Andy, this video needs more visibility. I spent ages de-soldiering the XM receiver on my Tiny7 and Tiny7x to make up a cable to then flash it with EU FW, never knew it was possible to flash the TX for the FCC FW, so much easier! Thank you!
Wow! I had problems to bind the XM+ (of which I bought two). Flashing firmware was ok but it wouldn't bind, with both led on the XM+ on. The flashing of the XJT was the hint I needed. Thank you so much for that.
@@alextkd2003 Yes, as I said you have to update the firmware of your transmitter module within your Taranis, which is called XJT. The firmware of the XJT must match the firmware version of the receivers and is more ot less independent from the opentx version you use.
@@alextkd2003 And you probably used LBT or FCC on both transmitter and receiver. Be sure you have at least half a meter distance between transmitter and receiver when binding. Does it work for other receivers you own? There is always the possibility of a faulty unit, although I never had one between the twenty I had so far.
@@the_real_foamidable It's working now, it is really weir, to bind I moved like a half meter away the receiver and is green now. Thanks man for all your help :)
The receiver I used in my first build ever, xm+. Now I'm using room lite with r9mm,f.port is great, thing is about size of a fingernail... Awesome awesome. awesome.
Awesome man..! I have a question: How are the X4R Receivers? How far do they go, does it have anything like a brownout? (Because my V8FR-II does brownout.. I’m looking for a brownout-free receiver)
Just put an xm+ in my Pico x I built after you recommended it to me over others. it's the coolest, funnest thing I've ever flown and I can't thank you enough. would've never known about it otherwise.
From Italy you are the best! excellent explanation and vary easy to resolve this tipe of problem for me. i appreciate your help and the time you spent on internet to record video you sould have more like than that
I have a devo 7e and finally got a successful bind last night, range test was great everything working smoothly. It was bound for maybe and hour. I was getting a perfect signal in test mode no matter how hard I tried to make it loose signal around the house. Xm+ here. I was in betaflight setting some switches up and the receiver just stopped working. I was changing the aux channels on the transmitter for flight modes in betaflight and it just stopped receiving. When I power it lights up dim solid green/red and doesn't do anything, no different if I power it on while holding the bind key. It should be a bright solid green and blinking red in bind mode. Sometimes if I wait a while to plug a battery in and don't hit the bind key it will light up solid red. I tried to bind it again but nothing happens. I'm at a complete loss. I reset the profile and tried to bind again no luck.
hi Andy. well just wanted to tell everyone who are interested on this receiver that i have 8 of this receiver (xm+) and 2 more on the way..! its the greatest receiver I've ever had..! i tested the rang'' is more then 1000 meter in open aria and around 600to 800 meter in the city with tall buildings and as long as your fc supports osd you do have very accurate rssi value on the screen and on the receiver is on channel 12 and in betaflight you got to type channel 16 and all of my 8 xm+ receivers'' i did NOT have to do anything for the fail safe activation they came already set even rssi was already showing up in betaflight i just had to sign in channel 12 in my Taranis plus thats all i did..(:
you're absolutely correct .. i live in north america so i didn't have to do anything... love your videos.. have you on 3 different utb channels.. learning alot from you.. i do really appreciated...thanks bro..
I've also been using the XM+ for a while now, great range but I had a few issues at the start so just a heads up: didn't bind to my Taranis (EU, LBT) out of the box so I had to flash the receiver with a new version from frsky website (a version that just came out that day) and been getting random spikes on channel one, causing weird twitches. Turned out to be a bug in the firmware, updated it to a newer version a month later and the issue was gone. Also it seems to trigger failsafe when you hold the receiver close to the Taranis, (flooding?) so make sure failsafe is set correctly and motors don't spin up!
Good to see you dump the non standard (Inferior) EU / LBT Firmware Andy. I had my Taranis for a while and it came with the International Firmware...... Mode 1 user too...like me....Good man....lol. Oh, and I ordered one of the tiny XM receivers to go with my Omnibus F4 FCs....The RSSI feed and the fact I can easily bury it out on a wingtip did it, that and the claimed range for this tiny RX.
AndyRC, thorough as always. Thank you. Could I use this receiver for the Diatone GT200, plug in? Or would I need to solder? I'm terrible at soldering....I am practicing though.
Im putting 3:28 here for quick access to failsafe. If someone booby traps your model by setting failsafe to full throttle forward you need to know how to reset it to drop
i have a few drones and one plane by now and i am about to buy a hobby grade transmitter maybe the Qx7 taranis, what i have not understand is why there is an EU and an FCC version in transmitters and recievers.Is it a legal issue? can both operate in europe? could they be changed from one version to another?which you reccomend? thanks again i am a fan of your channel!!!
Great video as always, but I have a question. When I tried this on my QX7, I got an error message saying no bottom pin response. Should I be enabling the external RF in the Taranis menu and if so, what do I set it to? SBUS? Thanks in advanceGary
I have an old Turnigy 9X radio which I have converted to FrSky with a DIY module from FrSky. Am I right assuming that due to the age of the module (2-3 years old) it won't run with the XM+ receiver?
Now you will have better range as the old EU firmware had to limit output power to comply with the regulations. EU LBT is transmitting at full power and also it's constantly searching for cleanest channel and then using it. So it's safer to fly together with other transmitters. International version just blasts to the whole spectrum :)
i have a few drones and one plane by now and i am about to buy a hobby grade transmitter maybe the Qx7 taranis, what i have not understand is why there is an EU and an FCC version in transmitters and recievers.Is it a legal issue? can both operate in europe? could they be changed from one version to another?which you reccomend? thanks
Yes, EU and international are due to legal regulations in EU. Current EU firmware is EU LBT - listen before talk. It actively scans bands and only transmits to those bands where is no signal detected. So it's safer for other radio systems nearby and it's a requirement in EU. International just transmits to all bands and doesn't care if there's signal on it or no. Well, Taranis works by hopping on different frequencies to make signal more resilient. One thing regarding EU firmware is that there are 2 of them. Old one called simply EU, this one has been discontinued and it had weaker output power and limited receiver protocol support as it had no listen before talk feature. So you will get shorter flying range. After some time second firmware was developed, called EU LBT. So they implemented that legal requirement to have LBT and were allowed to transmit at full power. So if you need EU firmware, use EU LBT. Now if you want to get a radio .... probably get international :) I'm in EU too, using international, still not in jail :) You can change the firmware of the radio and receivers afterwards if you need that. And most of receivers on online shops are international.
RandomWisdom Clear and concise explanation, this is all of the information I was looking for so thank you. You have saved me so much research time! I owe you a pint, for now though a subscribe.
I verified that the firmware is on the SD card, however it doesn't show up when I navigate to it on the Taranis. Not sure if it's relevant, but I'm on opentx-taranis-plus-2.0.19 (bootloader 2.0.19)
Sooooo, if I understand you correctly, this RX will work with my US Taranis 9D+ (FW v2.0.9)? Sure is a tiny package, and at about $13 USD, very affordable. Cheers.
I have been trolling the net for a few days trying to find out something. No one can give a straight forward answer and I really hope you can. Using the xm+ with a fc that has NO telemetry and NO osd "for example the babyhawk" can this receiver send rssi to the radio?
so I'm getting a taranis qx7 most likely and I want my transmitter to tell me when "telemetry low and telemetry critical" do I need to setup a telemetry port for that and is it worth getting x4r or xsr vs xm+
need to have a warning that radio to xmplus firmware upgrade may just brick your XMPlus turning into a piece of unusable shit. guess I will try an X4R and hope it works. if not I will just go back to PPM which hasnt proven to be a confounded pile of shit.
Your tutorial was excellent, its just that for years I've been into rc stuff , cars, truggies, boats, helis, and now quads. I've always bought RTFs that came with a Tx. So I obviously have quite a lot of Txs . I would like to get a Taranis and bind all my aerials to it but for me it's so confusing as what will bind and what won't . I have several eflight helis and quads, a phantom 2 clone and some toy grade tiny whoops. I saw a vid on binding a Taranis to a eachine 010 but was lost in the terminology. I would like to see a detail tutorial explaining the differences between Frsky , flysky, dsm, futaba etc protacols. I really enjoy your vids and learn a lot but all the different terminology tends to scramble my brain. Anyway, keep up the good work. Love the vids.
if your using a taranis u need the frsky rx. if u wish to bind a model with the dsm or dsmx rx then u will need the orange rx module that goes in the back of the taranis the others work with different radios flysky and futaba etc. hope this helps
![[Part 1] ทารกน้อยถูกทิ้ง👶 หญิงชราเก็บขวดขายเลี้ยงดูเขาจนโต #โลกการละคร](http://i.ytimg.com/vi/nPTDvFCExks/mqdefault.jpg)
Andy, this video needs more visibility. I spent ages de-soldiering the XM receiver on my Tiny7 and Tiny7x to make up a cable to then flash it with EU FW, never knew it was possible to flash the TX for the FCC FW, so much easier! Thank you!
Wow! I had problems to bind the XM+ (of which I bought two). Flashing firmware was ok but it wouldn't bind, with both led on the XM+ on. The flashing of the XJT was the hint I needed. Thank you so much for that.
Hi, did you solve this issue, It happen to me also 🙁
@@alextkd2003 Yes, as I said you have to update the firmware of your transmitter module within your Taranis, which is called XJT. The firmware of the XJT must match the firmware version of the receivers and is more ot less independent from the opentx version you use.
@@the_real_foamidable thanks for the fast response. Yesterday I did the same, but did not work, my taranis have version 2.1.0 also the xm+ receiver
@@alextkd2003 And you probably used LBT or FCC on both transmitter and receiver. Be sure you have at least half a meter distance between transmitter and receiver when binding. Does it work for other receivers you own? There is always the possibility of a faulty unit, although I never had one between the twenty I had so far.
@@the_real_foamidable It's working now, it is really weir, to bind I moved like a half meter away the receiver and is green now. Thanks man for all your help :)
Superb tutorial. I have followed this and now rssi of XM+ is working with betaflight. My Taranis plus has got opentx 2.1.9 uploaded.
The receiver I used in my first build ever, xm+. Now I'm using room lite with r9mm,f.port is great, thing is about size of a fingernail... Awesome awesome. awesome.
Awesome man..! I have a question:
How are the X4R Receivers? How far do they go, does it have anything like a brownout?
(Because my V8FR-II does brownout.. I’m looking for a brownout-free receiver)
Just put an xm+ in my Pico x I built after you recommended it to me over others. it's the coolest, funnest thing I've ever flown and I can't thank you enough. would've never known about it otherwise.
awesome yes i love that model :)
From Italy you are the best! excellent explanation and vary easy to resolve this tipe of problem for me.
i appreciate your help and the time you spent on internet to record video you sould have more like than that
I like that you are doing more hardware things
theres a few hardware vids coming up next cheers
I have a devo 7e and finally got a successful bind last night, range test was great everything working smoothly. It was bound for maybe and hour. I was getting a perfect signal in test mode no matter how hard I tried to make it loose signal around the house. Xm+ here.
I was in betaflight setting some switches up and the receiver just stopped working. I was changing the aux channels on the transmitter for flight modes in betaflight and it just stopped receiving. When I power it lights up dim solid green/red and doesn't do anything, no different if I power it on while holding the bind key. It should be a bright solid green and blinking red in bind mode. Sometimes if I wait a while to plug a battery in and don't hit the bind key it will light up solid red. I tried to bind it again but nothing happens. I'm at a complete loss. I reset the profile and tried to bind again no luck.
hi Andy. well just wanted to tell everyone who are interested on this receiver that i have 8 of this receiver (xm+) and 2 more on the way..! its the greatest receiver I've ever had..! i tested the rang'' is more then 1000 meter in open aria and around 600to 800 meter in the city with tall buildings and as long as your fc supports osd you do have very accurate rssi value on the screen and on the receiver is on channel 12 and in betaflight you got to type channel 16 and all of my 8 xm+ receivers'' i did NOT have to do anything for the fail safe activation they came already set even rssi was already showing up in betaflight i just had to sign in channel 12 in my Taranis plus thats all i did..(:
yes i think they come with the rssi already flashed now. but they will come with the fcc version so if using lbt u will still have to flash cheers
you're absolutely correct .. i live in north america so i didn't have to do anything... love your videos.. have you on 3 different utb channels.. learning alot from you.. i do really appreciated...thanks bro..
TJ A how do you sign in channel 12??
I've also been using the XM+ for a while now, great range but I had a few issues at the start so just a heads up: didn't bind to my Taranis (EU, LBT) out of the box so I had to flash the receiver with a new version from frsky website (a version that just came out that day) and been getting random spikes on channel one, causing weird twitches. Turned out to be a bug in the firmware, updated it to a newer version a month later and the issue was gone. Also it seems to trigger failsafe when you hold the receiver close to the Taranis, (flooding?) so make sure failsafe is set correctly and motors don't spin up!
Sweet.. just what I was looking for Thanks.
Great instructional video, nice one Andy !!!
thanks Gordon!
Good to see you dump the non standard (Inferior) EU / LBT Firmware Andy. I had my Taranis for a while and it came with the International Firmware...... Mode 1 user too...like me....Good man....lol.
Oh, and I ordered one of the tiny XM receivers to go with my Omnibus F4 FCs....The RSSI feed and the fact I can easily bury it out on a wingtip did it, that and the claimed range for this tiny RX.
AndyRC, thorough as always. Thank you. Could I use this receiver for the Diatone GT200, plug in? Or would I need to solder? I'm terrible at soldering....I am practicing though.
Im putting 3:28 here for quick access to failsafe. If someone booby traps your model by setting failsafe to full throttle forward you need to know how to reset it to drop
i have a few drones and one plane by now and i am about to buy a hobby grade transmitter maybe the Qx7 taranis, what i have not understand is why there is an EU and an FCC version in transmitters and recievers.Is it a legal issue? can both operate in europe? could they be changed from one version to another?which you reccomend? thanks again i am a fan of your channel!!!
Great video as always, but I have a question. When I tried this on my QX7, I got an error message saying no bottom pin response. Should I be enabling the external RF in the Taranis menu and if so, what do I set it to? SBUS? Thanks in advanceGary
I have an old Turnigy 9X radio which I have converted to FrSky with a DIY module from FrSky. Am I right assuming that due to the age of the module (2-3 years old) it won't run with the XM+ receiver?
Haha just ordered one yesterday and now a review haha
awesome
Wow very simple! ! cant belive how little the weigh.... Cheers
Can I take the antennas off my non working x4r-sb n attach the directly to my xm+?
they sound great. and easy. now i get to try and find them in the states...lol
I have that Receiver in my furibee x215 but it won't bind to my flysky fx15 do I need to get a Taranis radio to run it.
HI would the xm+ be suitable for a 210 multirotor or would the x4r sb be more suitable?
@andyrc do you know if theres any way to calibrate the RSSI to show 0% on betaflight with the RSSI signal off
Can you please tell me how I can wire the d16 xm plus to my 90gt ? Thanks 🙏
Hey I love your channel I hope I grow up to be like you
I have 2 sitting here waiting to try, but no model and no radio to go with them... waiting for more mail haha
I need smallfrysky RX sbus for 5" stretch that's very compact but worry about range vs my x4r.sb
Is it possible to get the rssi display on the xm+ to display on your tarainis or only on the osd?
Nicholas Brown - I still can't get a straight answer on that either... (would prefer it displayed on the Taranis rather than in OSD)
Only on the on screen displays but not sure it the scaling is correct as failsafed around 60% hope this helps
Now you will have better range as the old EU firmware had to limit output power to comply with the regulations. EU LBT is transmitting at full power and also it's constantly searching for cleanest channel and then using it. So it's safer to fly together with other transmitters. International version just blasts to the whole spectrum :)
i have a few drones and one plane by now and i am about to buy a hobby grade transmitter maybe the Qx7 taranis, what i have not understand is why there is an EU and an FCC version in transmitters and recievers.Is it a legal issue? can both operate in europe? could they be changed from one version to another?which you reccomend? thanks
Yes, EU and international are due to legal regulations in EU. Current EU firmware is EU LBT - listen before talk. It actively scans bands and only transmits to those bands where is no signal detected. So it's safer for other radio systems nearby and it's a requirement in EU. International just transmits to all bands and doesn't care if there's signal on it or no. Well, Taranis works by hopping on different frequencies to make signal more resilient. One thing regarding EU firmware is that there are 2 of them. Old one called simply EU, this one has been discontinued and it had weaker output power and limited receiver protocol support as it had no listen before talk feature. So you will get shorter flying range. After some time second firmware was developed, called EU LBT. So they implemented that legal requirement to have LBT and were allowed to transmit at full power. So if you need EU firmware, use EU LBT. Now if you want to get a radio .... probably get international :) I'm in EU too, using international, still not in jail :) You can change the firmware of the radio and receivers afterwards if you need that. And most of receivers on online shops are international.
more than helpful!!!!! thank you very much!!!!
RandomWisdom Clear and concise explanation, this is all of the information I was looking for so thank you. You have saved me so much research time! I owe you a pint, for now though a subscribe.
I verified that the firmware is on the SD card, however it doesn't show up when I navigate to it on the Taranis. Not sure if it's relevant, but I'm on opentx-taranis-plus-2.0.19 (bootloader 2.0.19)
Just to be clear: you're saying that I can get the RSSI reading on the Taranis (next to the Taranis battery reading), correct?
I have one of these but I'm still not sure from this video how to get the RSSI on channel 8. Could you explain how you did this?
you will have to flash it with the firmware that says channel 8 in the FRK file i beleive its setup to produce on channel 16 out of the box
OK got it thanks. One last question EU version is that FCC or LBT?
FCC is international version and lbt is EU version cheers
thank you.
Do you have to bind the XM+ again with the QX7 after you flash the firmware on the XM+?
Yes you do thx
Sooooo, if I understand you correctly, this RX will work with my US Taranis 9D+ (FW v2.0.9)? Sure is a tiny package, and at about $13 USD, very affordable. Cheers.
yep it will work bill cheers
Great .. just found one on eBay for $12.99 USD! Might try changing out the FlySky RX in my F210 grasshopper with this.
yeah that would work! cheers
I have been trolling the net for a few days trying to find out something. No one can give a straight forward answer and I really hope you can. Using the xm+ with a fc that has NO telemetry and NO osd "for example the babyhawk" can this receiver send rssi to the radio?
no it only outputs rssi to a channel on the quad for use with an osd it cannot under any circumstance send it to the taranis. cheers
AndyRC thanks, Cheers
I don't have osd on my quad, how can I have rssi on my taranis?
so I'm getting a taranis qx7 most likely and I want my transmitter to tell me when "telemetry low and telemetry critical" do I need to setup a telemetry port for that and is it worth getting x4r or xsr vs xm+
thats automatic warning on the taranis but it wouldnt happen with the XM+ only the other two
Ok thanks
Mine didnt come with heat shrink, why?
Oh no, mode 1 Taranis :o
Happy 420 Videos!
ah thank you i didnt notice :)
Can you bind it with the fsi6?
yeah... but spek sats are waaay smaller. lol
how lite is that 130 build??? :-)
its about 130 grams... so far but might be heavier than id like
Thats still good tho. I considered getting one but stock weight was a deterrent.. Thanks Andy.
Cheers mate
dare i say planned obsolescence in the multirotor world?
seems that way huh. the old lightbulb conspiracy. lame.
fk that i'm gonna hoard all the brushed motors and FCs!
you could be right there
need to have a warning that radio to xmplus firmware upgrade may just brick your XMPlus turning into a piece of unusable shit.
guess I will try an X4R and hope it works.
if not I will just go back to PPM which hasnt proven to be a confounded pile of shit.
I'm so confused.
what is the issue? cheers
Your tutorial was excellent, its just that for years I've been into rc stuff , cars, truggies, boats, helis, and now quads. I've always bought RTFs that came with a Tx. So I obviously have quite a lot of Txs . I would like to get a Taranis and bind all my aerials to it but for me it's so confusing as what will bind and what won't . I have several eflight helis and quads, a phantom 2 clone and some toy grade tiny whoops. I saw a vid on binding a Taranis to a eachine 010 but was lost in the terminology. I would like to see a detail tutorial explaining the differences between Frsky , flysky, dsm, futaba etc protacols. I really enjoy your vids and learn a lot but all the different terminology tends to scramble my brain. Anyway, keep up the good work. Love the vids.
if your using a taranis u need the frsky rx. if u wish to bind a model with the dsm or dsmx rx then u will need the orange rx module that goes in the back of the taranis the others work with different radios flysky and futaba etc. hope this helps
jon hoyles starting to clear things up. Thx.
your welcome keep watching Andy vids some of the older ones and all will become clear the builds vids are the best