in this Videoclip i show a very good System for a weldingtable. This weldingclamps is build just from my personal skills and not a instuctional step by step Video. Hope you get inspired Dirk Ahrendt
Just a thought if you use a bolt on the end you could dual purpose the clamps or quadruple purpose by using a barrel nut you could make extension clamps with a pipe like a pipe vice. Flip the clamp around and And make a spreader
Great job. Hat off to you sir for the magnets. You had me wondering what it was all about but it all came together very well. You just need to create non magnetic spatter!!
Solid. Gathering fab ideas for my own table and this is rad. Either going 3/8 or 1/2 top and mag drilling holes similar to what you’ve done. This style clamp is perfect 🤟
How come you don't use coolant or cutting grease @1:37 with the drill press machine? Is it because the bit is tungsten carbide and doesn't need it? I really love the portability of the drill.
hi, why did you make hole of 10mm instead of 20 mm? to be more efficient to attach other machines? thks and 2/ here why did you put "circles" on the big hole on the base blade instead of welding an squared iron plate? 6mm thick for the circle is that right ? thks a lot and GOOD GOOD JOB i'm dreaming on it to do the same but only one question : how i will do that to succeed like you ! :)
Very stable design. If you have the standard (more or less) 5/8” holes though it’s obviously impractical. You’ve got me thinking how much.i like the stability of yours. At taller heights mine move off center quite a bit
Thank you. The holes are 10mm i guess its a 3/8 with a 12mm thread. My workshop is in the basement that why i needed a light #weldingtable. The baseblade is just 6mm thick.
www.amazon.ca/dp/B071ZKQ2X5/ref=cm_sw_r_cp_apa_i_msRCFbXYR7VZK I found these. No matter the magnet, you may want to glue them in as well as using a fastener to prevent cracking. Rare earth magnets are very brittle.
WOW - what a brilliant idea. Very clever hook and magnet solution that immediately solves the drop-in clamp with a relatively thin table top (6mm). Another idea of yours that I need to implement. If you don't mind me asking, what size rod did you bend to make the hooks? Thank you ! Joel.....
I've been looking around at different clamping systems and yours is brilliant! The other methods all require big holes. Your method shows simplicity and elegance. Where did you get the clamps? My next welding table is totally going to use your ideas!
@@TheMetalist Thanks. I was looking at the Bessey HD clamps with removable pads, but the cheapest I can find those suckers is about $85 each! I'll check these out, hopefully they're a bit more economical.
@@Katoutwo Strange ... i also couldn't find them on the us Website, just in Europa! Maybe get some middle price clamps or some used ones on eBay that will work also.
More clamps: www.banggood.com/Heavy-Duty-F-Clamp-160x80300x80mm-Welding-Quick-Grip-F-Style-Woodworking-Clamp-p-1471415.html?rmmds=search&ID=41527&cur_warehouse=CN And the 250x80: www.banggood.com/Heavy-Duty-Throat-F-Clamp-250mm-x-80mm-Welding-Quick-Grip-F-Style-Wood-Work-Clamps-p-1307243.html?rmmds=search&cur_warehouse=CN
What’s the name of that adjustable measuring tool you use a lot with a scribe please. It’s like a slide rule in a way. I’ve been trying to find one. Thanks
Cool video and great idea! But you could slow down a little / no need to speed up this fast every part, it is just nice to see how things are getting formed :)
Jetzt, hab ich Die TEGO Bleche gesehen. Brutzel weiter.Hab heut die Neuen LILA E3 von Binzel bekommen. mal sehen wie die sind zum Braten. Die Schleifhilfe von WELDINGER kam auch.
Three questions: how thick is your welding table, how large are the holes in it and what diameter rod did you make the clamp hooks from? Great idea and build!
Thank you 😊 The baseblade is 6mm thick the holes are 10mm with a 12mm tap in it. That I'm able to screw something in it. And the Hock is a 8mm rod but a harder alloy like regular steel.
Wow! Very smart clamping system indeed. What make is your horizontal band saw? It really caught my attention. Powerful engineering hand there!! Keep it up
Your vice with the magnetic drilling machine is a brilliant idea. And then welding clamp very innovative idea. Great going
Thank you 😁
Absolutely beautiful design! Perfect for thinner welding table. Thanks much!
Thank you 😁
Love the sound of welding when movie is speed up. Sounds like an old video game. 😜
😅😂
Very useful DIY project, thanks for sharing it with us 🙏🏼
Dirk - your vids DO inspire me. Thanks.
Класс. Мастер! Супер сделано! Все на месте! Все с умом🤝
That big ass drill bit destroys. 👍👌🤘
Bold and Inspiring. Keep it up. From Spain
Thank you 🙂
FINALLY SOMEONE THAT KNOWS HOW TO MAKE A DIY VIDEO!!!! Thank You!!
Great idea 👍 I know it's a pain in the butt to put nuts on the ones I made
Your a lucky Guy, so many nice Tools from Fein! Greetings from Germany
Dankeschön 😊 hat mal mit einem Akkuschrauber angefangen und auf einmal .... 😅
@@TheMetalist Kann ich mir gut vorstellen, hat bei mir mit nem Blechknabber angefangen und schwups ist überall orange ^^
Я и смотрю чего у тебя в мастерской не хватает?!?!?! Точно этих железячек)) как ты догодался? Прям на все руки мастер)
Магнитов еще сварочных нету, видишь как мучается когда варит
Доктора Дью в голове.
Just a thought if you use a bolt on the end you could dual purpose the clamps or quadruple purpose by using a barrel nut you could make extension clamps with a pipe like a pipe vice. Flip the clamp around and
And make a spreader
Классно придумано.
Возьму себе на заметку.
Спасибо и удачи.
Он что магниты в отверстие прикрутил? А то я не допонял!
@@user-yp6ug7vq5u да это неодимовые магниты, чтобы струбцина не падала при снятии нагрузки.
One comment, beat the round bar towards back of vice, the movable jaw does not like getting beat on...cheers, lovely video , PB
I love the idea
Thank you 😁
Wow perron saludos de cd. Juarez mexico 👍👏👏👋
Thank you 🙂
This is a great idea. I like it a bunch. 🙂
Your clamps are great, but I LOVE your mag drill stand withe the vise. I am so copying/making that!
Thank you.
I Made a Video from my magdrill stand.
th-cam.com/video/lvhwczDgNqI/w-d-xo.html
Great Job.
Thank you 😁
That drill and bits are champions. Great video
That is a genius idea you did with your mag drill… Nice work with the clamps I have to remember that when I get my table
Thank you 😁
Magdrill stand Video is on!
th-cam.com/video/lvhwczDgNqI/w-d-xo.html
Man those are slick. Very nice. I'm also loving the stand you have for your mag drill. I'll have to try and make something similar for mine.
Thank you 😊
Magdrill stand Video is on!
th-cam.com/video/lvhwczDgNqI/w-d-xo.html
@@TheMetalist That is awesome
Great job. Hat off to you sir for the magnets. You had me wondering what it was all about but it all came together very well. You just need to create non magnetic spatter!!
great video
Thank you 😁
Top ! Super boulot
Thank you 😁
Excellent design and very well done ✅👍
Thank you 😃
I think you can realize alien baby's" Alien the eighth passenger"You have the style for..From the artist Hans Ruedi Giger
Una gran idea, gracias por compartir, saludos cordiales desde Santiago de Chile
Nice Job.
Thank you 😊
와우 좀 따라하겠습니다 ㅋ
Fireball Tools sells this for 3/16" thick tables. $16 ea.
Nice work..
It is really great idea especially using a small holes into the welding table
Thank you 😊
Genius dude
Thank you 🙂
Solid. Gathering fab ideas for my own table and this is rad. Either going 3/8 or 1/2 top and mag drilling holes similar to what you’ve done. This style clamp is perfect 🤟
How come you don't use coolant or cutting grease @1:37 with the drill press machine? Is it because the bit is tungsten carbide and doesn't need it? I really love the portability of the drill.
Love that hack!
Great job. I'll try myself. What is the size and thickness of the pieces you cut between 0:30 and 1:00 ?
Thank you 😊 its 8mm
The mag drill stand is brilliant!
Thank you 😊
who makes that ruler you're using to layout and scribe lines?
that man has skills
Thank you 😁
hi, why did you make hole of 10mm instead of 20 mm? to be more efficient to attach other machines? thks
and 2/ here why did you put "circles" on the big hole on the base blade instead of welding an squared iron plate? 6mm thick for the circle is that right ? thks a lot and GOOD GOOD JOB i'm dreaming on it to do the same but only one question : how i will do that to succeed like you ! :)
Finally a good idea I want to implement
Top de mais excelente!!!
Thank you 😁
Nice design. I'll be making some for my woodworking bench 😁
Thank you 😁 can't wait to see yours
Срочно, к доктору :) Он оценит эту идею, причем буквально!
Nice equipment. Very talented
Thank you 😊
Awesome video! The speed actually was really good!!
Thank you😊
Very stable design. If you have the standard (more or less) 5/8” holes though it’s obviously impractical. You’ve got me thinking how much.i like the stability of yours. At taller heights mine move off center quite a bit
Thank you. The holes are 10mm i guess its a 3/8 with a 12mm thread. My workshop is in the basement that why i needed a light #weldingtable. The baseblade is just 6mm thick.
It looks like you're welding straight to galvanized clamps? Did you prep them in any way? Or did the flap disk remove enough?
The flap disk remove enouth 😊
대한민국 어디든 아무곳에나 다 이런 아이템 한30년전부터 하고 있습니다 ㅜㅜ
Awesome idea. Interested in the style of magnets you used.
Thank you 😊
Awesome videos. Is there a chance that hook will booger up the threads on the table? I may be over thinking this. Thank you
It could be.....they are still ok till now
nice
Hola que tal que le pones en la base de la prensa
Hello, where did you purchase those magnets? I’m trying to look for the same ones. Thanks
www.amazon.ca/dp/B071ZKQ2X5/ref=cm_sw_r_cp_apa_i_msRCFbXYR7VZK
I found these. No matter the magnet, you may want to glue them in as well as using a fastener to prevent cracking. Rare earth magnets are very brittle.
oh, magnets, thats what those were?
You are amazing the things that you do im glad I subscribed to your channel 👏👏👏👏 what brill bit is that and what size
Rare Earth Cup Magnets
Come on man who has all those tools. Make something simple but good!
Всё хорошо. Но прошу всех кто сваркой работает: Ставьте пожалуйста фильтр. Уже глаза от зайчиков болят, а выключать не успеваю. Danke schön😁
Thx man awesome. Try a regular Skil saw and a carbide metal cutting blade if you haven’t. There only about $30
Great job well done 👍👍!!!
Thank you 😊
Genial.
Thank you 😊
Hi thank you for your videos they are super cool, I'm in France. What is the make and model of your band saw?
Thank you 🙂 its a Optimum opti saw s100g
Slick. Nice Job!
Thank you 😊
WOW - what a brilliant idea. Very clever hook and magnet solution that immediately solves the drop-in clamp with a relatively thin table top (6mm). Another idea of yours that I need to implement. If you don't mind me asking, what size rod did you bend to make the hooks? Thank you ! Joel.....
Thank you 😁 the hooks are 8mm the hole is 10mm with a 12mm tap
What kind of drill press do you have sir?! Great video 👌
Thank you 😁 its a Fein KBU 35-2
Mew Video Magdrill stand.
th-cam.com/video/lvhwczDgNqI/w-d-xo.html
I've been looking around at different clamping systems and yours is brilliant! The other methods all require big holes. Your method shows simplicity and elegance.
Where did you get the clamps?
My next welding table is totally going to use your ideas!
Thank you 😊 Thats regular Steel clamps from Bessey 120x250
@@TheMetalist Thanks. I was looking at the Bessey HD clamps with removable pads, but the cheapest I can find those suckers is about $85 each! I'll check these out, hopefully they're a bit more economical.
@@Katoutwo Strange ... i also couldn't find them on the us Website, just in Europa! Maybe get some middle price clamps or some used ones on eBay that will work also.
Clamps: www.amazon.com/MAXPOWER-2-Pack-Clamps-Ergonomic-Protective/dp/B07G2YBB32/ref=sr_1_32?dchild=1&keywords=K%26M%2BSPECIALTY%2BWELDING%2BTOOLS%2BUSA&qid=1595774520&sr=8-32&th=1
More clamps:
www.banggood.com/Heavy-Duty-F-Clamp-160x80300x80mm-Welding-Quick-Grip-F-Style-Woodworking-Clamp-p-1471415.html?rmmds=search&ID=41527&cur_warehouse=CN
And the 250x80:
www.banggood.com/Heavy-Duty-Throat-F-Clamp-250mm-x-80mm-Welding-Quick-Grip-F-Style-Wood-Work-Clamps-p-1307243.html?rmmds=search&cur_warehouse=CN
Учитывая трудозатрат и использованные станки, можно было не портить струбцыны, а изготовить из с нуля.
Nice work!
Can you tell me, magnet dimension?
25mm
Now that's awesome!!! Excellent job sir!!!
Thank you 😁
What’s the name of that adjustable measuring tool you use a lot with a scribe please. It’s like a slide rule in a way. I’ve been trying to find one. Thanks
Soon on my etsy shop
Help me understand what the magnets are for?
That the clamp US not Fallingbostel over
Cool video and great idea! But you could slow down a little / no need to speed up this fast every part, it is just nice to see how things are getting formed :)
Thank you 😁 not the first who mentioned it ... is noted 😄
Might be ok if you’ve got a table with a load of holes in it
Very nice.
Something tells me you will never have to worry about getting a job.
Not till now😅
Right on! Great tech idea! Hey what kinda msg drill is that? I need to get one! And would like to see the stand you made for it too!
Thank you 😊 its a Fein KBU 35-2 QW.
One of the next Videos will be a new stand for the magnetdrill. I've some new ideas for it 😁
Mag drill stand Video is on 😊
th-cam.com/video/lvhwczDgNqI/w-d-xo.html
Hi Metalist! What is the measuring tool used in your video is it a uniform measuring gauge? Thanks for the video
Yes its like a measuring gauge there is no specific name for it 😊
@@TheMetalist what make is it? I am in Europe and most I can find are flimsy looking
Jetzt, hab ich Die TEGO Bleche gesehen. Brutzel weiter.Hab heut die Neuen LILA E3 von Binzel bekommen. mal sehen wie die sind zum Braten. Die Schleifhilfe von WELDINGER kam auch.
Nice, ja die E3 nehme ich auch für Stahl und VA 😁 zünden mega gut
Hallo welches wig Schweißgerät ist das?
Rehm Tiger ACDC 230 ultra Digital
I can never have enough clamps when welding with my everlast welder. Good video.
Thank you 😊
Здорово молодец,что за сверла по металлу направляющие. Спасибо.
what are those round thingy you screw beneath the clamp?
Magnets
Three questions: how thick is your welding table, how large are the holes in it and what diameter rod did you make the clamp hooks from?
Great idea and build!
Thank you 😊
The baseblade is 6mm thick the holes are 10mm with a 12mm tap in it. That I'm able to screw something in it. And the Hock is a 8mm rod but a harder alloy like regular steel.
@@TheMetalist how far are the holes from each other boss
@@horaciosalinas8145 10x10cm
What's the name of that measuring tool on 1:06?
Очень интересная идея...
At minute 1:05 which kind of marking tool is that and where can i find it? Thank you
What's the make and model of that sliding ruler that you use. I think I'd like one of those much better than my sliding combination square
Inch or mm?
@@TheMetalist My bad both metric and imperial
Metric is not a problem. Which Country you are from? I could send you some over, if you want.
@@TheMetalist Yes sir, North Carolina USA. Just let me know what I owe ya. My email is gearmannc74@gmail.com .
Thanks,
Chris
Gearmannc74@gmail.com sorry mistyped it.
Thanks,
Chris
Does your magdrill magnet still hold on your table thru that vise base you made?
Not to the table but to the mag drill stand with the Vice.
Nice job
Thank you 😊
Доктору уже отправляли?
Сука, самое обидное что канал годный, но резать струбцины от bessey, это как сталь пластилин себе в уретру засовывать
Wat kind of welding did you use? Tig mig gas???
Shadrach ALi TIG
I use Tig and Mig. My Favorit it Tig 😊
Good work. may u send the tabel dimensions
Thank you 😁
Plans are coming
How thick is your table? Love these!
Thank you 😊
6mm but 8mm is also ok
Wow! Very smart clamping system indeed. What make is your horizontal band saw? It really caught my attention. Powerful engineering hand there!! Keep it up
Thank you 😁
Its a optimum Optisaw S100g
Where can I get that ruler you used to mark the plates. I usually use an adjustable square but that looks nice.
Good question do you have metric System, maybe i could orgenize you one!
جيد جدا
pretty neat, but what were those things you stuck in the bottom holes? magnets?
Yes, that they don't fall over
👍
Я думаю это Дью угорает и это он сам сделал 😜
It's good