How to change your Onewheel Pint / Pint X Tire
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Need some tips on how to get that stubborn tire off your pint and a new one on? Jesse is here to help! In this video, Jesse will teach you how to change the tire on your Onewheel Pint or Pint X. Let us know in the comments if this video helped you conquer the rubber!
Join this channel to get access to perks:
bit.ly/3g2piyc
Follow us on Social!
Instagram: @TheFloatLife
Facebook: @TheFloatLife
Reddit: U/TheFloatLife
To learn more about Onewheel Accessories, make sure to visit our Onewheel Accessory Guide here: thefloatlife.c...
TFL Enduro Tire - GT: bit.ly/3CWVT1z
TFL Enduro Tire - XR: bit.ly/3TmcVv5
TFL Life Savers - GT: bit.ly/3Ti6UQb
TFL Life Savers - XR: bit.ly/3RSELy4
TFL Tire Sealant: bit.ly/3MuDlZJ
TFL Homebrew Rails: bit.ly/3rUOVna
TFL Onewheel Footpads: bit.ly/3RYmwqY
TFL Onewheel Grip Tape: bit.ly/3RYYtYU
TFL Onewheel Stand: bit.ly/3EFPKbc
TFL Onewheel Bearings: bit.ly/3CTO1h6
TFL Onewheel Sidekicks: bit.ly/3EFvM0m
TFL Onewheel Lock: bit.ly/3rPPKOj
TFL Lifestyle Clothing: bit.ly/3CsMXiV
#TheFloatLife #Onewheel #TFL #FloatSupply #Esk8 #PEVcommunity #ElectricRidables #OnewheelLifestyle #JeffMcCosker #NightRiding #WheelFunStuff #BodhiHarrison #ElijahSoto #FloatOnMyFriends #Onewheel #OnewheelXR #OnewheelPint #OnewheelRider #OnewheelGang #OnewheelPlusXR #OnewheelAccessories #OnewheelNation #OnewheelTricks #FloatPlates #TheAccessoryOG #Esk8 #PEV #Esk8Squad #Esk8Riders #Esk8r #Esk8ordie #Esk8Life #DestroyBoredom
bro made it look easy, this took me all day
Just changed my first tire to an Enduro. Only took me two hours..mostly because whoever had this pint before me decided he wanted to put more slime than air in the tire. It was like a fountain in there! As soon as I broke the bead it just came spewing out. Probably spent more time cleaning up ooze than actually trying to get the tire off.
So I haven't been following one wheel stuff for quite some time, I just ride my board. But I remember back in the day people complaining about their boards becoming paper weights if you disconnected things. Does future motion no longer brick your board if you get into it yourself now?
Community worked hard and created a solution to that. Unfortunately, FM killed that solution with the most recent firmware update.
@@TheFloatLife so I just got my first flat tire. So if I change it myself it'll brick my board still?
@@shawnbowen6833only the GT does that, and it’s if you disconnect the battery from the BMS. (This connection is INSIDE the battery box, you can’t do this without opening the whole batttery box so no danger here). Disconnecting the motor cable to do a tire change will do absolutely nothing to your board.
In general if anyone is having trouble getting a tubeless tire to seat, it can help to NOT put the valve core back in before using the air compressor. The valve core can restrict airflow and without it you can get a higher pressure which just might be what you need to get those beads to seat.
Those "impossible to find" screws are M3x14mm Countersunk screws... M3x16mm fit as well; not as rare as it sounds
Maybe in the US it's tough to find with their freedom units
@@ThisMarv naw my local hardware store has plenty metric hardware, they even have hex stainless steal bolts which is a huge upgrade over the black oxide philips ones fm gives you
@@AldenJohnson Never been to a hardware store in the US, are hex stainless steel bolts rare over there? Pretty normal here
@@ThisMarv M3 is basically standard screw size on FPV Drones and RC Cars, so those are used everywhere around the world, even in regions where they measure bodysize with pineapples and strawberries ;-)
Maybe he meant hard to find on the floor if you drop them since they're small
What about tire slime? Or bead gel?
Loved this video, I have to mention to be SUPER CAREFUL with the connector when removing it. It is super easy to bend or break the pins coming from the controller if over or under tightening. FM won’t cover that damage under warranty, and the controller is $340 total for parts/shipping/labor (as of April 2024). Learn from my mistake!
I have a similar build to this guy and the stock tire is a pain to rip off like like that! Sidewalls are super stiff. I looked like an idiot monkey man jumping on the wheel, but I got it off finally 😂
Ditto. I still have the stock tire and really want an Enduro. Watching this to pump myself up.
Just had a similar time. I foolishly decided to cut the middle out with scissors and had to ween the sidewalls in one at a time and then saw and bend the wire slowly
i can relate so hard lol and im about to do another tire change in a week or so... fckin dreading it lmao
Unscrewing the front footpad cable with just his fingers is the most impressive part of this video.
"find those angles" ......okay.
What’s that front footpad??
I'm assuming it's a kush nug with a sensor transplant. It's a custom job
Unless they got a prototype going on they didn't say anything about 🤔
@@JedDungo that’s what I’m hoping for!
i dont even own a pint, or need a tire change, but here i am.
I dropped two tire levers inside of the tire trying to get it off, but this was very helpful!
Hahaha been there!
lol Jesse casually making everybody who spent money on a bead breaker look WEAK
Lolol he skrong
What front foot pad is that??
Second this? Did they transfer the sensor over to a Kush Nug? I like the locked in feel of the angled pads, but don't want to deal with the angle adjustments of the W rails using a Pint X.
is that a kush in the FRONT??? aye yooo
Dude that screwdriver is legit!!
I got that same metal chair! Genius idea buddy, Good lookin out 🔥
my boy jesse making it look EASY ! man.. im dreading my new tire change soon lol
Thank you for showing us this. Now \know that there’s absolutely no chance in hell I would be doing this by myself. Zero interest.
Front plate is the hardest thing I’ve ever had to twist off on my life!
Hey thanks for this awesome video! Are you supposed to add tire sealant around the rim before you put the tire? Does it matter?
Shouldn't need to.
Your boy jessie is nice with those tire changes
He’s hand QC’d hundreds of enduros 😳🥵🤩
*thousands
Do you bother putting in tire sealant? I had my local board shop put my enduro on my GT for me, but going to put a new Burris on my pint myself. Its the backup board so figure its a good way to learn without knocking out my main rig, lol. I still have half a bottle left over of the stock Future Motion stuff the shop used, and ordered some of that armadillo stuff from C&R. Not really sure which I am going to use, if any, on this Burris...
Poor tutorial 1:30, really should’ve shown how to disconnect
Right!? How tf do I get this cable unscrewed??
@@scottmakoto515cable is impossible to unscrew by hand if it’s your first time changing it, you need like pliers or clamps just to grip it
I can never get the beads to seat at low PSI. It's always a hassle for me!
I ride at 35psi lmao FLYING
So suppose you unscrewed the footpad sensor wrong, from the cable not the screw cap, and subsequently destroyed the wiring... How difficult is that fix?
I guess it depends on your soldering skills
ok, now im scared for when i change my tire
Don't be! You got it!
@@TheFloatLife Sure thing...
@@IkeTV.how’d it go
Check out the Michelin tweel. I wanna know Jeff's thoughts on a onewheel version of it.
Dude... the magic with the tire levers to get the rubber up and over the rim. I almost want to change my tires for no reason to try that. Need to get another lever first though, on'y have one.
I've used a pair of Dewalt clamps to break the bead on a couple tires so far... it's a game changer.
@@CayoticProphet I was using Irwin Quick Grips before I got a bead breaker. That portion wasn't the challenge, it's getting the rubber off the rim that flabbered by ghast
Just finished replacing my pint with an enduro tire, here’s the one obstacle I faced in face someone needs the solution: I got as far as pumping up the new tire but the beads wouldn’t set on the edge of the axle at 25psi or lower. I contacted FL and they said to go ahead and pump it to 75 psi so it would set and then bring it back down. I took it to about 54 before both sides of the tire popped in and it worked!
I also threw a bit of soapy water on before pumping the air to help it out. Also I pumped at a gas station that works fine in case anyone was wondering
Why is it called a delete...
Thanks Jesse great video tire replaced.😊
I've broken 4 tire levers trying to remove my stock tire. What am I doing wrong?
You're not using the groove on the rim for the other side of the bead
i hope that whoever designed this difficult way to put the tire together stubs their toe on every corner every day for the rest of their life
What the funky man. You didn’t show how to remove the connectors close up. It is costing replacing half the unit for new controller
Same thing happened to me the other day.
what happened exactly? did you accidentally break the connector when unscrewing it?
The connector to the control has an external tightening nut. It doesn’t look like it at first, and it is very tight. The connector is a OEM 5 pin that is very easy to damage.
With life savers its not so easy to break the bead 😎
I bet he is on weed...
The T30 screws on my hub are RIDICULOUSLY tight, they refuse to even budge, and they’ve never been removed. Bought my Pint brand new a year ago and recently bought some new parts for it. Anyone have any tips?
Went smooth at first but the tire won’t just slide in there for me. I’m gonna have to take off 1 side of the rails to get the enduro on there 😅
Torque specs?
I really appreciate you mentioning the axle block covers at 2:09 by name. One of mine was cracked when I received my brand new Pint and I was worried it was some really important part and that I'd have to send it in for repair or something. A quick Google search showed that I could just 3D print new ones though, so now my mind is at ease : )
21 gives the max distance for city. Less is for off roading
Great Tutorial Jesse much easier than removing all rails like others show. It's certainly worth getting magnetic bolts screw pan for keeping all your bolts etc in. Also instead of using that annoying hex key cut off L part and insert in your drill chuck far easier!
had my pint x for about 3 weeks and the bead failed and popped off the hub while i was riding and threw me so hard :C
I just did it to mine but it started to have a bit of resistance on the free spin of the tire with the board turned off and makes a slight hum like sound and I'm not sure what I did wrong or how to fix this.
I broke my Onewheel trying to get the footpad cable unscrewed! 😢
6:23 You made me just realize a zen moment in my life. I just walked away from a 23 career due to mandates, typically reserved for gay me. With just $40k in a 401k, I sold my house, bought an RV, and a half dozen OneWheels (3 for other people helping me sell my house). Its apparent I have completely run out of Fs to give, however, the Enduro tire on my WTFs-CBXR quite literally "Has Fs to give!" 😆
2.5 years traveling the us.
My tire gave out yesterday, and I only put 800 miles on it. Oh well, I guess that's what NM roads do.
Rc hobby shops have the correct size hardware for those smaller screws. They will just be a allen head.
Did he just install a Nug Kush Hi on the front after the tire change??
Dude the front sensor is a transplant from a FM front sensor or is something else?
Are you sure my fingers are not to sausagey to reach into the panel?
Looks easier than the XR that was a nightmare!
why didint you put any slime?
If I had all the tools I could do it but I don’t ):
How do I get my wheel to set? I do not have a float life tire. I have a one wheel tire. It is a pint. I have it on all the wheel is set except about 3 inches of one side question what do I do?
did you ever get it to set?
Front pad?
Great video! I think I can do it!!!!
I believe in you!!!
Where can one get that split fender?
You can’t, it’s illegal in America
Craft and ride has some available
6:00. It’s all about the angles 🫡🦍 that’s what she said