly’s !
@@ErikRose_ thanks bro!Appreciate it!
@@ErikRose_ you got a part number??
Aint no way u welding that if it breaks u gonna learn the hard way there guys dont listen to these to fools they gonna get u in a cartruck wreck just swap the damn whole steering column
If done properly either way works, if you don’t mind mind removing a steering column go for it.
Where you get those rods?
junk yard their everywhere if you look at all chevy trucks/vans in similar years!
Whats link to get the spline?
I actually got the spline from the junk yard lol
the fact you gotta break some shit lmao hell nah.
just buy a cateye duramax and be done with it!
Haha
more like modify lol but yup not the easiest job!
You really thing everyone got cateye duramax money??
Wanna bet dudes steering wheel never set straight with the wheels lol
you’d be surprised it actually came out very well, we made sure with measurements, almost seems OEM!
Did mine and the horn doesn't work😅
My horn works, did you reconnect it correctly?
Nope I didn't connect it correctly 😕 lol I fixed it it works now 🤣🤣🤣
🤣 awesome glad you got it haha
Bro telling us how to do it and he haven’t even the one doing it 💀💀
Just what I needed......BUT THAT RED ALERT LOL......
gotchu bro ! 💪😂