I pulled mine apart and couldn’t figure out how to get battery out. Couldn’t close. Was finally able to with a rolling pin. Now will change battery with knowledge. Thank you.
Is there an internal reset switch that needs to be pushed so that other functions start working. My watch gives certain beeps when the Tide button is pressed and the Temp is at 0 degree C - all this after battery change.
Use kitchen dish cleaning sponge with the sharp side to mask the scratches on the back. It happened to me as well. I also damaged screw holding battery, because none of Philips screwdrivers fit, but I managed to remove it and put it back. Now I am struggling with closing the cover. The watch already started disappointing me since compass doesn't with anymore and the plate with some digits shifted. Great design but I have rather frustrating experience.
I don't think it is possible. How did you close it? I attempted to use clamp with pieces of wood, but it didn't work. I have vice, but I don't want to damage the watch. I don't have press. Even standing on it wasn't enough.
Aliexpress delivery is not to India anymore. So I suggest to get a normal nylon strap and cut the edges based on the size using a sharp object and do heat the edges after cutting it to prevent from getting damaged.
Wish the band replacement was easier. Looks quite simple in the video, but real life those screws are difficult to get out. I've tried wd-40 and still they won't release
@bbrooks442050 yes it was very difficult to remove either. One strap came out easily the another one was very hard though. the difficultly in removing it was edited and removed from the video brother. 😜. I asked an other persons help to hold the watch dial and the screw with a screw driver tightly on a table and I unscrewed it from the other side.
yes correct.. But just in case, this the watch screw tube with pins measures around 24mm in size may be u can try in internet for the delivery options. but I hope if oiled and try to remove with an other persons help u can remove it without breaking it and don't loose the screw.🤝
I just replaced the Battery in my Timex IQ and your video was a great help.
glad it helped
I pulled mine apart and couldn’t figure out how to get battery out. Couldn’t close. Was finally able to with a rolling pin. Now will change battery with knowledge. Thank you.
I'm not able to find t2n721 watch strap anywhere online or offline, can you please share the link for the same
Please share the link of the straps
kindly provide link for this watch strap
I changed the battery but I can't close the back cover. Can you help me please. Thank you so much
Sir where did you buy these straps
Help busy
I was also wondering this.
Is there an internal reset switch that needs to be pushed so that other functions start working. My watch gives certain beeps when the Tide button is pressed and the Temp is at 0 degree C - all this after battery change.
Where to buy lock pins for timex intelligent watch?
Use kitchen dish cleaning sponge with the sharp side to mask the scratches on the back. It happened to me as well. I also damaged screw holding battery, because none of Philips screwdrivers fit, but I managed to remove it and put it back. Now I am struggling with closing the cover. The watch already started disappointing me since compass doesn't with anymore and the plate with some digits shifted. Great design but I have rather frustrating experience.
Thank you!
Great video just what I was looking for
How did you close the back with hands
I don't think it is possible. How did you close it? I attempted to use clamp with pieces of wood, but it didn't work. I have vice, but I don't want to damage the watch. I don't have press. Even standing on it wasn't enough.
Bro you just carved up the back id be pissed,
Nice😊👌
Thank you! Cheers!
Belts buy online website (where)
nice work!
Could you please share me the link of the straps you have shown?? It would be a great help🙏
Aliexpress delivery is not to India anymore.
So I suggest to get a normal nylon strap and cut the edges based on the size using a sharp object and do heat the edges after cutting it to prevent from getting damaged.
My watch second hand stops moving every now and then. Could it be a pcb issue? How much would it cost to repair?
might be your battery. Is it old?
Nice 👍👍👍👍👍
Thanks
Wish the band replacement was easier. Looks quite simple in the video, but real life those screws are difficult to get out. I've tried wd-40 and still they won't release
You need two flat screw 🪛🪛 to release that lock pins..but my problem is where to buy that lock pins in case they break or get lost..
@bbrooks442050 yes it was very difficult to remove either. One strap came out easily the another one was very hard though. the difficultly in removing it was edited and removed from the video brother. 😜. I asked an other persons help to hold the watch dial and the screw with a screw driver tightly on a table and I unscrewed it from the other side.
yes correct..
But just in case, this the watch screw tube with pins measures around 24mm in size may be u can try in internet for the delivery options. but I hope if oiled and try to remove with an other persons help u can remove it without breaking it and don't loose the screw.🤝
Strap is hard to remove. Timex should have used a quick release strap instead of this screw bar.
How not to scratch the crap out of a watch 🙈
Please share the link of the strap