THICK METAL- NO PROBLEM - Diablo Steel Demon Thick Metal Recip Blades [AMPED}
ฝัง
- เผยแพร่เมื่อ 8 ก.ย. 2020
- Diablo Amped Thick Metal Carbide Teeth Reciprocating saw blades are made to cut steel up to 9/16" as well as stainless steel.
Diablo Amped Carbide 9-inch: homedepot.sjv.io/WjQmP
Diablo Amped Carbide 6-inch: homedepot.sjv.io/nO606
We put our blades to the test using schedule 40 4" pipe (1/4" wall) as well as some 8" C-channel with 5/16" thick steel and more than 1/2" thick webbing. Even after cutting multiple cuts through the pipe and C-channel, we didn't have any missing carbide teeth on the blades.
These Diablo Amped recip blades for thick metal can be purchased in 4", 6", 9", and 12" lengths, as well as 1, 2, 3, and 10-packs. - ยานยนต์และพาหนะ
![อาจารย์ยอด : ลุงแว่วเล่าเรื่องผี [ผี]](http://i.ytimg.com/vi/Fd2Qsy4dqpM/mqdefault.jpg)
Hello Shop Tool Reviews! As a retired Navy Hull Technician, I've done metalwork and been involved in fabrication and inspection for decades. I was shopping around for something to cut metal pipe for a project I'm working on and your video showed up. I really appreciate your review and demonstration here! Wishing you all the best! The thicker blade offering better control and less vibration, NICE!!! Thanks again.
Thank you very much. Thank you for your service to our country so that we are FREE. These thick metal blades from Diable are great for cutting thicker pipe, they definitely stay on track and don't seem to wander as bad. Thanks for watching.
Great video and wonderful review...
I never use that one, but I use the Diablo blade about three years ago to cut up a cast-iron radiator. First we tried with 7 inch grinder, however the blade would not reach all the way through. But the Diablo blade cut through the biggest part (which is over half inch) and I made six cuts like butter. The people were going to actually buy me a new blade, but there was no need to it was fine.
I just picked up some Diablo thin metal carbide tip blades today, they have a TPI of 20
Yep, those blades kick butt. I had a well used one, needed to cut an inch and a quarter pin twice. Used a water hose on trickle to keep it cool and getter done.
Good job. I just ran into an old 4" soil pipe when replacing an old septic tank and appreciate the info.
Thank you very much I love the video. Very helpful and you earn my subscription
Awesome, thank you! Thanks for watching.
Just cut the thickest jungle gym made of steel! Using those blades I need more blades for tomorrow!
The speed is what makes the big heat. These operate just like a drill bit. Speed vs Rate of feed. With a tool that has varying speed, concentrate on using less speed, and more pressure. The performance is much better. They just do better the slower you run them. This technique will increase heat built in the motor of the device tho, so be careful not to let the smoke out of it.
Had to use a 9in thick metal one to cut through bushings and grade 10 bolts on the lower control arm for my car. Hell i cut the lower control arm in half with it just to get more clearance. But dear God did it work and I only had to use 1 blade and it still looks fine.
Thanks for sharing. These blades are pretty amazing for thick metal. We can't believe the abuse that you can put on through. Thanks for watching.
video starts at 4:13
thank you, loo
it will serve to cut meat answer please
Just here to see what a sawzall CANT cut through to prevent my catalytic converter from being stolen again. 😭
Concrete
Diablo combined with Makita JR 3070CT gives great results 👍
Great point! These thick metal blades are pretty awesome. Thanks for watching.
Those are some bad a$$ blades. I’ve got a Diablo carbide blade but I haven’t seen those yet… I might have to pick one up soon. Thanks for the video.
In your opinion what is the most difficult metal to cut thru w/a Sawzall? If one wanted to seriously slow down Catalytic bandits, exactly what grade, thickness etc of metal would you use? I'm thinking of welding a line of cold rolled along the exhaust system.
any metal that will work harden
Be the first time I need to order some Blaze I buy a lot of junk cars and I cut the converters off the car and I'll go through hell of a blaze
These Diablo blades will cut the converters with ease, and they'll last a long time. Thanks for watching.
Will it cut through weld?
I’m interested and wants to see Diablo jigsaw carbide tip jigsaw blade..
We will try to get some of these blades in for a review. Thanks for watching.
are you running the saw full speed?
Would you say it will cut truck frames
Rothenberger were making these years ago. Use them with a rotiger saw will cut 12 inch pipe no problem.
where can I get that c clamp?
Would using cutting oil help extend the life of the blade?
Yes, lubricating the cutting surface will typically always help extend the cutting life. Not only does it lubricate, but it also helps to keep it cool. Thanks for watching.
What type of lubricant would you recommend???
Can a 20V cordless reciprocating saw with a good blade cut through 1mm-thick spring steel plate?
Yes, with the right blade, it should cut through it. Now, at the same time, I wouldn't recommend using it to cut a lot of 1" thick spring steel. Thanks for watching.
@@Shoptoolreviews Would a cordless jig saw with the right blade be just as effective? It would be easier to control with one hand for what I need to do.
Купил себе такие но пока не пробовал их в действии,
Правда цена в Москве за три полотна 2500 рублей
Thanks for watching.
I don't get spending all day cutting or grinding a piece of metal apart. I bought a 5⅜" Milwaukee circular saw for metal and it'll cut through pipes like a hot knife through butter. You have to change blades for ferrous and non-ferrous metals but compared to these other options it totally kicks anything else's ass.
old concrete lined expansion tank?
Not sure about that. I think it may burn up the blade in concrete. Thanks for watching.
angle grinder probably
Hey shop tool reviews I think you need to delete the comments that have the NSFW links
I am so sick of these. They hit almost immediately after posting. I keep reporting as spam, but it doesn’t help. Thanks for mentioning and sorry about that. Thanks for watching too.
👍 they commented on one of my vids too annoying as h*ck
nuclear explosion I’ve been seeing a lot of them the past month but here recently I haven’t been seeing them as much. I’ve mostly seen the on smaller tool channels.
Cost how much.? Total set
Depends on length and the number of blades in the set. You can get them for as little as $15. Thanks for watching.
Buy a cheap hacksaw and keep fit as well
Why not use this blade with a super sawzall. I have use these blades with super sawzall to cut through metal and cut a lot faster
We could have done this, but we didn't want it to be about the saw. We really wanted to test and showcase the blade itself. Mark my words, if I would have used a Super Sawzall, we would have several comments about using a new tool to get such good results, etc. However, the Super Sawzall is a great tool. Thanks for watching and commenting.
Start of the video you say you didnt have the time at the event to see how long the blades last then when theyre in the shop you dont test them to see how long they last? sure its gonna vary by user, and a little luck on how well each specific blade was bonded and how each cut goes.. only takes a tiny mistake to chip off a couple teeth and that starts a chain process.. but in general using the saw in your hand a few minutes between cuts how many does it make... maybe test two blades in each material to get a little consistency, probably 10 man hours put in to get this video out why not put in that extra hour to make it informative
You're pretty informed on how long it takes to film and produce a video. A little off, but you're very close. :) We actually Did use up the blade. We were just reluctant to share the info. And, we had this discussion with ourselves before filming the conclusion of the TH-cam video. Because of your question, and our prior reservation, we just dropped another video on Instagram showing the total number. We made 15 cuts with one Diablo Amped blade, and we made a 16th this morning to show it in use once more. The amazing thing is ALL the carbide teeth are still on the blade. Typically, on other blades, these like to disappear (fly off) after a few cuts.
Furthermore backstory on why we questioned including this. If you're talking about battery runtime on driving 3" deck screws in wood, that's pretty straightforward. Same with an impact wrench on 3" bolts with 7/8" threads, or cutting conduit with a recip. It's pretty hard to screw that up. However, you start publishing numbers on how much of a car you can sand with a single sanding disc, or how many pieces of thick pipe you can cut with one blade, you get those from all sides saying there's no way, etc., etc. Anyway, I'm sure we're overthinking it, but those were our results. Thanks again for taking the time to comment.
@@Shoptoolreviews yeah i agree it can be all over the place at times.. but just posting comparisons between products an disclaiming hey this is what we got doing it our way your results WILL vary should be plenty to notify people you arent promising x amount of cuts from so and so's blade, im just curious is all what can be expected from one blade, maybe in linear feet of 1/4" plate, with oil without oil, all at once vs letting it cool every so often, cost comparison to an angle grinder and abrasive disk, ive used recips for piecing up 1/4" before and liked it, the bimetal milwuakee torch's actually did better then carbide... but compared to the grinder it was really hard to stay true to a line even with a straight edge clamped down and it made quite the racket... those bimetal torch blades could cut for as long as you like though.. theyd last a dozen feet easily unit i messed up and bent the blade somehow after that theyd track too far off
thanks for the video keep em coming, any coverage on milwuakee's pipeline video deal? i seen the first batch of new tools waiting on whats next
I'm about to drop 2 videos this morning. First will be a DeWalt FlexVolt grinder and then it's a new Milwaukee Pipeline video from Episode 2 last night. Thanks again.
What a useless bench cramp 😂