if everyone knew the company would stop production | angle grinder
ฝัง
- เผยแพร่เมื่อ 7 มิ.ย. 2023
- #anglegrinder #grinder #grinding #handtools #handyman #welder #drill #lathe #welding #steel #handcraft #handmade #machine #machinetool #arcwelding #weldingtipsandtricks #weldingtips #iron #homemade #diy #diycrafts
very few discuss the secrets of hand grinding
There's 7 minutes and 32 seconds of my life I'm never getting back
Punkt eins ist das nicht erlaubt, Punkt zwei Lebensgefährlich
Das Blech ist nicht mal Gehärtet das heißt es verbiegt sich von selbst
Thanks for the heads up
😂😂😂
I skipped to the end but that is 30 seconds I will never get back.
If you feel like having too many spare fingers, eyes and other body parts, just go ahead and do what you have just seen. Otherwise, do NOT use a cutting disc for grinding and wear gloves while your hands come close to a rotating power tool.
Absolutely true
I has a 4" round saw blead but I never dare to use it.
Wow I didn't think about the gloves but yes
Yes.... except for the gloves...... gloves and spinning shit don't mix!
@@cprllc4246 when I was yong , I worked in tube and tire factory ,work in roller machine , it was very hot and sticky ,but manager not allow to use hand glove.
Gloves will pull your hand to spinning dish .
Wow another perfectly safe finger removal tool.
😂😂😂
😂😂😂
In the blink of an eye... don´t forget safety glasses. :D
Used this tip but didn’t have any scrap plate steel laying around so I grabbed a sharpie and cut a 4 inch hole out of the center of my Viking refrigerator. My wife isn’t speaking to me and we can’t keep perishable goods anymore but I have this killer stainless grinding disc now. I was cutting some 1/4” plywood with it in the garage earlier!
Fkn outstanding upload thanks 🙏
Lol
Ni siquiera es inoxidable, es lámina galvanizada 😂😂
Underrated comment! 🤣🤣🤣
Probably costs more than buying actual cutting discs 😂
Time is worth more than money, and that's just for starters 😂
😂😂😂😂
Not only does it cost more, it's more likely to fail spectacularly or wear out extremely fast, all it's made from is from soft sheet.
He used a cutoff wheel to make his cutoff wheel. Which came first chicken or the egg lol
And its not even hardened haha. Its jjust regular steel. I really dont get the point. But you get millions of clicks for this crap?
I had a lot of old pipes and rebar to cut up and from what I read th-cam.com/users/postUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.
Jamás usen discos que no fueron diseñados para esa máquina, discos de corte para madera, no deben ser usadas en amoladoras o radiales, peligro para la integridad física
No entiendo .Cómo pueden ? Aceptar semejante locura .es de una ignorancia supina !!!
Benar sekali kawan, itu ide bodoh yg pernah dibuat..
Tengo varias personas conocidas, que se accidentaron por usar la amoladora con estos discos para madera, para eso está la circular amigo, cada herramienta para su trabajo.
Completamente de acuerdo irresposabilidad absoluta utilizar este tipo de utillaje si un minimo de garantias de seguridad!!!Las compañias de seguros por accidente,no se responsabilizan de estas herramientas caseras!!
En primer lugar ese disco no es para esmeril angular, es para circular manual y en segundo o diria tambien primero los discos dentados llevan un proceso de templado con aleaciones de metal que permiten darle un grado de resistencia mucho mejor que el fierro cumun que esta usando esa persona que miedo ese disco votando dientes ojala se ponga gafas y eso que ni asi pues se puede incrustar en las mismas y llegar a las vistas y jummm😮
Existe um motivo mortal para as empresas pararem de fabricar e ser proibido o uso em empresas,nunca usem esse tipo de disco para madeira nesse modelo de máquina,pode custar um membro importante do corpo e até mesmo a vida
Stop being so safe. You not taking time to live.
“He that seeks, to save his life, will lose it”
Balance, of course
@@justintothetruth6843выколи себе глаза - наполни жизнь впечатлениями 😂😂😂😂😂
@@justintothetruth6843"de un burro solo se esperan paradas"
A serra mármore, ou Makita, com um disco para madeira, é muito melhor.
Do that if your safety doesn’t mean anything to you. But if you care about your safety you will choose a different way to cut wood. There are many ways to do that, using an angle grinder with a certified cutting disc is one of most dangerous, doing it with something you did with your hands is a really Darwin Award!
This video its making stupide people,.. Its danggers to use..
👍
you're absolutely right 👍 saya sependapat dgn anda ( thats video was very dangerous )
High end discs like makita cost $2
This takes at least 15 minutes
Is your time worth less than $8 an hour?
@@chriscolameco6850 The real question should be: does your life worth less than 2$? When you make an evaluation you need to consider the risks too. To make a balance between cost and production is not enough when your life is involved.
I couldn’t block this channel fast enough!
Aqqq❤ AW
Aqqq❤ AW
CARA engenhoso, + prefiro comprar 1 original além d barato é muito + pratico e seguro; + PARABÉNS pela engenhosa ideia. 👏👏👏👏👏👏
I will stick to my less deadly circular saw.
Muy mala idea ahorrar un poco de dinero y arriesgar a perder un ojo inclusive la vida espero que nadie lo haga
Los accesorios para un Esmeril están perfectamente fabricados y probados para que una herramienta que gira a 11000 rpm
Resista y no creo que un pedazo de metal otorgue esa seguridad
A veces las buenas ideas se transforman en malas cuando se pone en riesgo tu integridad física y la de los demás
.
Te doy un like
solo por tener las ganas de inventar.
Toda la razón mi estimado !!
An interesting exercise in how to make a wood cutting disc if all else fails and there’s nothing within miles to cut with….but even then it just means you came unprepared to the job site.
Oscillating multi tools, jig saws, cut off 3” disc saws, circular saws….hell even a coping blade I was use before this.
Excellent! So much effort to produce a blade that cuts 1/4 ply. At least it cuts at nearly half the pace of a handsaw and gives off a lovely woodsmoke aroma😅
😂
,🤣🤣🤣🤣🤣
you can use this for emergency situation, if no store is open. but for sure it will last unlike the cutting wheel. not to mention the safe risk that you will going to encounter.
Que gambiarra trabalhosa
É melhor sem dúvida uma ferramenta industrializada muito mais segura
У этого парня всё самодельное даже перчатки😂
😂😂😂😂😂
І мозги тоже
Recently I did a home improvement and used a metal cutting disc to cut plywood. My wife thought I was firing up the BBQ as there was a lot of smoke but no roast on the fire unfortunately. The metal cutting disc cutting through plywood created a hell allot of smoke. Thanks for the hack. I'll try it asap. Cheers....
Doesn't come with frequent flyer miles at the local emergency room? Here's a thought, I'll use my table saw.
If he is lucky to land there and not in the morgue
Next video will be at the hospital's intensive care unit😂😂😂😂....
😂
😂😂😂
Pratiquement une excellente idée, mais techniquement elle n'est pas adaptée car la vitesse de rotation de la machine n'est pas compatible avec la coupe du bois.
Certaines meuleuse on des vitesses variable.
Writing his death warrant
No one would do such crazy things on a super fast motor in this age where everything is cheap. It is painful that so many people follow a person who publishes such a video
J'ai franchement du mal à croire que quelqu'un de sensé puisse reproduire cela.
You cannot be serious I don’t think any company will be stopping production any time soon in favour of this 😱😱
La invención de la rueda. Ese disco hace mucho rato ya lo venden y de excelente calidad. Igual que las ruedas.
Yes
Pero este disco no es para esa herramienta. Es un peligroo
!!
Eres de Cuba, Perú o algún hoyo así?
If you think spending €3 on a disc is too much but also think spending half an hour making a tool that won’t last 3 minutes, doesn’t cut properly and will grenade itself because of blunt cutting faces then this guys got a blinding invention for you.
Fuel to get to the store their and back taxes Wear & Tear on your vehicle it adds up especially if your off grid in the back country!
I would rather spend $3 then need stitches and customers get pissed if you charge $150 to make these
I personally wouldn’t trust this wheel but he does and it’s actually a good little saw blade for thin material.K personally have an iron wheel that made for cutting steel that I’d rather use over something like this.At least I’d have a lawsuit to pay for plastic surgery if anything went wrong 😂…but seriously I can’t hate on the man for being creative.
Dangerous one. It cuts slow. I won't do that. Go for thicker MDF and that will turn into flying knife 💀💀💀
Duh, that's why everyone has agreed this was designed to cut wood, not mdf, not metal, just ply wood. It works extremely well for what he intended it for. It's those who don't know how to use the tool properly, who end up cutting something with a wrong disc, it binding up, & then causing injury. If you've never studied using the tool, don't use it.
@@RandallHirt I use different kind of tools and have experimented different kind of cutting tools too. I'm a doer not much talking machine. I commented on this just because there is a very high chance it's gonna fail.
Mata gerinda yang dipasarkan tentunya sudah dirancang sedemikian rupa kualitas dan safety nya dan tentu cara penggunaanya sesuai standar pakai.
Si los discos para cortar madera son un peligro. Ahora como será uno hecho por uno mismo sin ninguna calidad de materiales e ingeniería. 😂
Ya cpt tumpul kalau bahanya dari plat bukan baja, mending pakai bekas circle keramik sisi lingkar luarnya sdh lebih tebal untuk bagian geriginya,😊
It's safer to use the proper tool, it's called a saw, this is beyond dangerous.
7:19 seht her, was für ein perfekter Sägeschnitt. Ohne diese Erfindung wäre so etwas nicht möglich gewesen
Is that circular saw you made balanced? If not how to balance that circular blade?
Allez chez Castorama vous verrez c'est très abordable...
Este señor quizas no le enseñaron que los discos de amoladoras de este tipo son fabricados y probados para girar a 13,000 rpm sin rompenserse, y que las amoladoras giran a 11,000 rpm. Este "invento" no creo que haya sido probado que resista, sin pensar en el riesgo de perder un ojo si se rompe. Un pedazo de ese material disparado a esa velocidad, es un daño seguro. Mejor comprar uno de fabrica es mucho mas seguro.
esos dientes salen disparados como un proyectil en cualquier momento
Repasando los videos de tu canal, veo que tienes algunos que realmente son innovadores y útiles, pero este, sinceramente es peligroso e irresponsable por el daño que puede causar. Una amoladora ya de por sí és una herramienta de las más peligrosas, de las que más accidentes causa. Si además modificamos la herramienta o sus accesorios se convierte en una ruleta rusa de la que, seguro saldrás perdiendo.
Et probablement que ce genre " d'innovateurs " ne portent pas d'éléments de sécurité tels que gants et lunettes de protection, à constater d'ailleurs que sa meuleuse ne comporte pas de carter de sécurité pourtant obligatoire autour du disque, nous avons à faire à une personne qui est inconsciente du danger qu'elle court mais qui de plus expose d'autres personnes qui pourraient se trouver à proximité et pourraient être atteintes par un éclat de métal, au regard de la sécurité cette personne est à bannir d'un chantier.
I'd use it... Pretty well made. Not anymore dangerous than a cutting disc, probably less likely to shatter but would mind them teeth snapping
Many videos on TH-cam show life-threatening "strokes of genius", such as "show welding", where the material is only spotted because it looks great, but no fusion takes place.
Or the genius who lifts his self-built 600kg welding table with a jack and then it almost kills him.
In many videos there should be an insert saying "Do not copy, danger to life".
This also applies to this stroke of genius with the homemade saw disc, short cant or hard material and the stuff flies around your ears in the truest sense of the word.
How is your welding example life threatening
За заморочку конечно респект но диск специально для ушм стоит 200 рублей и в сто раз безопаснее, а этот кустарь если закусит, ещё и пальцы отлетят, всем добра
От
My dude tricks all 3.2 million of us into watching him make a grinding disk with a grinding disk. Genius!
Grinding disk? No, that's a saw blade.
Did anyone else think that the thumbnail was implying that he was just gonna put a square piece of metal on and use it, and was slightly disappointed when you realized he had slightly more common sense than that? Just me?
me considero experto trabajando en ese tipo de pulidora,su velocidad de rotación es más de 10.000 rpm , siempre la manejo solo con una mano algo que no aconsejo si no tiene mucha fuerza en su mano y destreza para evitar que si rompe un disco no te cause lesiones,hace años vi un disco de corté de madera para ese tipo de maquina, tenía un empleado el cual siempre le prohíbi que usará la máquina así fuese con disco de pulir,y menos con disco de cortar metal,un día me dijo que había comprado una máquina de esas un disco para corte de madera, preocupado le dije no vayas a usar ese disco en una máquina que gira a esa velocidad, respondió que el tenía también mucha fuerza en su mano ya que era cinturón negro 8 dan en karate y pelea de contacto,el resultado de no escucharme fueron cuatro dedos cortados hasta el hueso,, múltiples cirugías por cinco años,aun no recupero bien su agarre con esa mano, perdió su carrera de fullcontac , ahora estoy bien un video de un ignorante que explica como cortar dedos, rostro y posiblemente la muerte todo por likes?
.... Or maybe just use a box cutter to get through that tough 1/4" ply, without taking 20 minutes to make whatever that is.
1/8" lol
Came to TH-cam to look for sketchy diy tips, was not disappointed.
Your background music is so refreshing brother.❤
Thank you so much for sharing this valuable knowledge.
Thanks for this and i,m 60years see it for the first time going to use it ❤
Why didn't you draw the outer circle when drawing the middle circle on the iron sheet? To draw the outer circle, do you have to fix the iron sheet on the milling machine and then draw a line around it?!
The way he did it, accomplished 2 details:
1.) That the outer disc is more certainly equal distant to the center of the circle, thereby will be more reliable & smooth cutting.
2.) By marking the second circle the way he did, also shortens the length of the blade, taking out a lot of flimsiness, play, or any possible wobble.
@@RandallHirt Thank you for your guidance. ❤
Buying a circular saw blade would be much cheaper and easier, anyway thanks for the upload.🙂
Easier? Yes
Cheaper? No
More useful and safe absolutely? Yes
Saw blade rotates at half the speed of an angle grinder.I would never attempt a stupid practise like that
@@martintheron1386for what tool are they made wood 115mm discs?
Danger:le disque recommandé est conçu en respectant les paramètres de la vitesse de rotation de la meule le degré de la chaleure......
Maaf mas, kalau untuk potong triplek bahkan multiplek, pakai mata potong besi juga kuat mas 🙏
Tapi tetap salut dengan kreativitasnya 👍
Si los fabricantes de amoladoras recomiendan no comprar discos de corte para madera por qué es mortal y peligroso y tu enseñando a la gente a suicidarse con ese invento 😅😅
só comprar o disco próprio para madeira, é o disco diamantado da Bosch.
Y tambien debe usar la herramienta adecuada. Ese disco no debe ser usado con esa herramienta
Immortal cutting discs..😅
Senhor..... tenho medo de esmerilhadeira. Jamais colocaria algo com dentes nela.
Lo más tonto y peligroso habiendo discos para cortar madera con amoladora
Para salir de una emergencia está bien, en algunas ocasiones trabajo en lugares muy apartados de una tienda pero es de alto riesgo trabajarlo. También hay discos para esmeril angular o amoladora y corta muy bien la madera. Está hecho de widia o carburo de wolframio o tugsteno.😊
Peligroso 😊
Jamás usar disco de corte para madera en una amoladora que gira a 10mil revoluciones. Es tan peligroso como un mono con una ametralladora
They sell 4" carbide tipped blades for cheap. This takes longer than its worth
Fuaa hermanito... capaz en tu país salga caro un disco para madera... pero con todo el trabajo que paso haciéndolo prefiero ir y comprar uno 😂😂
Tienen razon es muy peligroso, un tiempo usé amoladora con disco para madera y me accidenté tengo tres dedos de los pies reconstruidos
🤣🤣🤣
De los pies?????
Wood cutting disks are usually for circular saw usage, table saws or cutting off saws, but definitely not for angle grinders. Usually, angle grinder disks rotate at a linear speed of 80 m/s, while tools that are designed for cutting wood rotate slower, and there's definitely a reason to this. There so many other reasons why not to do a homemade blade, such as accuracy
That's about 262 ft/s or 179 mph for those who love freedom, guns, and getting laid; oh and who don't mind a little unnecessary math, well actually a shit load of unnecessary math, but it's easy.
Nothing like spending probably $280 labor to make a $2 disc.
The instrumental was fire though. lol
You sir are a very efficient craft an with just a few tools🤪🇨🇱
Maybe as a very last resort....but too much trouble otherwise. A old saw blade works.
These times we are in many of us don't have access to run and go pick up every single thing we need! Making it happen with what you got is how most of us have to get by! Awesome job on making what you needed to get by!
That’s a cute story and all but this would be like not having a back scratcher so improvising by using a cottonmouth. Using anything but abrasives on an angle grinder is not something you should do. It aint “if it fks you up” it’s “when it fks you up.” Throw wood in the mix and it wont take long. He also isn’t very experienced with a grinder, you either, so i give it 5-10 min. I know this to be a fact… because if either of you had many miles on one you would no EXACTLY why this is a bad idea regardless of the situation.
@@robbiewilliamson357yea. Its just sad how these clwn comments everywhere. I understand it when company owners do it for greed and spread lies. But when people actually support such stuff with cute little stories like "we have to get by somehow" its cringe. Darwin award incoming
En cas extrême peut être, mais que je sache il y tout de même beaucoup de distributeurs qui vendent ces accessoires à des prix dérisoires, là encore on reste dans le domaine bricolo bricolette, c'est une expression très connue sur les chantiers,le gars va mettre 2 heures pour fabriquer un " outil "qui va lui servir 10 mn, c'est sûr que son patron ne sera pas nécessairement content de l'apprendre.
Making what happen? Taking 5 mins to make 1 cut in 1/8" ply?
You're clearly an expert at all things "angle grinder," thanks again with giving your two cents.
Sangat bermanfaat sekali ilmunya bosskuh 👍
This brings back memories of life without Amazon
Parabéns!!
as chances de um pedaço voar e acertar seu pescoço são maiores. 😢
um disco de fábrica já são projetados para q diminua o risco de quebras.
Melhor comprar um disco de madeira!
Hola,solo te falta el proceso de endurecimiento del metal y tu disco te duraria mucho mas tiempo
Vous n'avez pas dû vous servir beaucoup de disques de tronçonnage si non il va de soi que vous ne sortiriez pas de pareils énormités
Лучше чем я делаю из эпоксидки (по краям с гвоздями или саморезами). Почему не сделал ей разводкой развод, как у любой пилы? ЗАБЫЛ! Эх, ты...
The production company has put a reward for your head!😂
ROFL 🤣
Это правильно.
I think if i did this, i would use a more precise measure for everything. A lathe to get it perfect, a mill to perfectly grind in the teeth at the perfect angles, and specific steel quality to fashion the blade… something that would cut or properly resist the rotations and stresses of cutting and the temperatures it generates. What you saw here… probably works, in the same way my dad built a shed. It leaned, it blew over every winter, and the walls didnt match. It kept things dry sometimes, but failed often in spectacular ways. With a blade like this, spinning at 18-30k rpm, id just rather not and pay $10 for a pack of 3 from HD
K
II o😂 4:53 😂
Con las herramientas no se juega, en segundos te puede quitar la vida o a los tuyos.
So you have to ruin a perfectly authentic safe disc, to make an absolutely unsafe copy.
Genius.
perfect! this saved me a lot of money. thanks!
Esta peligroso para cortar materiales duros o semi- duros
This is not only incredibly dangerous, but like every other DIY "hack" video on the internet; it assumes you have the material simply lying around (most people that don't work in the trades don't have sheets of sheet metal lying around) and really, by the time you get done with this, you could've gone to any local hardware store and spent $15 on an ACTUAL cutting disc, not some hacked together thing that may or may not spray you with metal slivers.
$15?
@@chhansen9813Not even. Usually less than $10. I was just being generous.
Or chunks.
Et puis lorsque l'on se trouve sur un chantier, il est bien rare qu'un autre corps de métier ne puisse momentanément vous dépanner d'un outil où d'un élément qui pourrait vous faire défaut.
If you do as nice a job as he does, you wouldn't end up with slivers of metal everywhere. Also, when using a regular cutting disc or grinding disc, on metal, (as it was designed,) it is a shower of metal shavings & embers shooting out 15 feet from the car. But that's less dangerous?
Using a grinder to cut wood with a DIY shrapnel blade takes a special kind of stupid... don't be that guy.
I appreciate your tenacity, but you're going to be disappointed when you discover that the circular saw has already been invented. 😂
My boss just hold a handgrinder and hold a drill bit to do this infront of me 20 years ago . He was not a only a master , he was a genious in all kind of engineering , from lab to site . I'm dead serious he was a genious. 😮😊
genius not genious, save yourself a keystroke...
Well this isn't a test you pitted olive , as well as it got the same sound . Keep it for yourself only you bummer.
Eminem : nanananana , nanananana ,
nanananana , nananananah
🕺🤸🕺💃🕺🤸🕺💃🕺🤸🕺💃
Genius wouldn’t want an angle grinder and homemade cutting blade to do the cheap circular saw’s job.
If the tooth are paralel with the thiknes, Disk might get stuck with the wood
No apropiado ni el disco ni la herramienta. Este video hay q denunciarlo. Es muy peligroso que alguno que no sabe del tema quiera copiar este mal ejemplo
Despite the fact that the item will be probably cheaper if you buy it from the hardware store, the are many reasons why you shouldn't make an angle grinder disk spinning 11k rpm from a zinked sheet metal. And first and most important of all is inevitable and uncontroable(explosive) disassembly throwing sharp metal pieces with a speed not lower than 80m/s(actual angle speed of the spinnig 125mm angle grinder disk). Or let's just say it is a VERY BAD IDEA!!
aqui na loja vendemos a 10 reais esse tipo de disco de madeira de fábrica
손가락 잘려도 괜찮으면 이 방법을 참고하시고 안전을 위해서라면
절대 일반 그라이드에 톱날을 사용하면 않됩니다.
작은돈을 아끼려다가 손가락을 포기하지 마세요 ,,,,
Some of the comments made here are not called for, we don't know the man's situation or his country situation if it was so easy to go and buy the disk he probably would have bought it, also think of he could not get it in his country so he made a plan, give him credit for that.
hi sir, you gave real description, in many countries people dont have posibility to buy, but this project is dangerous with that thickness of plate.thanks to the author of clip, but please consider thickness
VERY stupid
Tiene. Toda la rason casi lo quemo y es una gran verdad cada pais es diferente no todo gosamos prebilejil ❤ buena idea es mas en un casa que no pueda salir como aquel dia de la pandemia sirve
@bosko rankovic 😊ช
Да причём тут ситуация, в стране или ещё что то. У кого если нет возможности, то его здесь не было бы здесь. Так что, нечего тут...
Congratulations you made yourself a 100mm cutting disc for your 115mm grinder
I would just buy a saw blade made out of harder steel and probably has a better balance . Just an old carpenter retired after 50 years using the right safe tools . DIY have at it .
You need steel plate, 2-3 cutting discs and one day of work to make this. And it will be worse, than original. "Nice" idea.
I think we're being trolled.
@@strayedarticle2838 yes
yo no lo hago, a partir del segundo corte tendrás que afilarlo. es mas barato uno de china y mas duradero
Cool, the new Suicidal3000 is awesome. How many people did it kill?
BIENVENIDOS A LOS VIDEOS DE TACAÑOS EXTREMOS!
Como profesional en soldadura, y uso de discos abrasivos de corte y desgaste les recomiendo seriamente " ⚠️NO HAGAN LO QUE LES DICEN EN EL VIDEO" el peligro al que te enfrentarás es grande ,poniendo el riesgo tu vida por no gastar 1.5$ o 2$ en un disco de corte...
Um pouco perigoso, porém eficaz!
Já fiz muitos assim também.
Bastante perigoso moço.
Quebra com mais facilidade.
tá doido q eu teria coragem de fazer isso. 😂😅
This is dangerous it could cause accident 😳 i am afraid i won't try that
They cost like $5. I have no time for this, but it's pretty cool.
Wasn't expecting a Christmas tune on this video...
Puede ser útil para cosas finas y blandas. El disco de carbono o los discos diamantados y con widia resisten alta temperatura y de cualquier espesor
Yes brother
The perfect tool for winning a Darwin Award!
O BRASIL JÁ TEM ESTA LIGA. PESO DE ALUMÍNIO E CUSTO DE MADEIRA PRA FAZER. Molda-se a frio e tem 800 megapascal de resistência. E custa por peso, pouco mais que aço...
Para furar com broca de vídea quema a broca com 1/2 cm de furo.
J'ai récemment vu une vidéo où l'on montait des électriciens brésiliens tester des gants isolants.... cela en dit long pour le reste je ne pense pas que j'irais chercher des références chez eux en matière d'outillage.
Very interesting, suitable to try, thank you for your knowledge
So first you have to go buy angle grinder blade so can make a metal blade. Makes sense to me😅
Perigo avista o disco pode quebrar e quasar acidente grave.
The irony of using an angle grinder cutting disc to make a less safe cutting disc. Great idea really, dangerous in prolonged use.
"I made a low quality version of a $3 tool with only $2.79 in sheet metal and $120 in tools"