He'll yeah this its what I need I sent a engine to get done for someone else but went I see the engine on top dead center it looks kind of low the piston and rods are for boost but still look to low I'm gonna inspect all that before swapping it
I am going to degree the cams. I mentioned that in the video. It will probably be my next video. I still plan on adjusting the gears in then Dyno after degreeing so I still want to know where everything lands
I considered it but im worried about throwing the balance of the pistons off especially with all the rpm this engine will see. Im going to stay at -2 and jump up top a .040 head gasket
Awesome video man! Keep them coming!!
Set to zero only on the exhaust side! Cool videos. You should make more
He'll yeah this its what I need I sent a engine to get done for someone else but went I see the engine on top dead center it looks kind of low the piston and rods are for boost but still look to low I'm gonna inspect all that before swapping it
Tq bro... Nice video ❤️❤️❤️
When you do this do you torque the head down? Or just hand tighten the bolts?
Torque them down
Do i need to do this with type s pistons upgrade??
@@finbarodwyer5280 no should be good with factory components
Good
Should get a cam degree kit to make life easier. KStuned sells them on site & few other companies
I am going to degree the cams. I mentioned that in the video. It will probably be my next video. I still plan on adjusting the gears in then Dyno after degreeing so I still want to know where everything lands
@@H22PreludeDude what camshaft do you used and what CR piston?
@@izzat2804 skunk2 pro2 and a custom 10.7:1 piston
@@H22PreludeDude great.. my camshaft also skunk2.. 💪💪💪
@@H22PreludeDude if intake cam advance 2 degree, do Exzos cam have retard 2 degree also?
Use a porting tool and make the valve pockets wider on the pistons.
I considered it but im worried about throwing the balance of the pistons off especially with all the rpm this engine will see. Im going to stay at -2 and jump up top a .040 head gasket
I absolutely wouldn’t worry about that little bit of material for balance
#TheFEW
Hell yeah, good content! I’m learning some new stuff here! 🫡🙌