You completely earned my subscription. I watched 8 videos so far......guess I'm not doing nothing for the next day and a half. Great skills man. Keep them coming.
Would like to know aside from using all scrap metal, what’s the cost of materials to compare to a store bout items. I’ve got more time then $$$. But I do have some many projects that my ADHD kicks in big time and I start a project only to jump on another one 😮😢
TIP: I couldn't believe how long-lasting and sharp a hacksaw blade could be until I got some Starrett blades at Azon for a couple3 bucks apiece. Nice set of holddowns. I particularly liked the angle blocks.
You are such a talented person, you have great ideas and I will be following you closely. Can you tell me the name of the Green liquid that you used to clean the metal and gives it a protective coating.If you could give it to me in English I would appreciate. And what size drill bit did you use to drill the holes. Thanks
@@GRINwood thanks a bunch for replying. i intend to also build a welding table using a sheet of 1.5mm mild steel over a 27mm hardwood table. but my plan is to make the holes in the table threaded for accepting m12 bolts. m12 i have found is the best compromise between strength and ease of fabrication/costs. also really nice that you can easily grab it into the standard drill 13mm chuck
Easier way, buy some cheap F clamps, cut the base off and weld a pipe or bar on to suit your hole size. I have heaps on my fixture table. Good video though.
Доброго дня. Скажіть, будь ласка, чи можна зварювальним апаратом такого плану як у Вас (TIG) зварювати метал без газу? Так як у вас на відео 3:33 Я так розумію що газ (аргон) потрібен для зварювання з присадочним прутком для захисту звірювальної ванни.
Ні, не можна. Без аргону метал швидко окисляється та бризкається, цим самим забруднює електрод і, як наслідок, дуга стає нестабільною. Присадка тут ні до чого
Olá, tudo bem! Gostaria de saber qual o comprimento e o diametro da barra de ferro que vc usou! Estou disposto fazer alguns grampos iguais aos seus e semelhantes no tamanho!
All free plans here:
drive.google.com/drive/folders/1636_O_7KVQ5hzWAhDXBornWnvxXfweba?usp=sharing
GRINwood shop:
www.etsy.com/shop/GRINwood
Support GRINwood:
PayPal: grinwooddesigns@gmail.com
I’m not finding the welding clamps in the drive folder. We’re they never uploaded or did I just miss them?
😊9
Olpopoo099999oo😊9😊o po9😊😊
Super smart idea with the wooden block for holding meanwhile drilling. Self centering. Brilliant.
Parádna práca a výborné video! Nech sa darí aj naďalej ! Pozdravujem zo Slovenska.
I love these videos. I spend most the time thinking 'what the hell is he doing?' then at the last minute it all makes perfect sense.
I'm happy you like it, Adam! 👍 Thanks for watching!
I’m exactly the same, 5 minutes of WTF? for a few seconds of enlightenment 😂
@@Smokeyr67 P0OKOOKOL😊😊ooloop9😊Oo
@@Smokeyr67 ooo😊Ooo ooo😊
@@Smokeyr67 😊900p
9:52 Very nice idea for clamps.
Мужик, ты гений! Спасибо тебе за твою работу, благослови тебя господь!
коли людина талановита, то вона талановита у всьому. дивлюсь без прискорень та перемоток до кінця. така творчість надихає. дякую.
Perfect job ,weldone bro from Israel ,thank you💯
Отличная идея со струбцинами! Надо себе таких 3-4 штуки сделать.
Thanks so much for your video mate, this will save me a heap of money and give me a great finished product
you are truly a jack of all trades, I really wish you would but some teach about welding content out, you are a real artist.
It will be many woodworking and combined projects in the future, so stay tuned. Thanks for watching!
You completely earned my subscription.
I watched 8 videos so far......guess I'm not doing nothing for the next day and a half. Great skills man. Keep them coming.
There is beauty in what you do. Thank you.
Amazing build. That was fascinating to watch!
Very nice 😊
Nice, easy, simple, wonderful clamps!
Thanks!
Дякую за відео.
Great videos. Making your own tools is extremely satisfying.
Would like to know aside from using all scrap metal, what’s the cost of materials to compare to a store bout items. I’ve got more time then $$$. But I do have some many projects that my ADHD kicks in big time and I start a project only to jump on another one 😮😢
I like this. Congratulation! Geant!
Great idea. Liked your processes. Great job.
Нет слов... Одни эмоции!!!
Всё генеальное - просто!!! Шикарно!!!👏👏👏
Very nice work.
Brilliant work, dude! Really fantastic ideas! 😃
Stay safe there with your family! 🖖😊
Thank you for your coments, my friend 👍 I'm happy you like it!
Дело мастера боится.. 👏
Otroligt vad du är duktig! En njutning att se dina filmer. Tänker varje dag på dig och dina landsmän, ber för er.
Thank you for your kind words, Kent 👍
TIP: I couldn't believe how long-lasting and sharp a hacksaw blade could be until I got some Starrett blades at Azon for a couple3 bucks apiece. Nice set of holddowns. I particularly liked the angle blocks.
Ви, крутий майстер!)
I like that table
Как всегда на высоте! Молодец!
Wonderful 👍
L'idée est vraiment bonne !!
Nice! Just what I needed. Thanks for this one!
Excelente trabajo Maestro
Vale la pena ver ésto. He aprendido!!!
Gracias.👍
you are great , very good job keep up the good work
Thank you Marco
Very clever!
بسیار آمزده و کاربردیست👍
Superbe fabrication
Terima kasih..
De toutes beautés
bravo genial
Желаю Вам, обзавестись токарным, пусть и небольшим. Сильно упростит многие операции. 👍
Très bon travail 👍
Amazing 👍
Great job 👌🏻 Greetings from Sicily buddy
Гениально !❤
Davvero incredibile. Vorrei capire di più riguardo questo tipo di saldatura.
Супер круто, функционал 👍
Awesome 👍
Годно)))!!
За зажимы-отдельный "лайкос")))
Hola muchas felicidades bastante ingenioso, gracias por compartir tu conocimiento y experiencia saludos desde Mexico.
Amazing, so useful.
Thanks
Tremendooooooooooo . . !!!!!!
Офигенная работа! 👍 Утащил в Избранное! 🤝🤝🤝
Amazing
Ý tưởng hay 👍
Спасибо за совет
Класно робиш!!! Видно що рукі з плеч під нормальним градусом)))
Maravilloso 😍 trabajo 👏👏👏
Wow!! Your Work is really inspiring. I did not find any thing on these in your plans. Are you planning to put them in your plans? Thank you!!
where can you find that rust remover/coating solution?
acid remover is Kleen strip metal and steel etch in the USA its phosphoric acid based. otherwise use apple cider vinegar my welding friend said.
What kind of liquid is it
Отличная работа и стол и оснащение 👍. Скажите отверстия какой диаметр на столе?
12мм. Спасибо
Buen trabajo lo felicitó una pregunta que Soldadura y maquina de soldar es ?
my welding machine is Патон АДИ 200S DC
🤔👍👍👍 молодец 🤝
A mini lathe and a drill press vise would have made short work of some operations.
You are such a talented person, you have great ideas and I will be following you closely. Can you tell me the name of the Green liquid that you used to clean the metal and gives it a protective coating.If you could give it to me in English I would appreciate. And what size drill bit did you use to drill the holes. Thanks
what is the diameter of the holes in the welding table ? is it 12 mm ?
Yes, it's 12mm
Yes, it's 12mm
@@GRINwood thanks a bunch for replying. i intend to also build a welding table using a sheet of 1.5mm mild steel over a 27mm hardwood table. but my plan is to make the holes in the table threaded for accepting m12 bolts. m12 i have found is the best compromise between strength and ease of fabrication/costs. also really nice that you can easily grab it into the standard drill 13mm chuck
❤️❤️❤️
Easier way, buy some cheap F clamps, cut the base off and weld a pipe or bar on to suit your hole size. I have heaps on my fixture table. Good video though.
Подскажите, диаметр какой оснастки ?
Как всегда, и предраться не к чему :) Спасибо.
Ну реально полезно и классно!!!
1:40 they are already protected - why you do this?
Крутяк 👍!
Jaką grubość ma stół???
8mm
Nothing fancy.
что за зеленая жидкость.... спасибо
what is that green zinc stuff in the bottles? I can't read Russian.
Phosphoric acid. One trade name is Rust Mort.
Hola que tal, estoy construyendo la mesa de soldadura y estos accesorios, me podrías apoyar diciéndome el tornillo que ocupas y el material?
Перешёл на фосфорную кислоту
Правильно, я давно понял что и дешевле и приятнее.
👍
Compliment
Do you never use filler wire for TIG welding? That's how it seems. Great video.
I don't use it when I weld thick metal or details fits close. In other situations I weld with filler rod
👍👍👍
Доброго дня.
Скажіть, будь ласка, чи можна зварювальним апаратом такого плану як у Вас (TIG) зварювати метал без газу? Так як у вас на відео 3:33
Я так розумію що газ (аргон) потрібен для зварювання з присадочним прутком для захисту звірювальної ванни.
Ні, не можна. Без аргону метал швидко окисляється та бризкається, цим самим забруднює електрод і, як наслідок, дуга стає нестабільною. Присадка тут ні до чого
@@GRINwood Я Вас зрозумів, дякую за відповідь)
Ваші відео багато підказали хороших порад.
Olá, tudo bem! Gostaria de saber qual o comprimento e o diametro da barra de ferro que vc usou! Estou disposto fazer alguns grampos iguais aos seus e semelhantes no tamanho!
👏
Работа шикарная конечно. Но резы по ходу не болгаркой... Где ленточная пила?) прям четкие углы и 90 и 45 градусов... Явно не болгаркой)))
Turiu klausima graštus pac galandate?
magnets? 🤔
👍👍👏👏
круто вообще!
тот случай когда выработав педантичность в изготовлении ,сделать абы как уже не получится.
Доброго дня, а ви звідки?
Доброго дня. З України. Дякую, що дивитесь 👍
@@GRINwood Я також, і дякую за твої відео, все класно,я залип на твої відео, так як багато цікавих нюансів показуєш. Тобі дякую за відео.
А мне один марикон говорил, что это подрезы - сварка аргоном без присадки. ГОСТу не соответствует.
😃😃😃