@@avman2cl except in Oregon! 😂 and some other states, just thought I’d comment that cause I found out Oregon passed a law that made it impossible to sell cats unless you are the owner or a wholesaler
@@jaygatsby3007 anyone else sucks. Hard eggs. The blade keeps the dang thing straight. If you fuck up such a cut, you’re either fucked up, or a lazy POS.
@@joshbousche8669 nah he just didn’t cut through it the first time, leaving a small mitre groove. Not cut all the way, but maybe a half mm off that groove
The Bosch heavy duty metal blades are the best. I spent 40 bucks on a diamond cutting blade, got through 1 cut before it completely lost all its teeth, went and bought the 5 pack of the Bosch for like 25 bucks. Finished breaking down a trailer frame with just one of those blades, I still have them to this day and use them all the time. I still use the one that I used on the trailer
Im not completely sure my town didn't have the Diablo blades. But they are pretty much the same company, one owns the other, the one I tried was a diamond tipped Lenox blade I believe, I would have to look at it I still have the old blade somewhere
@Ban this youtube damn that’s awesome…these blades were made to make the job easy. Pretty affordable too which makes it really worth the money (in my opinion)
I’m guessing about 3 we use those at the job and once we had to demo large 6 and 8inch black iron pipe that had to be 1/4 or1/2 thick and it did about 6 of them before it was time effective to switch blades 😂😁
@@TheGreatWhiteHope-pb3qr that's why he's the foreman and not out there working with you still. He cant work but he sure can talk. Definitely talked his way into foreman if he cant use a sawzall 😂
Lube??? Should I take the I-beam to dinner and drinks first...maybe some foreplay??....or should I just "accidentally" knock on her back door and see if she answers??? 🤣😂🤣😂
@fatjeezussouthtexasoutdoor5244 dumbest reply every you can tell this kid never worked a hard day in his life let alone in a metal fabrication place lube is also a term for wd-40 or sometype of tap liquid to keep the blade cool while cutting or bit while tapping but you'd never know that
I had to cut a long exhaust box in 3 pieces, because it was thick steel for radiation shielding the box was 1” thick. It took 6 of those Diablo blades.
Diablo is definitely my go-to blades for pretty much anything whether it be abrasive cutting wheels for my grinder or saw blades for my circular saw personally I would have wanted to use a longer blade for this test but pretty much the only thing I can fault you on is not using some cutting fluid just spraying that fucker with WD-40 while you're doing that would help a lot
a lot of blades could probably do that. the insane thing about diablo blades is whatever black magic alloy they use holds an edge WAY longer. their blades tend to be thicker too. one of the few brands that lives up to the hype
These blades work very well. Diablo have released an AMPED range of metal cutting blades which are even better. Blades will last a lot longer if you use cutting oil and don't run the recip saw at full speed. A variable speed corded recip saw is the way to go. And yes, it is a H Beam rather than an I Beam. But that makes the demo even better because H Beams are usually stronger and harder to cut through.
So are they really that good if your burning threw them and using multiple one cut? Those blades are not cheap so sounds like an ineffective expensive way to make 1 cut. At the point pull out the angle grinder with the right disks. You might even be able to do it with one if your cutting straight
the beam icon on all metal cutting blades has it. Diablo makes the best blades and has done so for decades. You could have over half the teeth missing and still cuts good.
Not gonna lie that is impressive. Have been using Irwin 12mm wood augers to drill timber house posts for the past 18 years and have recently swapped to Diablo 12mm wood augers and so far quite happy with them.
I've been using Diablo blades lately. I don't know how they do it, but I haven't had to replace one yet. Been on for 4 months or so. Weekly use at least.
Used this blade to cut a pillow block bearing outer shell in half. The blade was no good after, but the fact that it even survived that long was impressive.
I still would prefer my 7 inch grinder with a cutoff wheel. Tbh the baur 7 inch is pretty badass and you can get .045 disks for a 7 but not a 9. Sure 7 would fit on a 9 but the 7 is a lot more compact and less heavy. Just be careful not to bend those disks when cutting or they explode haha
just got these at work, first blade cut through 2" brass shafts around 30 times, a few brass brackets, few hundred screws, and a 1 1/2 inch stainless shaft where it snapped in half, the second one did half a stainless shaft and still worked just as good, started cutting thin walled copper pipe 2 and 3 inch, cut like butter a few times then just stopped cutting, all the teeth were chipped. seems hit and miss but the stainless wasnt smart
I always used Diablo blades but these new milwaukee blades torch nitrous carbide are no joke and seem to me to cut faster and last just as many cuts or more than the Diablo blades. I watched some test and it backed it up, Indeed they do cut faster.
Ranked best blade of all time by catalytic converter thieves.
Doesn't work well in thin steel.
@@avman2cl idk, cat's are fairly thick, I think this would zap off a cat, idk if its the quickest blade but.
Wait, why we helping would be thieves lol
@@DrMurdercock they always find a way.
@@avman2cl except in Oregon! 😂 and some other states, just thought I’d comment that cause I found out Oregon passed a law that made it impossible to sell cats unless you are the owner or a wholesaler
@@Steve.._. wow, so lets make murder illegal too. That solves the homicide problem.
I've been a contractor for almost four decades and have used a lot of different blades but Diablo is always my go-to blade they are awesome
Spyder sells some products Diablo doesn’t in stores. (Always order online) but still Diablo is best of the best imo
In my experience lennox blades seem to be the best.
Diablo hands down everytime
Cheap and efficient.
Learned this from project farm lol
“Never trust a factory end.”
I was thinking the same thing lol
Lmaooo I’ve been seeing those video everywhere recently haha
@Brantley Combs HAHAHAHAHAH I KNOW RIGHT ISNT THAT CRAZY?? HAHAHA
My first thought xD glad I’m not alone.
@@shanemoorehead1886 I can’t tell if this is genuine or if that’s sarcasm
Bro, props on that ridiculously clean cut.
??? He cut the bottom right right twice
@@joshbousche8669and that was all the rest was done fairly well compared to what anyone else could've done
Can't trust that factory edge
@@jaygatsby3007 anyone else sucks. Hard eggs. The blade keeps the dang thing straight. If you fuck up such a cut, you’re either fucked up, or a lazy POS.
@@joshbousche8669 nah he just didn’t cut through it the first time, leaving a small mitre groove. Not cut all the way, but maybe a half mm off that groove
That’s insane. Mafia wished they had these to disassemble bodies back in the day. 😂
It’s a carbide blade. There’s nothing insane about it. 🙄
@@jman0870 I think hes talking about the reciprocating saw, since bodies arent metal
Cement shoes into a lake worked fine
@@felixuchies4688I think reciprocating electric saws have been around since before 1970
The fact ppl in this thread say reciprocating saw instead of Sawzall, hurts my soul.
Crazy what can happen when you know how to use a sawzall! Ive been wanting to see a sawzall hack through an I beam, so thank you
The Bosch heavy duty metal blades are the best. I spent 40 bucks on a diamond cutting blade, got through 1 cut before it completely lost all its teeth, went and bought the 5 pack of the Bosch for like 25 bucks. Finished breaking down a trailer frame with just one of those blades, I still have them to this day and use them all the time. I still use the one that I used on the trailer
Bosch owns Diablo.
You remind me of @grandthumb 's 22LR man!
Do you think they are better than Diablo blades?
Im not completely sure my town didn't have the Diablo blades. But they are pretty much the same company, one owns the other, the one I tried was a diamond tipped Lenox blade I believe, I would have to look at it I still have the old blade somewhere
Bosch makes good stuff 👍
Diablo blades are next level…been my go to ever since i heard about them
@Ban this youtube damn that’s awesome…these blades were made to make the job easy. Pretty affordable too which makes it really worth the money (in my opinion)
I like these videos where they actually test the product no fake shit no precuts just you showing if it says what it can do
Nice cut, good technique. Those carbide blades are awesome.
That's insane it's nice to see tools being made to last finally
Diablo is the shit! Sold them without complaint,used them for any kind of cutting flawless!
That's some solid engineering and blade, how many cuts can it make that quickly would be the question.
I’m guessing about 3 we use those at the job and once we had to demo large 6 and 8inch black iron pipe that had to be 1/4 or1/2 thick and it did about 6 of them before it was time effective to switch blades 😂😁
My foreman only gets one cut out of any sawzall blade before it turns into a piece of bacon!
Yall are using the blades wrong. Use lube if you can. Keep it cool. You'll get more cuts before they shit the bed
@@TheGreatWhiteHope-pb3qr that's why he's the foreman and not out there working with you still. He cant work but he sure can talk. Definitely talked his way into foreman if he cant use a sawzall 😂
1/2 in pipe? sure bud.
It'll work better if you also lube the metal at the same time.
Spit on it😂
Lube??? Should I take the I-beam to dinner and drinks first...maybe some foreplay??....or should I just "accidentally" knock on her back door and see if she answers??? 🤣😂🤣😂
@fatjeezussouthtexasoutdoor5244 dumbest reply every you can tell this kid never worked a hard day in his life let alone in a metal fabrication place lube is also a term for wd-40 or sometype of tap liquid to keep the blade cool while cutting or bit while tapping but you'd never know that
I had to cut a long exhaust box in 3 pieces, because it was thick steel for radiation shielding the box was 1” thick. It took 6 of those Diablo blades.
Then you used them wrong.
Sounds like you should have used a torch.
Those carbide blades are unbeatable in thick steel, especially old galvanized pipe.
Wow this would be a great commercial for them. Outstanding. I always pick up their blades at HD.
They work very well on flesh. Cuts bone quite well too.
ya because bones are even tougher than 1/4 in. steel
Diablo is definitely my go-to blades for pretty much anything whether it be abrasive cutting wheels for my grinder or saw blades for my circular saw personally I would have wanted to use a longer blade for this test but pretty much the only thing I can fault you on is not using some cutting fluid just spraying that fucker with WD-40 while you're doing that would help a lot
WOW
Not bad
Quick-ish
Nice blade
That’s a pretty durable blade. I will buy those from now on!
Hell yea you can. Best blades you can get
I use those, they work great!
Indeed, the skillsaw blades are also the best 👌🏻
I use the same blade to cut dampers out of fireplaces. The cast is typically 1/4" thick and Diablo is my go to. 🤙
Wow......gotta love the diablos best in the buzinezz
a lot of blades could probably do that. the insane thing about diablo blades is whatever black magic alloy they use holds an edge WAY longer. their blades tend to be thicker too. one of the few brands that lives up to the hype
That blade is a freaking beast , it cut through that beam like butter!!
Honestly as a contractor these carbide teeth blades are a life and time saver👌🏻
I was noth expecting that. Incredible but also scary.
Im a plumber i cut cast iron like butter with this blades another level of cutting blades great jobs done milwaukee 👍👍
That's usually when you bust out the oxyacetylene torch, but man, that Diablo blade did a fantastic job.
Wow. Under 5 mins. That's why I love diablo blades
Two minutes and 30 seconds but i didn't see it slow down once in terms of pace. Pretty impressive
I've done similar shit with my hand, it was painful 😅
Me too 😉
Free advertising for a company that actually deserves it. Sweet
Very nice I'll have to pick some up, I've never put much thought into my sawza but my cheap blades are probably why I dislike using it lmao
Try Milwaukee Axe or demo blades and their Torch blades. They will change your mind about a Sawzall.
Blades are great, it's just the sawzall that got me every time
I love these blades for exhaust work especially on stainless systems. A little wd-40 with them makes them last longer and cut better
^^Darn straight! Lube those blades with cutting oil or something and theyre going to out last any angle grinder blade ever.
Impressive
That’s actually really impressive and fast
I've cut up like 5 or6 80's model suburbans with one that's cutting them in half frame and all diablos are very good
These blades work very well. Diablo have released an AMPED range of metal cutting blades which are even better. Blades will last a lot longer if you use cutting oil and don't run the recip saw at full speed. A variable speed corded recip saw is the way to go.
And yes, it is a H Beam rather than an I Beam. But that makes the demo even better because H Beams are usually stronger and harder to cut through.
When the product actually does what it says it can:
truth in advertising
Ive cut thru massive beams with these blades. You may need a few but itll do the trick
So are they really that good if your burning threw them and using multiple one cut? Those blades are not cheap so sounds like an ineffective expensive way to make 1 cut. At the point pull out the angle grinder with the right disks. You might even be able to do it with one if your cutting straight
Diablo blades are the best ive ever used
Love me some Diablo blades!!
TooShay.. earned a sub and thumbsup
the beam icon on all metal cutting blades has it. Diablo makes the best blades and has done so for decades. You could have over half the teeth missing and still cuts good.
God I’m glad I got a plasma cutter. I don’t miss those days.
I needed this yesterday
Not gonna lie that is impressive. Have been using Irwin 12mm wood augers to drill timber house posts for the past 18 years and have recently swapped to Diablo 12mm wood augers and so far quite happy with them.
I got a 6 pack of those like 4 years ago and still have 2 unused. Only 1 has dulled out so far, the other 3 are still sharp
Well, it is rated for up to 5/16ths so there's no real surprise there. Now try it on something 1/2" or 3/8ths
We use them in the fire service. Good blades.
I've been using Diablo blades lately. I don't know how they do it, but I haven't had to replace one yet. Been on for 4 months or so. Weekly use at least.
Diablo makes great products
Used this blade to cut a pillow block bearing outer shell in half. The blade was no good after, but the fact that it even survived that long was impressive.
All I can think is how many abrasive cut-off disks would that have taken, and 35 minutes of your time. That blade is wicked!
Every Diablo blade I've ever used is completely legit
4 seconds in and as expected you are using an ILLOGICAL amount of force on that metal piece
I'm actually quite impressed
Setting the boot on the sawzall is everything when you cut with it!
Great as long as that's your only cut! Yay
I still would prefer my 7 inch grinder with a cutoff wheel. Tbh the baur 7 inch is pretty badass and you can get .045 disks for a 7 but not a 9. Sure 7 would fit on a 9 but the 7 is a lot more compact and less heavy. Just be careful not to bend those disks when cutting or they explode haha
Diablo doesn't F* around.. hands down best in the game
One of those “Yes, but why?” Cool test, showed it can do it.
I'm impressed!
Wow, didn’t expect that to work as well as it did
That was damn nice clean cut
Most people would go for a disc grinder but i now know how its done!
Saw saws are amazing
Ok that’s impressive
Very
Dude has some saw skills, good cut
I have always bought them. They do better than most.
i love thier blades
I always put some type of oil or lubricant on my work when I’m cutting it makes the blade last longer and makes it stay cool
Nice to see it worked as advertised.
Diablo for life!
I have cut through 1-3/4" B7 stud bolts with them, just slow your speed down so you don't overheat the blade. And use cutting oil to cool the metal.
They are the best blades i've ever used for just about everything
We use them to cut up scaffolding that’s been exposed to chemicals and are rusted bad. They work Great!!!
just got these at work, first blade cut through 2" brass shafts around 30 times, a few brass brackets, few hundred screws, and a 1 1/2 inch stainless shaft where it snapped in half, the second one did half a stainless shaft and still worked just as good, started cutting thin walled copper pipe 2 and 3 inch, cut like butter a few times then just stopped cutting, all the teeth were chipped. seems hit and miss but the stainless wasnt smart
That’s pretty fling good
Crazy 🤯 always looked at it never thought someone might try it. Wow
That was legit crazy
Wow. That is damn impressive.
Love them pretty solid too don’t bend as easy as some competitors
I'm glad knowing I own both that saw and those blades lol
Use the one step down ones for rebar and everything else. Cuts rebar like butter
Without even watching the rest. Yes, yes it will especially on a Milwaukee ive done it numerous times
DAYUM! We've been enjoying our sawzall for house demo with generic demo blades. I'm gonna get some Diablos!
Used it to cut through my old cast iron plumbing. Zipped right through it
I used one too they’re great, but the second and third cuts on cast iron are tough eventually you just grab the grinder and cutting wheel
Those are the best blades. Especially on cast
These blades really are an amazing innovation for the trades. I cut cast iron for plumbing with them all the time
Did not expect it to do it!
I always used Diablo blades but these new milwaukee blades torch nitrous carbide are no joke and seem to me to cut faster and last just as many cuts or more than the Diablo blades.
I watched some test and it backed it up, Indeed they do cut faster.
This blades are the best.
That blades crazy