No problem guys! It's undeniable that you guys have the superior bin, and I anticipate my Roxi Bins will outlast Lonestars especially in the "paint". But I can't pass up a deal when I find it, all about those margins! I would love to see one of your heavy duties assembled sometime. I have come across them at dealers, but with the door not installed.
Great video! I have definitely considered doing this. Right now there is a Load Trail for $26k with 2 bins near me but I think I will hold off until it would benefit my landscape business more.
@@rollingops Just generally all dumps and dumpsters, the nice ones will not have the welds in the corners of the floor because the welds will fratigue sooner then bent metal. The cheaper dumpster in this video has the welds closer to the corner which is going to break sooner than one where it is seamed say in the center.
Great content I follow you . I bought same setup as you thanks to you . I also just bought lonestar bins (2) and I’ve notice lonestar bin are heavier than max D with truck and trailer and bin max d weight 14440 and my lonestar weight in at 14840 that 440 lbs more I would have thought max d was built heavy duty at least more than lonestar . What’s your say in this ? My MaxxD setup is solid and very happy with the craftsmanship of the built has not failed me I have 7 months into the business Thank you from Texas JAZ LAWN & ROLL-OFF DUMPSTER SERVICE
I've noticed the same on mine! My lonestarts def seem to have a crappy paint job compared to my maxxd, my maxxd pain holds up 10x better. The weight difference on mine is definitely in the doors.
Very informative! Thank you so much! I’m getting ready to order me a set of dumpsters and waiting for a maxx D trailer to come in to the local trailer place, really hard to get in California right now!
I-Beam is a structure that gives a better durability to weight ratio. It doesn't work everywhere (e.g. in very long trailers it causes twisting), but it is beneficial in terms of construction (there are at least 3 types of it). Additionally, I-beam may show imperfections such as rusting or cracks, which is not visible in closed structures - it is easier to service in the long run.
What rail widths did you do and would you suggest sticking with the width you have. I’m new to this looking to start something soon just not sure on rail widths
@@rollingops I was looking into getting the same trailer as you with the Maxx d 14ft trailer but when looking at the website the bin size available only seem to be a 13 yd and not a 15yd... Do you advertise your 13yd Maxx d dumpsters at 15yd or 13yd?
A lot of guys say I should, but I have yet to find a good reasson. I can find these "non standard" cans. So I'll continue to use them. I understand guys like hooklifts and I see why, but I see a lot of pros in the trailer setup for a small operation.
I have a MAXXD too and I rather have this kind than the standard rail I like being different than everyone else besides if not a lot of people have the non standard rail the less chances of someone stealing it versus someone that has a standard rail
@@rollingops perfect. I ran rollof for 5 years but the big trucks and always found "ways" not sure if you had a technique. Thinking of doing this watched a ton of your vids
I bought a used Lonestar with 2 bins for my business instead of a second dump trailer. It needed a little work but overall has been good, the frame that raises is where I had the issues where they put the rollers in, it was just weak and needed beefed up. Luckily the dumpsters have held up, other then the doors can get a little sticky. I think I have it all figured out now and upgraded to 8k axles with 16 ply tires. I don’t rent out to the public, they just go from job to job for me so it works for now for what I need. I do believe the maxxd are better quality for sure when comparing the two.
I also had to put more welds and better in the dumpsters. I noticed the crap ones they did would just break off, we also load 90% of the time with machines which probably doesn’t help
Hey Clayton, thanks for the input man! The bins are actually powdercoated.
No problem guys! It's undeniable that you guys have the superior bin, and I anticipate my Roxi Bins will outlast Lonestars especially in the "paint".
But I can't pass up a deal when I find it, all about those margins!
I would love to see one of your heavy duties assembled sometime. I have come across them at dealers, but with the door not installed.
Great video! I have definitely considered doing this. Right now there is a Load Trail for $26k with 2 bins near me but I think I will hold off until it would benefit my landscape business more.
Totally get that!
Awesome info! I shall use this info when I start my dumpster business :) The competition in my town is lame.
Come and get me
So imagine what you paid for your truck and max dd we have to pay it twice when it lands in the islands
That's wild!
Seams being in the actual corner like that is really not great, too much stress in that are so the nice ones will seam in the center of the floor
I'll have to look back at this to understand exactly what you're referring too, I made this video a while back!
@@rollingops Just generally all dumps and dumpsters, the nice ones will not have the welds in the corners of the floor because the welds will fratigue sooner then bent metal. The cheaper dumpster in this video has the welds closer to the corner which is going to break sooner than one where it is seamed say in the center.
Great content I follow you . I bought same setup as you thanks to you . I also just bought lonestar bins (2) and I’ve notice lonestar bin are heavier than max D with truck and trailer and bin max d weight 14440 and my lonestar weight in at 14840 that 440 lbs more I would have thought max d was built heavy duty at least more than lonestar . What’s your say in this ? My MaxxD setup is solid and very happy with the craftsmanship of the built has not failed me I have 7 months into the business
Thank you from Texas JAZ LAWN & ROLL-OFF DUMPSTER SERVICE
I've noticed the same on mine! My lonestarts def seem to have a crappy paint job compared to my maxxd, my maxxd pain holds up 10x better. The weight difference on mine is definitely in the doors.
Very informative! Thank you so much! I’m getting ready to order me a set of dumpsters and waiting for a maxx D trailer to come in to the local trailer place, really hard to get in California right now!
Best of luck! They are hard to find now
Just picked up 2 maxxds 15yrds, top quality without a doubt
What size dumpster do you have also what size do you recommend to start
14 yard and 20s! I'd stick with the 14s to start!
I-Beam is a structure that gives a better durability to weight ratio. It doesn't work everywhere (e.g. in very long trailers it causes twisting), but it is beneficial in terms of construction (there are at least 3 types of it). Additionally, I-beam may show imperfections such as rusting or cracks, which is not visible in closed structures - it is easier to service in the long run.
Great feedback! Thank you!
Lve your vids im in the islands i will get into it its just expensive for us down here cause we have to pay custom and duty on everything
Yea, that would def add up+
Hello Clayton what's the make and model of your pickup truck I'm currently looking to purchase one for my company.
2019 dodge ram 3500
Ey men i have question i have road trail roll off dumpster any off the maxxd or lone star fits on the road trail trailer?
Load trail? I believe they actually have a different rail system!
Thanks for the video, I have 9 PJ dumpsters and had know idea the Maxxd bins would fit. Thank you.
Anytime!
Texas pride poke my eyes with their so called “standard” size rail system. It turned out it was just standard to them and not industry standard…
Yea, I've heard not so great things about them
I would like to get a goose neck but I don’t have a CDL. CAn that be done
You can drive a gooseneck without a cdl. Depends on your state and axle weights on truck and trailer
Can you use these to haul 5 tons of rock and use it like a regular dump trailer? Spread gates?
Sort of! I have done it and chained the doors together leaving a gap. Not ideal, but not bad either!
Where in Missouri is the best place to get a roll off trailer and dumpster?
Sancrest, Billings MO tell them I sent you
What rail widths did you do and would you suggest sticking with the width you have. I’m new to this looking to start something soon just not sure on rail widths
I will probably be switching these to standard rail eventually on a hooklift truck. But I like them as is now. MAXXD brand
@@rollingops what is considered standard rail? I get mixed answers
do you know if texas pride trailer and bins are compatible with lone star, maxx d, and pj trailers and bins as well?
They are not, I know that for sure
@@rollingops I was looking into getting the same trailer as you with the Maxx d 14ft trailer but when looking at the website the bin size available only seem to be a 13 yd and not a 15yd... Do you advertise your 13yd Maxx d dumpsters at 15yd or 13yd?
@@davidc5808 its advertised as a 14 yard. It comes to like 13.6 yards or something close. Most trailer dealers call it 14 yard
Hey you should get a bingfu antenna for your wireless remote night and day difference.
I'll look into it!
@@rollingops make sure its the male connection
Would you ever switch to a standard rail trailer like nedland trailers?
A lot of guys say I should, but I have yet to find a good reasson. I can find these "non standard" cans. So I'll continue to use them. I understand guys like hooklifts and I see why, but I see a lot of pros in the trailer setup for a small operation.
I have a MAXXD too and I rather have this kind than the standard rail I like being different than everyone else besides if not a lot of people have the non standard rail the less chances of someone stealing it versus someone that has a standard rail
what do you use to unload the new bins when they are stacked within eachother?
I paid a guy with a huge forklift $25 bucks. He operated a business literally across the street from my shop
@@rollingops perfect. I ran rollof for 5 years but the big trucks and always found "ways" not sure if you had a technique. Thinking of doing this watched a ton of your vids
@GustaPo haha I've done a couple where they were jacked up underneath and then tied to a tree haha
Wats size bolts did you get to fit bim on that maxxd trailer
I tried a lonestar bim on my maxxd tráiler and bolts were to thick
I'll have to look to see what I got to fit eventually. Once I had it figured out I just bought a bunch.
Please lett me know! I tried a 7/8 x 7” and it waz to tick didn’t work
Thank You. great info.
Anytime!
I bought a used Lonestar with 2 bins for my business instead of a second dump trailer. It needed a little work but overall has been good, the frame that raises is where I had the issues where they put the rollers in, it was just weak and needed beefed up. Luckily the dumpsters have held up, other then the doors can get a little sticky. I think I have it all figured out now and upgraded to 8k axles with 16 ply tires. I don’t rent out to the public, they just go from job to job for me so it works for now for what I need. I do believe the maxxd are better quality for sure when comparing the two.
I also had to put more welds and better in the dumpsters. I noticed the crap ones they did would just break off, we also load 90% of the time with machines which probably doesn’t help
Yea I have one dumpster that was abused pretty bad during a mobile home demo. Someone kept banging it with the excavator arm
Looking to sell my roll off set up! Know a good way to go about it?? Thanks man! Vids are awesome!
Hit the Facebook groups man, it will be sold in a week!
@@rollingops hard to even find them used for sale online. Less than a year old stet up wonder what they’re going for!
Where are you located?