How to Remove and Replace the Timing belt and Water Pump - Mitsubishi 2.4L SOHC Engine PART 3
ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Here is Part 3 of a video guide on how to remove and replace the timing belt, tensioner and water pump on a Mitsubishi 2.4L SOHC Engine. These engines could be found on Eclipse and Galant models as well.
Here are Links to Tools and Parts Used in the Video:
Timing Belt and 3 rollers: amzn.to/2cevcdT
Timing belt tensioner: amzn.to/2d38v9O
water pump: amzn.to/2cZUQV3
Brakleen: amzn.to/2aObgcO
ATD XL Ratcheting Wrenches: amzn.to/2bopGSi
1/2" Impact Gun: amzn.to/2b07qR4
My Aluminum Racing Jack: amzn.to/2b07U9K
Set of 3 Ton Aluminum Racing Jack Stands: amzn.to/2bmVTtT
Easily the most clear and concise video for a timing belt replacement on these 2.4l engines. Much appreciated!
this video is how you know you found a pro. when you see this kind of auto mechanic repair video on the internet youll start to understand the youtube hype from the pros. scotty kilmer make note, never mind, just get off the internet. this is a awesome job. mitsubishi should love you. keep up the great help.
THANK YOU SO MUCH!! Seriously though, thank you for taking the time to do this. My timing belt at a red light this past week, and I had to get my car towed an hour from where I was back to my house. Of course everyone was quoting us a $800-$1200 price to get it fixed, and my dad was convinced he could do it, although he knows nothing about Mitsubishi or timing belt replacements. We did get everything fixed & IT RUNS great now!! There are a couple little things that I had to find out outside of this video - maybe commenting about the major one will get this answered for someone in the future.
I have a 2007 Mitsubishi Eclipse, 4 cylinder 2.4L engine; When you said we need to unscrew the bolt "directly behind the exhaust manifold", we could not figure out which bolt it was in my car; we unscrewed the one we believed it was, but there was absolutely no space to get an allen key in there to check if it was blocked. There was not alot of space between the bolt plug and the exhaust manifold for us to do so; we ended up just doing the other timing test, where the gravity will pull it the right way, regardless if it looks like the white mark is lined up with the arrow (I found it on another video). It's probably just in a slightly different place than this cars' is, which makes perfect sense. So if anyone has this problem too, try doing the gravity trick and see if that helps.
Other than that, these videos helped out so much and saved me alot of time and MONEY! I appreciate it very much!
Thanks for the tip! I'm repairng my eclipse right now
th-cam.com/video/UtTcRru-C-U/w-d-xo.html the video of the gravity trick
Hey! Just wanted to say thank you for these 3 videos. I know you said this shouldn’t be my first timing belt job but my wife’s car is due for maintenance and I’m doing it myself to save the shop charge. Your videos have been incredibly helpful and you explain everything so well. Thanks again!
Pp
This video save me so much $$. My timing belt broke. Did the work my self with the help of this video. Car fired right up after installing a new water pump and timing belts. Running good now. Thanks again!
I bought a 2009 Facebook Marketplace Eclipse special a couple of days ago. The last time I did a timing belt was on a ‘88 Honda Gold Wing using Dad’s shop manual back in the mid 90’s. So needless to say, this is one of the better TH-cam University videos that will help me accomplish this task. The timing belt tensioner has me worried a bit and checking the cam through an access behind the exhaust manifold surprised me. Thank you.
You gave me the exact info I needed. I've done several timing belts, but the special tool needed for that timing belt tensioner is something I don't have so I was worried about this job. You showed me what I needed to know that the tool isn't mandatory. 👍
there are so many videos on this same exact job on this exact engine. However, yours is the first one i found that clearly explained how to install the timing belt easily. great job and thank you for your video.
This will be my first timing belt, and your video was an awesome explanation of what to do. Huge savings!
Changing the water pump was a little more than I was expecting and seemed overwhelming, but your video defiantly put me at ease! thanks for the help!
Haynes would’ve been proud of you…. Or jealous!
Very well made video. Only thing … the bolts on the harmonic balancer … they should be loosened at the same time as the bolts from the waterpump pulley.
But as Mitsubishi’s are a new world to me , this was a great guide !
Absolute legend, thank you for this video, very helpful. Just done timing belt replacements and waterpump on my 2006 Mitsubishi Lancer CH. Took my old man and I a weekend to do but once we watched this it helped us complete it. Thanks again
That was a good ass video.
Well Done and thank you! The suggestion to break loose the water pump bolts was missed by others and a great help to me. I was impressed - thank you again
Great series of videos on this subject. I have the complete set of factory repair manuals for my Lancer and your clips were 4 times more useful than the manuals. Good quality video, just the right pace, each important step was covered, and nice editing to a watchable length. My gratitude to you for taking the time to make the series.
Hey np, glad to hear it was useful to you. Cheers
To mirror what @Dax_Johnson said, there are so many videos on this same exact job on this exact engine. However, yours is the best and most informative! Thanks for the share!
Great vid. Had to try a few times to get tension correct as it was up and down like a brides night dress. All done now, thanks from UK
Great video. But actually it's better if you don't remove the pin on the hydraulic tensioner, and rotate the crankshaft gear a few times until a new alignment, and then just check if the inserted pin still moves freely. If it doesn't, then readjust the tension on the belt until the pin moves freely again (without ever removing it). Then after anew rotation and the 15 minutes if the pin is still moving loose inside the two holes, you're good to go, remove it and that's it. This way you skip the potential removal and new compression of the hydraulic tensioner
That is genius man!! Awesome tip! Thank you!!
I have never done a timing belt. Thanks to these videos I was able to put everything back together. I wasn't the one who took it all off, and I have to be the one who takes it off to be able to put back together. ...thank u
Thanks for having the number one Video about correct Replacement sample in Water Pump and timing Belt correct change out, now your next Video steps should be how to correctly replace cam shaft seal replacement,. Once again thank for the number one video it is my first replacement and your way is very clear. I save the cost to be the boss. D.V.Marable 11-16-2014
Darrell Marable Glad to hear the video saved you money, thanks for watching. cheers
Darrell Marable 5
You're vidoes are absolutely spot on I am doing my girlfriend's water pump and this timing components is all new to me. Thank you for helping us step by step I'm halfway done and know I can finish now.🙏
Thanks for all your time, I wish I could bring my car to your shop.
used these videos to replace my timing belts, pulleys, water pump, and tensioner. now my car is back on the road and running better then ever. the only thing i wish these videos would have included would be putting the serpentine pulleys back on with the torque specs. but awsome video. and when putting the timing belt tensioner back in and releasing the pin. when the pistion is out and touching the bracket as long as you can get the pin back into the first two holes you are good.
I need to replace the crankshaft sensor on my 2001 Mitsubishi Montero Sport, and am having a hard time finding any tutorial videos for tips on how to do it. But I liked this video, it was very informative and easy to understand. Thank you!
Keep the videos flowing. I used this one to change The timing belt on my sons 2007 Mitsubishi eclipse GS worked out just great. I Used your other videos on how to work on air conditioners.
Thank you! I have same Mitsubishi motor, l did the job myself, thanks to your video. you help me a lot Thanks again.
great video nicely done.. best part for me was you used the right amount of words to do the job and no more!! you should run video schools for youtube trainers. Mike from Australia
I was wondering what Ray Romano was doing these days! Really excellent video, details are excellent.
And thanks for showing using a hex key in that hole. The manual says to use a screwdriver. Works fine if you've got the exhaust pipe off, but you've saved me the trouble.
Nice video. Not one of those silent videos I've seen. Nice that he mentions some torque specs. Nobody wants to publish them.
Great video as usual. Lots of stuff driven by this timing belt, the good thing is now manufacturers are going back to timing chains, which is convenient in a typical V6..
Interesting, I didnt know that was happening. Tx for sharing, cheers.
One of the better eng repair vids out there thanks for the attention to the details
I had he'll getting mine in time my belt was old it ran but moter died and know I'm at square one hope it didn't cause damage I've got my new kit in mail it was 159 +39.99 for air fare u have the best video yet I thought u had to have a tool to move tensioner I put the hydraulic tensioner after I put the belt on and I see that you put the tensioner on before you do the belt good job. Man
HI!
Thank you!! I `m going to replace the timing belt on my Galant 2003, I have seen many, many videos, but this is the best:)
Lisa.
thank you, sir and this was my first timing belt replacement job ever
How did it go ?
@@unknownzarby1854 solid i am far more comfortable doing it again
@@221akm I’m doing mine this weekend and I’m really scared
@@unknownzarby1854 dont be
Just take your time and follow the video you will be ok
@@221akm alright thanks
Loved this series of timing belt video. Well, I loved him up until the very end… This is my first time in belt on my 15 minute break right now ha ha I wish me luck
did you have any troubles?
Very good job on the explanation. Very nice job, i learned something, the bolt, 3/8 Allen wrench, the reason for doing this tension, able to pull the allen wrench out, with ease.. thank you sir, thank you..
great video. very helpful, and good camera angles make it easy to follow.
Just a note for other viewers this is very similar to the 94 mitsubishi van if not the same.
Take your time, keep it clean and just follow the vid. Will work everytime.
Cheers mate.
I just did this on a 2011 galant 2.4 (same motor) & replaced the crank shaft sensor, everything looks like the video,so I go to start it & now it wont start. It cranks over & the timing belt turns & the serpentine belts turns also,while trtin to start it. Any idea's or help from anyone?? Thanks in adanvce
I did it! Thank you for sharing the video. On my 2002 Mit Galant, I was able to change the timing belt, water pump and did run into a problem when I reinstalled the crankshaft sensor. Appears I set it wrong and it got shaved when I started the motor.(long story, took a while for me to figure it out) But, once I installed the new sensor, it started and appears to be running good. BTW, I had to reset the check engine light as the old sensor threw a code. Thank goodness for harbor freight, i got the tool that resets the check engine. All is good now, drives nicely, next I will be attempting to change the struts, shocks and brakes! Thank you again
Hey np, glad you found the video useful. gl with your next project. cheers
I did this project yesterday on my 2006 Mitsu Eclipse. Worked like a charm. Great post. If you take your time and follow it step by step you wont have a problem. Hint: buy you a set of the metric ratcheting box end wrenches, you wont be sorry you did, I got the 5 piece set from Harbor Freight, 10, 12 14mm were the most frequently used.
Jeff Hestley Glad you found the video useful. Thanks for the comment. cheers
Jeff Hestley
What a perfect video. I have literature saying to remove the cylinder block plug and put a bolt in it when aligning the oil pump but it doesn't give any reference as to where the plug is located other then a poorly drawn diagram that I mistook for an Allen key plug for the balancer shaft and ended up stripping it and drilling it out. Hopefully no harm done and I can just rethread it and put in a new plug. Very frustrating to say the least. Thank you for the detailed and very easily understanding video but most of all thanks for showing exact location of that plug.
You can use a pair of right angled pointy nosed or better still a pair of right angled circlip pliers in the two holes of the bearing to adjust the tensioner bearing on the main belt instead of a screw driver, works like a charm. Also if you are doing the water pump why not replace the crank shaft and camshaft seals while you are at it especially if the belt is being replaced for the second time. To be real fussy you should also check the hydraulic tensioner by compressing as shown then let it sit for 20 minutes or more without the lock pin (I use a pop Rivet) to see if the little rod comes all the way out under its own steam, this way you can be sure that the tensioner is not weak or it is ok.
I literally did the C-clap part today! And tomorrow I’m going to install the timing belt.
This would be a real treat as a first belt change dealing with that tensioner and such close proximity.
Just did the great wall x240 and this video helped me so much thank you
Thanks, just had to re-due the Oil Shaft Balance Yesterday, after just lining up the Timing makes as some other posts Said (they never mentioned the Balance check)
Thank you very much for this help Mechanic tryed to charge me 2.000$ saying it’s a bent valve but it’s just the timing is off only problem I am having is finding the bolt behind the oil pump but I’m pretty sure I got all the timing marks correct
What a nice video. All the information in a short video. Maravilloso.
that was a very good vedeo but how does the harmonic pulley come off is it bolted to the inside pulley could use some help please
When putting the timing belt on, I left too much slack on the idler pulley side of the belt. That's what caused the sprockets to move off the timing marks. Just make sure the slack on the timing belt is on the auto adjuster side. Thanks again for vid. Been a month and car is still running
This guy is a great mechanic
Your next video should be how much a pain it is to get the water pump pulley back on. I had to make two 6 mm studs about one inch long and slide the pulley on them. Then I snugged two nuts down with my fingers on the studs. This lined the other two holes up and secured the pulley and I was able to start two bolts and then I removed the studs and started my other two bolts. No Fun, hardest part of the job.
thanks its a good video its realy easy whit your description
I have to this job on my car and I believe I can do it the only problem is putting the right amount of pressure on each wheel when tightening the bolts, that's my only concern but then again you have this pin that's inserted and once you take it out it has to go in easily as well. In all accounts wish me luck and if I mess up I'll call you buy you a plane ticket and have you do it for me ....lol. Great video.
i plan on doing this in the summer but on my lancer hahah gonna do it as do it myself project but im kind skeptical
Im gonna do it on 2003 mitsubishi eclipse and im skeptical dont wamma ruin my engine
Doing an 07 eclipse, thanks for the info my guy 👌🏼
Great video, very detailed explanations. Thank you!
On the balance shaft left side does the ajuster idle pully for the small belt goes with the ridge on out side to hold the belt in
this is my first timing belt job on my eclipse 2002 eclipse scary
need to replace the camshaft seal also...
Thanks for this, but I'm new for this, can I know how many hours it might needed?
Hello sir I wanted to know what would happen if you were to crank the engine while having whatever you stuck in the hole @ 5:30? Thanks
Thanks! These videos were a great help!
hope you can make a video replacing head gasket on 2.4l 4G64 engine
Thank you so much for the video
Thanks for mentioning that the plug is a 14mm behind the exhaust pipe. It's not at all clear from the factory manual where that thing is.
Great video! Thanks for the good details
Excellent job and great explanation of how to fix the problem..just subscribed..
I love how noone does an engine in car video. Sure it's easy when the motors on a stand in the car is a different story. Every video I've watched is a motor out of car video. Been dealing with these things for years done it a bunch of times motor in car
this video was super helpful. i had to put it back together on my ute. i bought it off my mate with it in pieces because he tried to replace the water pump. i think im missing one of the long bolts for the pump and he snapped the small one that goes in the little spot. Any ideas on what to do after then get rid of the car
Awesome video my man! I believe you answered my question and problem. Yesterday my 04' Outlander spilled its guts of coolant but it was coming from the left side of the engine, instead of the radiator or reservoir and i couldnt figure it out. Car of course over heated and when i turned on the heater, no heat came out. Eventually after an attempt to limp home with stop-cool-go's ..she finally gave up on me and croaked along with what im guessing was the timing belt. Im sure the water pump died, but i still need to find where it was spraying and leaking from.
damon jackson
Would love for you to explane the oil pump gear better
Hey I enjoy watching your videos. Why cant you line up the timing marks once you take the timing cover off. I'm going to have to watch that oil pump line up part again.
Checking the previous mechanic's work. Can't assume the oil pump is correctly lined up.
Hello my friend, is this the same procedure to change the timing belt of the 4g92 sohc mitsubishi colt engine?
you have a great talent. Thank you.
johnny imagen np, thanks for your comment. cheers
I can’t find the bolt by the exhaust manifold!!!!
can you post on the tension on all the bolts that need tension please,
My kit came with a crankshaft front oil seal and camshaft oil seal. Hoping i can get them in without too much hassle as there is alot of oil leaking from somewhere
Amazing video series.
save me time and money...cheers!
brownhornetseventhre Music to my ears, thanks for watching.
Good Australian morning to you, I would like to add a correction to your video. Around half way around the time you mount the crank shaft timing belt you say the lower pulley is the "oil Pump pulley", incorrect, the oil pump is where the oil filter is, or at least behind the pulley that the smaller timing belt drives. The other side is a counter balance shaft...
Thank you very much you are the Man....
Good job very detail 👍
Can you made a video explaining on the same kind Mitsubishi Outlander how to replace the camshaft oil seal and the crankshaft oil seal. Thanks
thanks helped alot didnt know about that tensoner thanks man
Well done great video 🙏🏻
Have a 2003 Mitsubishi outlander need to replace the camshaft seal. Can I do it with taking it all apart and just zip tying the belt to the cam shalf pulley?
Thank you so much
Nice job, nice detail........thanks a lot ratchets n wrenches
Yaaayyyy thank you sooo much for this video!!!! =)
Do you have or can you make a video dedicated to just checking and diagnosing the sensors that are general to all cars.
You are always the best... thanks a lot sir.
if timing belt breakes while running on the 2.4 will valves get bent. yery good vidios
Raul Z yes they will
If timing belt breaks while running the engine, head to the machine shop and have heads reworked and new valves installed.
I need to replace my crank position sensor. Do I just remove the serpentine belt, crank pulley and the covers?
Nice vid mate.
This is the best video I've found on timing this engine. Good job
Hi i don't know if the two holes on the tensioner pulley are supposed to be facing down... You could use snap ring pliers if you don't have the tool
When i put the screw driver in the tensioner it moves back why is that?
Excellent video. Thank you.
Good Job, thanks
Great Video. How normal is it for the timing belt on the MIVEC Engine to break "at the very top of the engine. I suspect the guy at the shop broke it on purpose. Is it normal for the timing belt to break at the top? It wasn't broken when it went in because the whole engine was spinning. Now just the bottom and the Timing belt was broken on the top.
Quick question, when you took the tension off the belt or the belt off of the camshaft sprocket, did you have to hold the cam sprocket from moving? If so what did you use to do so?
I asked this very same question when I was watching. Also I didn’t notice the timing marks on the upper sprocket.
Thanks for posting, good vid on point
JEnri1984 glad you liked it, cheers.