Woodturning: Bearing Replacement & Lathe Maintenance
ฝัง
- เผยแพร่เมื่อ 29 ก.ค. 2024
- Recently, it was brought to my attention by a fellow woodturner that it sounded like my bearings were bad. He has the same lathe as mine and had recently replaced his. This was my first time doing this so it was a huge learning experience. While I had the lathe apart, I figured it was time to do some much needed maintenance. I've also included a couple of links to videos made by Mike Waldt. Mike goes into much greater detail. Please go check out his videos to go deeper.
Mike Waldt's Lathe Maintenance videos:
Wood Turning - Basic Lathe Maintenance - #1 The Tailstock Quill
• Wood Turning - Basic L...
Wood Turning - Basic Lathe Maintenance #2 Bedways, Banjo,Tailstock and Headstock
• Wood Turning - Basic L...
Please subscribe to my channel: / wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: www.wolfridgewoodworking.com/
Facebook: / wolfridgewoodworking
Instagram: / wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Things I used in this project:
Jet 1221VS Lathe: amzn.to/2OdLhCB
Bearing 1 of 2: bit.ly/2Jv34kj
Bearing 2 of 2: bit.ly/2YJkXmd - แนวปฏิบัติและการใช้ชีวิต