If you are interesting in one of these units here is the link and if you just want to look thats 100% fine too! Let me know what you guys think in the comments below. BELAY MINING: belaymining.com/?sca_ref=2134... Coupon Code: CC25OFF
No apologies needed that was a great rundown, learning as we go, I was only thinking myself as I've been watching you build a while now, most of it learn as you go, so the troubles your running into mate helps heaps with our troubleshooting later, so never think a video is unsuccessful my man or lacking content, cause they never do. I got 200 acres at disposal for solar mining and a 2 story new empty house, fly over and let's do this thing lmao ;) j/k ....but you can imagine, I have all this in anticipation, not in capital so starting small. Rambling on again, great start to the day great vid, rock on
I'd love to know the wiring. I have a little education in solar but almost zero experience. I believe you have two parallel lines of 12 volt panels (24 volt system). You might think about a higher voltage system. Each line is only as strong as the weakest link, so if a panel gets blocked or shaded, the other panels' energy production in the same line are affected as well. If you had a higher voltage system, you would have fewer panels in each parallel line. Essentially, if one panel drops production, fewer panels are also affected.
So my system is 24v and I have 4 x 100w panels, 24 Volts each equaling 80+ volts per parallel string. I am learning as I go so mistakes will be made I’m sure! Lol tomorrow’s video is adding 4 more panels to my system
@@ChumpChangeXD maybe you have a higher voltage system. Not sure your terms are accurate. Parallel panels would be compounding amperage, not voltage. But, if you misspoke and they are 80 plus volts per line (so, in series, with each line in parallel to the other lines), you are in better shape than I thought. That would be a high voltage system.
@@ChumpChangeXD , each parallel line can only produce as much as the weakest panel, so if one gets blocked, all panels in the line reduce production accordingly. However, if the lines of panels are in series, with each line in parallel, if one panel goes out, you merely lose the production from one panel, however each parallel line will reduce production to equal the degraded line production. So, essentially, you would lose a panel in each parallel line, just cuz one panel went out.
I could be wrong.... You're the one with practical applications. But, that was how I understood it when it was taught to me. Like I said... Almost zero practical application experience. I really hope it helps though.
I have a feeling your wife is just like "yes go outside and do what you need to do... " haha Always entertaining. I get annoyed when one rig keeps messing up. I can't imagine fiddling with all the stuff you have setup now!
Hi my friend so happy i found your channel. Im new to mining only have 3x rx 580 8gb gpus. Im busy with solar setup myself. At the moment I have one 330watt panel and 3000watt inverter with two 200ah gel batteries.
Dude that’s awesome! I am trying to figure out what’s going on with my set up currently I got it working last night for most of the night and then it did the same thing to me so I am assuming one of my batteries are at fault here I’m going to purchase two more and see if that will solve my issue; having four hooked up instead of two but we will have to see! Appreciate your support!
Think its your battery pack my friend dont think your ah is enough to maintain the power being drained from your battries even with power coming in from your main/not panel's. But pleas keep me/us updated my friend
I have the same unit running Some Mini box miners - you want to set setting 21 point back to utility probably around 40 % discharge of battery bank - or it will shutoff in the middle of the night do to self consumption of the inverter … also check your pv Voc . It says it can handle 145 and run at 115 but - at 115 volts it shuts off .. so I had to reconfigure the solar strings to lower the voltage ,to keep it from kicking off charge controller ..
Dude I would LOVE to talk to you in my discord. I have been checking in messing around with the settings all day on number 21 I’m not sure how to set it as you’re saying I put it to 24.0v that correct?
You probably have to switch it back to utility power before it gets to 24 volts probably 24.7 . The reason you can’t find percentage it’s only available if you’re using eg4 battery with communication ... I also would set the charging to only solar - I found if you have a heavy load on it ,and when it switches over it kicks off . . The voltage u have coming in from panels is good .
This is not an EUROPEAN plug but an AUSTRALIAN plug lol I used to live in Europe, more precisely France and European standard plugs are totally different lol A simple search on the Internet could have given you more info :p Have a great weekend my brother and keep on solar mining
@@ChumpChangeXD yeah. Have you checked out the battery stacks? A guy I talked to uses 6 batteries and runs a 2kwh farm constant with it. It’s pricy but man being off grid is nice. Run roughly 10kwh for my farm. So battery power will be expensive. And it has a shelf life. That’s the thing that worries me. I get a year on and batteries are losing power
@@ChumpChangeXD yeah man. I’ll hit you up on discord with some stuff I been looking at. The stacks are cool and look pretty simple to install. Just expensive
Because I don’t want to be grid tied at all eventually. I just need more batteries and panels. The grid tie is just supplemental until I can make it 100% free power
@@ChumpChangeXD lol, yep. I actually switched it to 120 about a week ago. I finally checked the specs on the jingle mining site. Thank goodness, cuz I was running a 240 volt inverter (a big no no) before that.
If you are interesting in one of these units here is the link and if you just want to look thats 100% fine too! Let me know what you guys think in the comments below.
BELAY MINING: belaymining.com/?sca_ref=2134...
Coupon Code: CC25OFF
Yes a walk through on wiring would be great!!!
No apologies needed that was a great rundown, learning as we go, I was only thinking myself as I've been watching you build a while now, most of it learn as you go, so the troubles your running into mate helps heaps with our troubleshooting later, so never think a video is unsuccessful my man or lacking content, cause they never do. I got 200 acres at disposal for solar mining and a 2 story new empty house, fly over and let's do this thing lmao ;) j/k ....but you can imagine, I have all this in anticipation, not in capital so starting small. Rambling on again, great start to the day great vid, rock on
Dude that’s amazing! I appreciate you and thank you for the kind words! Need anything just reach out!
The humility of you and red panda, are why you're my favorite crypto channels. Us miners are all learning together.
Appreciate you! 100%
I'd love to know the wiring. I have a little education in solar but almost zero experience. I believe you have two parallel lines of 12 volt panels (24 volt system). You might think about a higher voltage system. Each line is only as strong as the weakest link, so if a panel gets blocked or shaded, the other panels' energy production in the same line are affected as well. If you had a higher voltage system, you would have fewer panels in each parallel line. Essentially, if one panel drops production, fewer panels are also affected.
So my system is 24v and I have 4 x 100w panels, 24 Volts each equaling 80+ volts per parallel string. I am learning as I go so mistakes will be made I’m sure! Lol tomorrow’s video is adding 4 more panels to my system
@@ChumpChangeXD maybe you have a higher voltage system. Not sure your terms are accurate. Parallel panels would be compounding amperage, not voltage. But, if you misspoke and they are 80 plus volts per line (so, in series, with each line in parallel to the other lines), you are in better shape than I thought. That would be a high voltage system.
@@ChumpChangeXD , each parallel line can only produce as much as the weakest panel, so if one gets blocked, all panels in the line reduce production accordingly.
However, if the lines of panels are in series, with each line in parallel, if one panel goes out, you merely lose the production from one panel, however each parallel line will reduce production to equal the degraded line production. So, essentially, you would lose a panel in each parallel line, just cuz one panel went out.
I could be wrong.... You're the one with practical applications. But, that was how I understood it when it was taught to me. Like I said... Almost zero practical application experience. I really hope it helps though.
Love these videos on your solar setup Chump !
Yes I would love to know the wiring!
I have a feeling your wife is just like "yes go outside and do what you need to do... " haha
Always entertaining. I get annoyed when one rig keeps messing up. I can't imagine fiddling with all the stuff you have setup now!
Haha it’s brutal but I will get it working! Lol
Hi my friend so happy i found your channel. Im new to mining only have 3x rx 580 8gb gpus. Im busy with solar setup myself. At the moment I have one 330watt panel and 3000watt inverter with two 200ah gel batteries.
Dude that’s awesome! I am trying to figure out what’s going on with my set up currently I got it working last night for most of the night and then it did the same thing to me so I am assuming one of my batteries are at fault here I’m going to purchase two more and see if that will solve my issue; having four hooked up instead of two but we will have to see! Appreciate your support!
Think its your battery pack my friend dont think your ah is enough to maintain the power being drained from your battries even with power coming in from your main/not panel's. But pleas keep me/us updated my friend
@@hfsmuts7749 yea that’s what I’m thinking as well after going threw the settings I think I just need a few more batteries
I have the same unit running Some Mini box miners - you want to set setting 21 point back to utility probably around 40 % discharge of battery bank - or it will shutoff in the middle of the night do to self consumption of the inverter … also check your pv Voc . It says it can handle 145 and run at 115 but - at 115 volts it shuts off .. so I had to reconfigure the solar strings to lower the voltage ,to keep it from kicking off charge controller ..
Dude I would LOVE to talk to you in my discord. I have been checking in messing around with the settings all day on number 21 I’m not sure how to set it as you’re saying I put it to 24.0v that correct?
Also my power coming in from the panels is around 80v
You probably have to switch it back to utility power before it gets to 24 volts probably 24.7 . The reason you can’t find percentage it’s only available if you’re using eg4 battery with communication ... I also would set the charging to only solar - I found if you have a heavy load on it ,and when it switches over it kicks off . .
The voltage u have coming in from panels is good .
FIRST, YES!
😁
My Man.
RUST LATER!
@@ChumpChangeXD YES please
Insider content creator trading lmao
This is not an EUROPEAN plug but an AUSTRALIAN plug lol
I used to live in Europe, more precisely France and European standard plugs are totally different lol
A simple search on the Internet could have given you more info :p
Have a great weekend my brother and keep on solar mining
It’s NOT American that’s all I know. Lol
Nice stuff. I may go with a grid tie solar set up so my rigs never lose power. I am still researching and looking for panels
Yes! It’s a lot to learn and just settings inside my system or the batteries may need more to give even power I’m not quite sure but we will get it!
@@ChumpChangeXD yeah. Have you checked out the battery stacks? A guy I talked to uses 6 batteries and runs a 2kwh farm constant with it. It’s pricy but man being off grid is nice. Run roughly 10kwh for my farm. So battery power will be expensive. And it has a shelf life. That’s the thing that worries me. I get a year on and batteries are losing power
@@jtravaglini send me some links! im looking now for more options in batteries and such
@@ChumpChangeXD yeah man. I’ll hit you up on discord with some stuff I been looking at. The stacks are cool and look pretty simple to install. Just expensive
Those Jasminers come with Australian power cables not European. Just saying!
HAHA! ITS NOT AMERICAN THATS ALL I KNOW! LOL
Blessings 🙌
Such a hunk!
🔥🔥🔥🔥🔥
Coming along..
Can I ask why even mess with batteries. Just do a grid tie inverter
Because I don’t want to be grid tied at all eventually. I just need more batteries and panels. The grid tie is just supplemental until I can make it 100% free power
Your jazminer.... Can run at 120 volts. Mine is. Pretty sure I have the same one.
No way! I thought it was 240 only?!
@@ChumpChangeXD lol, yep. I actually switched it to 120 about a week ago. I finally checked the specs on the jingle mining site. Thank goodness, cuz I was running a 240 volt inverter (a big no no) before that.
I am mining in Utopia because there is no point in mining on expensive equipment that will soon be digging in minus