Sitting here in my carport. Just found some butter wet wax in my detailing stuff and applied it by machine while I listened to a baseball game. Man it looks good. Doesn't seem to dust either like the latest and greatest. Give it a try! I hate the dust that accumulates from the spray stuff.
What’s the process if I’m going to perform paint correction, use ceramic coating, and glaze? Use glaze after paint correction or after ceramic coating?
can i put a layer of hydroslick and then a layer of jet seal on top of that on my windshield/windows? or just one of them and if so which one is better and longer lasting on the windows
@@ChemicalGuys hey sorry for asking so many questions i want to get this right but thank you for the fast replies. how long should i wait between applying another product on top of another?
@@ChemicalGuys Awesome thank you for the quick reply. I just ordered a ton of stuff and didnt get any sealant but got glaze and wax, just wanted to make sure I wasn't going to hurt anything by not doing a sealant. I realize its better to than not but I blew my budget on wheel cleaner, tire shine, some pads, headlight restore etc etc. Ill try doing a sealant next time around. Thank you guys again!
It depends if your clear coat has minor defects, otherwise just wax to keep your clear coat protected. Your clearcoat is only so thick, so don't mess with it if you don't have to. If you can feel some grit on your clean pain, clay it first, the synthetic clay bar works great. You should always do a test spot anyways, do a test section with just the wax to see what you'll end with, and go from there if you need to go more aggressive, but It's always better to start less aggressive to preserve the life of your clearcoat. Take your time and have fun.
Hi Guys Iv got a white Porsche - usually I pre rinse , CG snow foam , rinse , wash by hand , dry , CG clay bar , then I’m using your CG white light product followed by an auto finesse graphene wax - what products can you suggest for a white metallic plz
Hi Ron! That's correct, apply glaze, sealant, and/or wax in that order. After the glaze has bonded there is no need to clean the panel before applying sealant.
I live in apartment in Florida. Sprinklers usually hit my car and leaves water marks all over. I wanna try the waterless wash, but what else can I use to prevent my car from getting dirty so often from the sprinklers?
Hi Bryan! After cleaning your vehicle, apply HydroSlick to lock in shine while repelling harsh elements and rejecting water drops. www.chemicalguys.com/hydro-slick/Hydro-Slick.html?gtmListValue=Internal%20Search
Your going to want to wash your vehicle then clay bar it. After you clay use chemical guys water spot remover, having water sprayed on ur car an being constantly baked in the sun is really going to cause clear coat damage. You want to protect your paint you want to use a sealant I like jet seal applied with a random orbital because it's a polish an sealant so it removes light imperfections. Then top coat the jet seal with a spray wax and spray wax it after you wash the car and dry it every time. It'll help the jet seal last.
I wished yal could throw in some analogies for us non car detailers. I'm an Uber driver that's gotta keep my car immaculate. Just break it down for some of us that aren't savy in this field.
after polishing step do i apply hydro slick, sealant then wax or is it sealant, wax then hydro slick? or instead of the butter wet wax step could i just apply sealant then hydro slick?
Wow I would have given you a thumbs up just for offering the flow chart! The video helps teach especially to someone like me just starting to take care of my car. I had to turn on the captions because I thought you said, “duel” when you said “dull” as in the look of the finish. It’s all good…that’s why they make rewind on the remote. I like 👍🏼 all Chemical Guys videos and I am trying to purchase other products from your web site right now (not so easy 😓). And yes, I am subscribed.
I'm glad to see the comparisons in sections! Great video explaining the differences! I love Chemical Guys products so much. Butter wet wax needs a spray scent it smells awesome 😎🎉
I use blacklight wash and glaze, jet seal & butter wet wax..... will try this combo soon...also V07 is a winning combo...
Enjoy your detailing products!!
@@ChemicalGuys I do every Monday I decompress from my work week and at least wash,wax and hit those wheels.
I just threw away all my chemical guys
I have a new truck and wanted to know if I could skip the clay bar and just glaze and wax.
I have a black car. I used VSS and butter wet wax. What if anything would come next?
Or what would make the black look better?
Just to be clear. Apply a glaze first, then sealant, and then wax?
That's right!!
Sitting here in my carport. Just found some butter wet wax in my detailing stuff and applied it by machine while I listened to a baseball game. Man it looks good. Doesn't seem to dust either like the latest and greatest. Give it a try! I hate the dust that accumulates from the spray stuff.
Gotta love Butter Wet Wax!!
What if i wanna protect from uv rays but i wanna use butter wet wax
can you do a layer of hydroslick, then whitelight, jet seal, and butter wet wax on top?
Absolutely, that is totally fine!
Did you try it?
Do you have something called Hydro seal? With ceramic seal
I left my butter wax sit in the sun and turned to a liquid is it still good?
Hey! Shake the product and inspect for separation but it should be fine.
Cool I think I'm going to pick up the butter wax 🤔
You're going to love Butter Wet Wax!
I've used butter wax on my wife's red car. Just washed and waxed it, made it all nice and shiny.
Love the butter wax! I have some Black Light glaze coming for my Antimatter blue paint.
What’s the process if I’m going to perform paint correction, use ceramic coating, and glaze? Use glaze after paint correction or after ceramic coating?
Hi there! After the paint correction, apply ceramic and then glaze.
Is it better to Seal after waxing?
No, put down your Seal first. Make sure it's cured then you can top it. I top HS or HC with BWW or V07 Wax.
Hey! Following the Chemical Guys Detailing Flowchart, we recommend to apply sealant before wax.
@@SyphADL87 cured meaning after its wiped off right?
can i put a layer of hydroslick and then a layer of jet seal on top of that on my windshield/windows? or just one of them and if so which one is better and longer lasting on the windows
Hey David! It is perfectly fine to apply HydroSlick and JetSeal.
@@ChemicalGuys hey sorry for asking so many questions i want to get this right but thank you for the fast replies. how long should i wait between applying another product on top of another?
Can you glaze then wax? Is the sealant necessary?
Absolutely! It is totally up to you to choose which coatings you want to apply.
@@ChemicalGuys Awesome thank you for the quick reply. I just ordered a ton of stuff and didnt get any sealant but got glaze and wax, just wanted to make sure I wasn't going to hurt anything by not doing a sealant. I realize its better to than not but I blew my budget on wheel cleaner, tire shine, some pads, headlight restore etc etc. Ill try doing a sealant next time around. Thank you guys again!
Do you have to use the first three steps before the wax?
It depends if your clear coat has minor defects, otherwise just wax to keep your clear coat protected. Your clearcoat is only so thick, so don't mess with it if you don't have to. If you can feel some grit on your clean pain, clay it first, the synthetic clay bar works great.
You should always do a test spot anyways, do a test section with just the wax to see what you'll end with, and go from there if you need to go more aggressive, but It's always better to start less aggressive to preserve the life of your clearcoat.
Take your time and have fun.
Hi Guys Iv got a white Porsche - usually I pre rinse , CG snow foam , rinse , wash by hand , dry , CG clay bar , then I’m using your CG white light product followed by an auto finesse graphene wax - what products can you suggest for a white metallic plz
What’s the necessary cure time between each of these layers? Thanks!
Hey Gabriel! Allow about 10 to 15 minutes for each layer to bond to the surface before wiping away spent product.
So I could put seal and shine over the glaze? Does it require a panel clean before the sealant
Hi Ron! That's correct, apply glaze, sealant, and/or wax in that order. After the glaze has bonded there is no need to clean the panel before applying sealant.
I live in apartment in Florida. Sprinklers usually hit my car and leaves water marks all over. I wanna try the waterless wash, but what else can I use to prevent my car from getting dirty so often from the sprinklers?
Hi Bryan! After cleaning your vehicle, apply HydroSlick to lock in shine while repelling harsh elements and rejecting water drops.
www.chemicalguys.com/hydro-slick/Hydro-Slick.html?gtmListValue=Internal%20Search
Your going to want to wash your vehicle then clay bar it. After you clay use chemical guys water spot remover, having water sprayed on ur car an being constantly baked in the sun is really going to cause clear coat damage. You want to protect your paint you want to use a sealant I like jet seal applied with a random orbital because it's a polish an sealant so it removes light imperfections. Then top coat the jet seal with a spray wax and spray wax it after you wash the car and dry it every time. It'll help the jet seal last.
So after I do a paint correction next would be ceramic coat then glaze or wax or sealant?
Paint correction, ceramic, glaze, sealant, butter wax. I think haha. going to do mine without the ceramic step 🤙
Can i use glaze and then instead of jet seal to use butter wax and use it for example every 2 months?
Absolutely!!
so first glaze, then sealant, then wax?
Hey Michael, that is correct!
@@ChemicalGuys great... thanks! I purchased all 3 but was unclear on the order they are to be applied...so thank you!
Will the ceramic stick if I wax first?
Hey! For best results, we recommend to apply ceramic to a bare surface then it can be layered with your favorite glaze, sealant, and/or wax.
Do you have use clay bar before using butter wet wax
Hi Sammy! Yes, it is best to clay bar the surface before applying Butter Wet Wax.
Could I use this combo to remove light scratches off my motorcycle by hand?
Absolutely!!
Am I missing something? Can I just use the butter wax and skip the others? Thanks.
Hi there! Absolutely, you can move straight to applying wax or for added depth and protection use a combination of glaze, sealant and/or wax.
Is Glaze only for painted surfaces (not glass/chrome)?
Hi there! Glaze is safe for use on any surface that is gloss painted, shiny or clear.
Can u mix butter wet wax with mirror finish? Have both love both
Absolutely!
@@ChemicalGuys okay I applied butter wet wax then mirror glaze is that okay?
What should use to protect after I buffed my car?
Hey! Apply HydroSlick to lock in shine and repel harsh elements.
www.chemicalguys.com/hydro-slick/WAC22916.html?gtmListValue=Internal%20Search
Can you use the black pad with butterwax?
Absolutely!
@@ChemicalGuys thanks!!!
Can you apply Butter wt wax to a PPF?
Absolutely!
Good job guys
Thanks for watching!
What do you guys recommend to polish cheap a single stage paint job?
Hey! You can use a light polish such as V36 Cutting Polish with an Orange Hex-Logic Pad to remove swirls, oxidation, and stains.
I wished yal could throw in some analogies for us non car detailers. I'm an Uber driver that's gotta keep my car immaculate. Just break it down for some of us that aren't savy in this field.
Great suggestion!
after polishing step do i apply hydro slick, sealant then wax or is it sealant, wax then hydro slick? or instead of the butter wet wax step could i just apply sealant then hydro slick?
Hey! That's correct, after polishing you can choose to apply all or a combination of ceramic, glaze, sealant, and/or wax.
Awesome video.
Glad you enjoyed it!
I tried doing this on my truck but whipped off right after applying no wonder it didn’t work lol
Thanks so much for tuning in!
We need to see that land cruiser
😃😃
Good vid.
Thanks for watching!
Can you still use hydro speed after applying the glaze seal and wax?
Absolutely!
awesome !!! you guys should do an RV video !!
Great idea!!
Wow I would have given you a thumbs up just for offering the flow chart! The video helps teach especially to someone like me just starting to take care of my car. I had to turn on the captions because I thought you said, “duel” when you said “dull” as in the look of the finish. It’s all good…that’s why they make rewind on the remote. I like 👍🏼 all Chemical Guys videos and I am trying to purchase other products from your web site right now (not so easy 😓). And yes, I am subscribed.
Thanks so much for being part of the Chemical Guys family!
Can you make this video in Spanish?
Thanks so much for your suggestion!
1st
Happy detailing!!
Can I get the products ❓
Am from Nigeria...
Great info. Thank you very much
Happy detailing!!
I'm glad to see the comparisons in sections! Great video explaining the differences! I love Chemical Guys products so much. Butter wet wax needs a spray scent it smells awesome 😎🎉
Glad you enjoyed the video!