TDM 900 Fast Idle Plunger service

[@davechambers6647]

Bought my 02 TDM yesterday noted that the fast idle was not working so sorted today. Mandated to get the whole unit off and replaced the screws with 8mm bolts. Couldn't have done it without you. I would not have known anything was amiss. Thank you very much !!!!

[@johnspitfire3421]

Glad I could help.

[@favourites96]

Good video mate, I too had trouble with the two screws holding the complete cold start assembly to the throttle bodies, used a nice sharp centre punch and small hammer and a quick tap had them loose, pretty much came out with fingers after that. Something to bear in mind next time.

[@DixonsVideos]

Thanks for this! Mine was stuck at 2000rpm after warmup. Followed your video and found it was the plunger on mine was seized. Tapped it out cleaned light grease then popped back in. All solved cheers

[@johnspitfire3421]

Glad it could help.

[@willswheels283]

Very Useful info John, thanks for the vid.👍

[@harmenvd]

Problem solved. Thank you!

[@chrisheggie952]

Thanks for that. Strange, I've had one for nineteen years (155,000km) and it's not been an issue thus far. Perhaps my specialist has serviced it for me at the major services though?

[@Darranna]

That’s weird, I did mine today, odd coincidence.

[@saifeddinechihaoui5734]

Thk you so much but can you make à vidéo about the oil sensor

[@johnspitfire3421]

Mine has never gone wrong so sorry I have no need to.