Opel Vauxhall Grand Sport Brake Pads Replacement DIY Electric Parking Brake System EPB
ฝัง
- เผยแพร่เมื่อ 19 ก.ค. 2024
- In this episode, we will show you how to change the brake pads on a 2018 Opel Insignia Grad Sport, equipped with Electric parking brakes.
The operation is identical to that performed when changing the brake pads on a VW Passat CC, except that then ,we also presented the option with a diagnostic tool. I have added that tutorial’s link in the description.
Actually the electric motor on this Opel is the same as the one on the Passat CC .
You don't have to worry about manually retracting the adjusting bolt, as it will automatically recalibrate upon the first activation of the parking brake.
Link to episode:
Passat cc Brake Pads Replacement EPB Electric Parking VW Passat cc No Diagnostic Tool
• DIY Passat CC Brake P...
Disclaimer: The content of this video is available for informational and educational purposes only. It is not intended to be a substitute for the professional advice of a mechanic who has personally inspected your vehicle. The DIY Workshop and any sponsors of this video assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The DIY Workshop recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of The DIY Workshop, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The DIY Workshop.
00:00-01:05 Intro
01:05-01:50 Tools needed for the job
01:50-03:35 Removing the electric motor
03:35-04:50 Fixing back the electric motor
04:50-05:25 Preparing the support bracket for the new brake pads
05:25 -07:30 Installing the new brake pads
07:30-08:57 Finishing steps and outro - แนวปฏิบัติและการใช้ชีวิต
There is "EPB service mod" for retracting rear calipers and pads.
Also it's not good idea to put regular grease on breake parts. There is special coper grease for touch parts(rear of pads, metal pad holder...) to remove noise and silicone grease for moving parts (two bolt holding caliper).
Keep up the good work!
mega it worked perfect thank u so much
With pleasure!
Nu inteleg de ce nimeni nu livreaza placutele de frana cu tablitele alea, pt ca nu gasesc nicaieri sa cumpar. Daca nu le pastrezi pe alea originale, o sa auzi mereu un scartait la franare la viteze mici.
Multumesc pt informatii !
Cu plăcere. Mă bucur că te-a ajutat tutorialul și îti mulțumim pt comment!
If i dont aply the handbrake, do i need to retract it then like in the video?
Yes, you do. However, another viewer left a comment saying you can place the car in brake pads replacement mode without a diagnostic tool. I haven t checked this info yet. When we made this tutorial there was nothing online. Now I bought a multi brand diagnostic tool so it' s much faster.
Thank you, I have just ordered my rear discs and pads. I was searching for tutorial and i have found your video. I just wanted to say that I guess you can put it on service mode therefore no need to remove the motor from the caliper?? I heard that there is a procedure like this:
ignition on
Firmly depress and release brake pedal 5 times
depress and hold brake pedal
Press and hold EBP switch till EBP malfunction light flashes on dashboard
release EBP switch
press and hold EBP switch for 5 seconds
release brake pedal
EBP malfunction light goes out briefly
Now you are set
>To take it out of service mode<
Switch ignition on
depress and hold brake pedal
pull and hold EBP switch till EBP malfunction light goes out on dashboard
release brake pedal
switch ignition off !
Somebody has explained it here:
th-cam.com/video/YBxugEiAsfE/w-d-xo.htmlsi=3J2gcvDJ64NomI4a
Never tried that but it seems even more complicated🙂