ฝัง
- เผยแพร่เมื่อ 11 ก.พ. 2024
- Updates will be in a pinned comment down below
Big thanks to Jaden Brown who made this video possible. He was able to put this video together with all the camera work and editing involved over the past few months.
Link to parts used in the video
avaspark.com/product/pint-pin...
if you have any questions feel free to email me or message me on discord
contact.avaspark@gmail.com
4_fools on discord
*Updates / corrections from what was shown in the video*
New ubox100v seem to come already with momentary button firmware
If you bought your kit with an AvaSpark RGB Led control module you do not need the separate Button adapter
button can go into the Led controller and
SW on the 5 pin connector goes to SW on the Ubox
Gaskets should go on the inside of the box for the motor and footpad connectors
*Premade JST wire harness (coming soon) no need to repin nearly as much/at all
*current footpad connector 3.3v and gnd are swapped from in the video one
*New Vesc express based CAN BUS bluetooth module (plug the bluetooth module into canbus not uart as shown in the video)
to connect, hit scan canbus button and connect to the ubox
*Improved Motor connector
*new metal mount should go like so
- screw (top)
- little washer
- big washer
- mount (bott0m)
Use locktight on mount screws
This was the MOST ENTERTAINING VESC build video I have ever watched. Sorry Mario from the Board Garage, this one takes the prize !
This was awesome! Best VESC video yet!!
This video rocks so hard. I humbly request more in this style, hours of editing be damned. And FFM!
This video is awesome! I didn't know awaspark was a thing so I'm definitely looking into VESCing my Pint X
This video definitely deserves more views and likes, thank you for the hard work
Great kit and the support you get from Ava Spark is worth the price!
super well done video thank you for the detailed breakdown!!
Awesome vid! Can't wait to try this myself
Dude, this is awesome
Great video!
Great video! Have this saved for when I can do it. Just bought a PintX and I’m super underwhelmed by its ability to handle grass. Hoping that those upgrades and a treaded tire will improve that!
Sick work bruh sir 😂
This is awesome.
That was a quack and a half!
Ahh, the arcane art of vescing a pint.
Nice!
I'm sorry "direct connectly" is now the best part of the video
instant sub
Some people can’t handle the truth…
The 3rd Will VESC video is vaporware.
Awesome stuff!
-> A bit off topic, but what fender is that?
a stock fm i cut for a mini fender. a poor mans drop top fender
Hahah awesome 😂
Sweet vid, keep it up. Did you have any issues ordering from Ava? Been thinking about getting one of the kits. Not a lot of company info on the site and limited payment options, so was a bit worried about ordering from them. I can see why they might want to remain a bit hidden however with the evil beagles on the hunt.
Ah it's only because I'm not best at setting up a website and had a friend help set it up
If you have any issues feel free to email
Run that purchase from Avaspark. I have received a solid product, and even better support. Little diy, little learning, and you'll have cool lights !
@@nicktrainor5950 Just did it today. Looks like there are a few weeks out on their lights, but hope to be PintX-Vesc soon.
What kind of speeds at 85% duty cycle do you get with the 15s battery and the Hypercore?
I noticed that the motor controller only had the 3 big pins on, where do the 5 small pins on the connector go?
What do you mean by 5 pin?
The hall sensor motor connector is 6 pin and goes right into the 6 pins on the vesc
How do you mount the new metal bracket? I see it fits nicely around the 3 thread towers for the factory screws but the towers are too high and the screw heads are too small to secure it.
there should be washers the comes with the kit for the mounting bracket, i'm sorry if i missed including them, please email me your order number if you cant get ahold of some i can send some out to you.
You da man! Emailing you now.
Where can I find the momentary switch file?
It is the the product description Google docs
At the bottom of the doc
be careful guys he’s creative but he’s steps for removing cables are off .. bms should be the first thing unplugged and the last thing re plugged .. so i clicked off when he skipped this step
There’s no basis for this. You’re speaking from ignorance and a lack of experience
@@quitwoozy5224 you have no experience u can’t even afford a onewheel , i have 3 so hmmm
Hello @@jonwivccc7926
I am the creator of the kit and would like to clarify the BMS connector order
The thing the breaks the FM BMS's on wrong connection order is drawing power through the balance wires
This video was made by Jay a member of the community which is why there are some corrections and updates in the pin comment.
If you have a correction you think needs addressed in the BMS connection order please let me know and I can put it in the pinned comment
@@4_fools792 you should take this down / or a do a correct video .. this scares ppl from buying vesc
@@jonwivccc7926 You have given no actual feedback. Your information is incorrect. Stop trolling on an information vid bruh