Link to suction cup setup for the insta360 I have in this video. www.amazon.com/Fotoleey-Suction-Insta360-Compatible-Included/dp/B0C2K2LZR9?ref_=ast_sto_dp
Nice upgrade! The very first mod I did to my truck over 5 years was install the Lariat dash, what an improvement. I think it had 22 miles on it. Can't wait to see some content with the new camera.
The digital dash is sweet and it just makes the hole dash look so much better and that 360 is nice should be some killer footage great up grade to the car
I specifically bought my car because it had a digital dash and 20 inch wheels LOL 😂 .... take your resonator out, man is it a big difference in sound...... another good video from you. 👍... take a look at my videos if you care, I have some videos of the resonator delete and draggy runs.😮
I almost didn’t buy my car because it didn’t have the digital dash. After owning so many S550’s and not having it in any of them. But the car checked all the other boxes. Now it’s complete as far as factory options that I wanted. Thank you and I’ll go check the videos out!
Bit confused so I am lund tuned so locked tune. Would i have to flash the stock tune in, configure the boost gauge in. Then flash the lund tune back in? Would that keep the boost gauge or will I have to add it again?
Hi, I had a question about the digital dash and forscan. Are there any other changes you can do to the digital dash cluster other than adding the boost gauge? Like maybe adding a different type of gauge layout other than the ones that are preloaded?
Can you do a video showing how to extend the speedo from 160 to a higher mph? I've heard with forscan you can upload the mach 1 or bullet edition dash layout on a regular GT with the digital dash.
So I did your way instead of going to As bulit... I got the gauge but for some reason it's mot reading boost ... I want to try the other method in "As built" but I found 2 completely different numbers to add to get the gauge. Wanna know what's the difference.
Great video with the boost gauge content. I have a 2019 GTCS with a Roush Phase 2 kit that was just installed in May. Would I need to tune it back to stock to make the changes in forscan?
How do I go about doing this if I have a locked aftermarket tune? You said I’d need to tune it back stock and create a profile but do I tune it back after that and then continue or do I leave it in stock while I change the settings around?
Yes if the tune isn’t locked you can do it. If it is locked, you just need the pcm number to put into forscan to be able to do it. No, it won’t affect the tune any.
@@SpeedAddict731 thank you so much!, I doubt it's lock but thank you for the info... Man I'm scared, I won't be able to turn the car on if this can effect the tuning... Are you 1000% sure it won't?
@@muhammedb7232 I already had the tune on my car when I done mine. Same with a ton of others. Just remembered this is inferred. So if maf curve is off in the tune so will the boost amount. Mine is usually very close on my cars.
@@SpeedAddict731 thank you appreciate you! I have boost controller that read boost, so I'm not gonna rely on this one.. i just like how it looks & if it close enough or a bit off to the boost controller, I'm happy lol
@SpeedAddict731 Only modd is ess g3x, 120mm, bap, 1050, imrc delete, on 93 fuel. Stock everything else. As for rpm I think I got close to 7400 to 7600. Idk I'm tuned by wengerd as well. I was focus on looking at the boost gauge lol
Link to suction cup setup for the insta360 I have in this video.
www.amazon.com/Fotoleey-Suction-Insta360-Compatible-Included/dp/B0C2K2LZR9?ref_=ast_sto_dp
Digital dash is one of the best upgrades for the S550, imo. Looks awesome!
Definitely! Thanks.
@@SpeedAddict731can you adjust speedometer displayed top speed and rpm on digital dash with the device you used?
Nice upgrade! The very first mod I did to my truck over 5 years was install the Lariat dash, what an improvement. I think it had 22 miles on it. Can't wait to see some content with the new camera.
The digital dash is sweet and it just makes the hole dash look so much better and that 360 is nice should be some killer footage great up grade to the car
What a awesome touch, those digtal dash cluster are the deal, that is the finishing deal, Nice job Ken.
I specifically bought my car because it had a digital dash and 20 inch wheels LOL 😂 .... take your resonator out, man is it a big difference in sound...... another good video from you. 👍... take a look at my videos if you care, I have some videos of the resonator delete and draggy runs.😮
I almost didn’t buy my car because it didn’t have the digital dash. After owning so many S550’s and not having it in any of them. But the car checked all the other boxes. Now it’s complete as far as factory options that I wanted. Thank you and I’ll go check the videos out!
Bit confused so I am lund tuned so locked tune. Would i have to flash the stock tune in, configure the boost gauge in. Then flash the lund tune back in? Would that keep the boost gauge or will I have to add it again?
Awesome video brother. Thanks for sharing. Keep the content coming. Hope you have an incredible week. Much love and RESPECT
Thank you and same to you!!
Great vid! Still waiting to see the fore innovations fuel system install on a car, hopefully soon!
Very nice Ken!
Love this! Ordering the obd2 plug now. Thank you
I love my digital dash 🤩
Hi, I had a question about the digital dash and forscan. Are there any other changes you can do to the digital dash cluster other than adding the boost gauge? Like maybe adding a different type of gauge layout other than the ones that are preloaded?
Can you do a video showing how to extend the speedo from 160 to a higher mph? I've heard with forscan you can upload the mach 1 or bullet edition dash layout on a regular GT with the digital dash.
The insta360 is 🔥 Next time I’m up your way I need that boost gauge enabled on my car.. my gauge only goes to 15psi 🤣
We can hook it up for you!
@@SpeedAddict731and that dual UPR catch can 🤣
Love the digital dash! Any videos of your S197 at the track coming in soon 👀
Digital dash is my next mod for sure.
So nice to have!
Thank you 🤛
You’re welcome! Thank you!
So I did your way instead of going to As bulit... I got the gauge but for some reason it's mot reading boost ... I want to try the other method in "As built" but I found 2 completely different numbers to add to get the gauge. Wanna know what's the difference.
Great video awesome car Ford powered forever baby keep on pulling the knot out of them boties and the horns off them mopars l love it
Thank you sir!
That digital dash is awesome. I love mine. So much easier in an 18+. You have a link for that camera mount?
I’ll send it to you!
Ready for track videos! Pulley down or converter…either way looking forward to some footage 😎
Coming soon!
How do you remove airbag unit if you do *not* have tiny holes on the steering column?!??
The digital dash is nice. The earth is round.😂
Haha you watched till the end. Thank you sir!
@SpeedAddict731 I always watch to the end to help support the channel. I enjoy all the great information you put out.
If you have a Roush tune is it locked to where you can't turn on the boost gauge ?
First to say, great job!
Thank you sir!
No adapter found is what mine says. I bought the same adapter you have.
Great video with the boost gauge content. I have a 2019 GTCS with a Roush Phase 2 kit that was just installed in May. Would I need to tune it back to stock to make the changes in forscan?
Looking gooder😊
Appreciate it!
237 Distance to empty 😲😲 my car with a full tank is displaying 135 DTE??
Do you know how to install the base cluster on a 14 gt to the premium cluster and program it as well?
Can you give post a link for the suction cup mounts that go with the insta360?
I will.
I pinned it in a comment on this video.
How do I go about doing this if I have a locked aftermarket tune? You said I’d need to tune it back stock and create a profile but do I tune it back after that and then continue or do I leave it in stock while I change the settings around?
You can change the stuff around with the stock tune and load the tune back in when you’re done.
@@SpeedAddict731 awesome thank you!
So if your tune isn't locked, you will be able to add the boost/vacuum gauge there? It shouldn't effect the tune at all right?
Yes if the tune isn’t locked you can do it. If it is locked, you just need the pcm number to put into forscan to be able to do it. No, it won’t affect the tune any.
@@SpeedAddict731 thank you so much!, I doubt it's lock but thank you for the info... Man I'm scared, I won't be able to turn the car on if this can effect the tuning... Are you 1000% sure it won't?
@@muhammedb7232 I already had the tune on my car when I done mine. Same with a ton of others. Just remembered this is inferred. So if maf curve is off in the tune so will the boost amount. Mine is usually very close on my cars.
@@SpeedAddict731 thank you appreciate you! I have boost controller that read boost, so I'm not gonna rely on this one.. i just like how it looks & if it close enough or a bit off to the boost controller, I'm happy lol
Can you give us the amazon link to the device used alongside the forscan software?
Thanks, I found it 👍 (
OBDMONSTER ELM327 FORScan OBD2 USB Adapter for Windows)
If Wengered Tuned do I need to first return the car back to the stock tune prior to using forscan for the boost gauge option? Anyone?
I need that! 😆
Yes sir!
🇺🇸
How accurate is this bolt in boost gauge?
If the maf curve in the tune is right on it will be fairly accurate. I do plan on putting a boost gauge in to compare at some point.
@SpeedAddict731 I see alot of mustang6g users saying it's pretty accurate. Haven't seen any ESS user say it is though.
@@SpeedAddict731Just did mine. Shows 9 to 10 lbs when full boost. G3x 120mm 93 octane
@@Fingamyaz at what rpm and do you have headers?
@SpeedAddict731 Only modd is ess g3x, 120mm, bap, 1050, imrc delete, on 93 fuel. Stock everything else. As for rpm I think I got close to 7400 to 7600. Idk I'm tuned by wengerd as well. I was focus on looking at the boost gauge lol
"promosm" 😑