Wow, yet again you've come through for me without me doing a thing. The two projects I'm doing the body and paint on, start to finish have countless dents and dings. I've looked at the Vevor dent puller kit for about 4 weeks, but just wanted to be sure I wasn't getting in over my head with it. Just like everything else I have learned so far about the jobs I need to do, you are the guy who laid it out for me. So simple, straightforward and super easy to understand- your vids just cannot be beat. If my projects turn out okay in the end I will give the credit to your channel, because like I said, the only stuff I've watched, understood, and genuinely felt comfortable with, is the technics and skills I've picked up from your videos. I'd recommend anybody to watch your vids several times to really absorb all the great information in them.
Thank you! This is what I've been waiting for. My beloved 37K miles Honda Element was wounded by a "Smartphone with a 24-year old Girl attached." Her insurance company paid up, but since I used to fix-up old cars, I decided to give it a go. I found good rear fender and bumper cladding, and a tail-light, but these old bones just haven't gotten around to pulling the inner steel fender back to specs. Now the whole thing can be completed in my carport with genuine enthusiasm. Liked and Subscribed.
I have one of these. You had it on the wrong setting. The little triangle on the dial is for the triangle attachment. But I find you might need it a little hotter sometimes. That setting is for metal shrinking. It’s a good tool, I’ve used it to fix a few classic car panels that people had damaged almost beyond repair from welding…. And I’ve no previous experience with this sort of tool, so it’s easy to use.
Hey Brian am from the Caribbean and I bought this exact model and was delivered last week. Great product so far, I noticed you turned the dial up higher than I did and the triangle tips didnt burn. I guess I had it set lower. Thanks for the video
I bought a few 1/2 inch impact sets from this company through amazon. I had a minor issue with the order, but they had really great customer service and corrected my issue. I would buy more items from them in the future.
I bought one of these a while ago, fantastic tool. I don't know how i have gone so many years welding washers on and using a slide hammer lol! I used to use all the top equipment back in the late 90s, god i feel I'm getting old lol!
Finally something i am looking for. Was watching fellow body man screwing drwall screws into metal Looked horrible. Bought stud welder but this machine does amazing joband is available on us market and very affordable. Thank you for sharing
Great video! Did not even know that this tool existed. I don't do a lot of body work on motorcycles, but for the price, it's smart to have it around. For me, VEVOR is a hit and miss company, like Harbor Freight. I purchased a small type mobile welding table and I had to do a ton of customizing just to make it work as advertised. However, this dent puller is worth a try. Thanks for the video, much appreciated!
I have one and it’s 2 years old already I added the maxi ground and the tips from it as well you can also add a big bolt and make the point sharp and pointy and it works better those gold tips some times suck but the equipment is worth the money !!
I haven't had a chance to use one of these all-in-one stud welder/pullers yet. I've used a regular stud welder and slide hammer to pull dents a lot. It definitely works. But it is time consuming. And you can go through a lot of studs quickly. I'm usually able to reuse the studs at least 2-3 times. Sometimes more, sometimes less. But it still takes a lot more time than an all-in-one setup like this. One of the body men who used to work with me had an older version of this setup. But it didn't have any removable attachments. It was just a weld-on slide hammer. I've definitely gotta get one of these. Or maybe find somebody who has one that I can try out. It's a major time saver and it leaves a better finish than a regular stud welder
Great review, thank you very much. I got the paintless dent repair kit from Vevor, didn’t use it yet but quality is good. Maybe I’ll buy this one too, thanks again for all your explanation and vids about peeping and painting a car at home
i try to pull dents with a paintless dent puller first then i use stud welder to fix on studs and pull them with a rack and turnbuckels where i can pull largers areas slowly with a number of turnbuckels. Sometimes i use airbags or jacks and push dents out from the inside. i always try to pull the dent without damaging the paint first. about 30 to 40% of small dents i have pulled without damaging the paint
I bought the $250 vevor yellow stud/dent puller welder the one on wheels the big one I just tried it. At first I was not impressed but it did weld the wiggle wire good and I pulled a seriously bad dent it was beyond fixing so I asked a lot of the machine. That said it needs some upgrades. The ring dispenser is a must. And a clamp. Maybe better gun? Idk I’m on the fence. I hope you can teach me something. I like regular stud gun better but this is a different tool.
My question and concern about using this tool is all these spot weld will make mini burn marks on back side of a panel.... usually it take hundreds of pulls on larger dent.... many times the back side of quarter panel has limited access for painting... and I don't like the idea of just using cavity wax.. to cover the back side of these spot welds. Many times Pdr is better choice.
I was using mine on a old 57 Chevy. Was having a hell of a time it sticking. Some places the wiggle wire worked but others it didn't. Would grab metal well. Please advice.. thank you
I bought a stud welder last year or the year before it hasn't came out the box yet 😅. I need a good compressor and guts to sand down down a car a paint it and I have about 8 cars in my yard.
Hello Brian. Nice year end video. I actually bought something similar to this tool. It works with great success. Great explanation of all the functions. Have a healthy start of your new year. Enjoy some time off.
I assume this is for newer cars that have super thin metal and or plastic. Does it work on a 1989 gmc suburban door panel?? Much thicker steel on 89 gmc.
I have watched so many videos u have made I've painted about 10 cars in the last couple of years I'm getting ready to paint my own car last night I made the choice and ordered the devilbiss DV1 B I hope I made the right choice so now I will be painting with my DV1 b and clear coat with my anest iwata I'm also going to buy an electric sander that hooks up to shop vac I was wondering if u could lead me in the right direction for what brand of paint and clear coat I should go with the color is Dark Brauma jewel metallici want it to turn out very good going to put alot of work into the prepping as far as sanding filling little dents and cleaning and of coarse taping I will be doing all of the work myself I have a tent built out of plastic in a buddy's shop with a fan and a slinky looking tube for exhausting the paint fumes out I'm nervous but also wanting this to be my best paint job ever I have poured concrete for over 30 years so I get laid off in the winter time so now is the time to paint for me I am going to put my life and soul into this paint job I also would like to tell u thanku for all of the videos that u have made I have spent ma y hours watching them I learn something new each time I watch one u r an unbelievable painter a true craftsman I have watched many paint videos from different men but yours always seem to make the most sence if I Remember right u r a gym teacher by day and painter by night what a stud I take my hat off to u I do many jobs to make ends meet myself but painting is something I love to do your videos helped me alot that and fn things up lol ok sorry for rambling I just wanted to tell u thanku and if u could send me in the right direction for what kind of paint and clear coat I would really appreciate it thanks again for all of your hard work u r a master of the game
Just unboxed one. Wouldnt ground tried new metal, tried diffrent power supply, the keys go into a slot 1/8 of an inch too big.. i tried directly clamping the ground still not enough to hold a new key under its own weight. Tried directly into diffren wall sockets sending it back to amazon
So many things to like about this tool. I already have a Dent Fix Shark. Does anyone know if these attachments would be compatible with the Shark? I really like the triangle heads and the teardrop pins. I paid a lot for the Shark years ago.
I don’t think centre punch would be great to get rid of high spots because its too sharp and leaves a pit in the sheet metal which would be really hard to pull
How about using super thick silicone shapes, ball or rectangle, to stick inside the door panels and blow them up to push plastic or metal out. No pulling.
Does anybody have any idea what the difference is between this Vevor Pro Spot (reviewed) vs the Vevor GD90e? They both seem to do the same thing and are both 3000 watts. I've not yet found a comparison and can't quite discern the difference. Any help would be appreciated.
Curious if this would handle a thicker steel like a 70's pickup. The bed floor on my 72 c10 is all kinds of dented everywhere. I figured I'd have to just take a torch and heat up each dent and use a body hammer to tap them out.
Does this product work on aluminum? If not any chance doing something for pulling dents on aluminum? I know product exists but what is a good affordable one?
I wish i had this when i first started doing autoboy. I could only use a stud gun at home and it would take forever to do a job at home. My boss would never let me borrow the spot pro.
Hey, you said on another video that vevor had been using clips from your videos to sell their products. You also said you would never use vevor products? Wtf is this then? 🤔
Thanks for the instructional video. You weren't kidding about the lack of instructions with this thing. I appreciate it.
Wow, yet again you've come through for me without me doing a thing. The two projects I'm doing the body and paint on, start to finish have countless dents and dings. I've looked at the Vevor dent puller kit for about 4 weeks, but just wanted to be sure I wasn't getting in over my head with it. Just like everything else I have learned so far about the jobs I need to do, you are the guy who laid it out for me. So simple, straightforward and super easy to understand- your vids just cannot be beat. If my projects turn out okay in the end I will give the credit to your channel, because like I said, the only stuff I've watched, understood, and genuinely felt comfortable with, is the technics and skills I've picked up from your videos. I'd recommend anybody to watch your vids several times to really absorb all the great information in them.
Thank you! This is what I've been waiting for. My beloved 37K miles Honda Element was wounded by a "Smartphone with a 24-year old Girl attached." Her insurance company paid up, but since I used to fix-up old cars, I decided to give it a go. I found good rear fender and bumper cladding, and a tail-light, but these old bones just haven't gotten around to pulling the inner steel fender back to specs. Now the whole thing can be completed in my carport with genuine enthusiasm. Liked and Subscribed.
I have one of these. You had it on the wrong setting. The little triangle on the dial is for the triangle attachment. But I find you might need it a little hotter sometimes. That setting is for metal shrinking.
It’s a good tool, I’ve used it to fix a few classic car panels that people had damaged almost beyond repair from welding…. And I’ve no previous experience with this sort of tool, so it’s easy to use.
Hi! Does it work on aluminum panels?
I bought one of these and use it at work all the time. Iam quite pleased with it.
Using the automatic center punch is a great idea 😊😊
Hey Brian am from the Caribbean and I bought this exact model and was delivered last week. Great product so far, I noticed you turned the dial up higher than I did and the triangle tips didnt burn. I guess I had it set lower. Thanks for the video
I bought a few 1/2 inch impact sets from this company through amazon. I had a minor issue with the order, but they had really great customer service and corrected my issue. I would buy more items from them in the future.
I bought one of these a while ago, fantastic tool. I don't know how i have gone so many years welding washers on and using a slide hammer lol! I used to use all the top equipment back in the late 90s, god i feel I'm getting old lol!
Finally something i am looking for.
Was watching fellow body man screwing drwall screws into metal
Looked horrible.
Bought stud welder but this machine does amazing joband is available on us market and very affordable. Thank you for sharing
I own a number of VEVOR tools; each has been purchased sight unseen. I have always impressed as to quantity of the tool for the price!
Remember seeing this system used on Wheeler Dealers some years back, impressive results.
Great video! Did not even know that this tool existed. I don't do a lot of body work on motorcycles, but for the price, it's smart to have it around. For me, VEVOR is a hit and miss company, like Harbor Freight. I purchased a small type mobile welding table and I had to do a ton of customizing just to make it work as advertised. However, this dent puller is worth a try. Thanks for the video, much appreciated!
I have one and it’s 2 years old already I added the maxi ground and the tips from it as well you can also add a big bolt and make the point sharp and pointy and it works better those gold tips some times suck but the equipment is worth the money !!
WOW!!! Any thing to make a job more simple!!
Seems like a great addition for any body work. For a novice like me any help is most welcome
I haven't had a chance to use one of these all-in-one stud welder/pullers yet. I've used a regular stud welder and slide hammer to pull dents a lot. It definitely works. But it is time consuming. And you can go through a lot of studs quickly. I'm usually able to reuse the studs at least 2-3 times. Sometimes more, sometimes less. But it still takes a lot more time than an all-in-one setup like this. One of the body men who used to work with me had an older version of this setup. But it didn't have any removable attachments. It was just a weld-on slide hammer. I've definitely gotta get one of these. Or maybe find somebody who has one that I can try out. It's a major time saver and it leaves a better finish than a regular stud welder
Oh great now u went and done it! Another “must have tool” to my shopping list! Thx for sharing
i have that exact one, works awesome, also the pdr 1000 for very small dents👍
You did a great video. I definitely learned something. And Im a metal fab guy. This dent welder had me kinda stumped. Thanks brother.
Great review, thank you very much. I got the paintless dent repair kit from Vevor, didn’t use it yet but quality is good. Maybe I’ll buy this one too, thanks again for all your explanation and vids about peeping and painting a car at home
i try to pull dents with a paintless dent puller first then i use stud welder to fix on studs and pull them with a rack and turnbuckels where i can pull largers areas slowly with a number of turnbuckels. Sometimes i use airbags or jacks and push dents out from the inside.
i always try to pull the dent without damaging the paint first.
about 30 to 40% of small dents i have pulled without damaging the paint
I have been watching the Mechanic Han channel use something like this for a while. Thanks for showing where we can get it.
I believe those are carbon rods. They are used when you have oil canning to heat up a spot on a panel instead of using a torch.
The guy with the garage noise channel uses this all the time with great results
At 10:35 it appears the ground cable nut is loose. Thank you for sharing.
I bought the $250 vevor yellow stud/dent puller welder the one on wheels the big one I just tried it. At first I was not impressed but it did weld the wiggle wire good and I pulled a seriously bad dent it was beyond fixing so I asked a lot of the machine. That said it needs some upgrades. The ring dispenser is a must. And a clamp. Maybe better gun? Idk I’m on the fence. I hope you can teach me something. I like regular stud gun better but this is a different tool.
I love stuff like this. It’s in my Amazon waiting it’s turn.
I've been watching this tool. Good looking out, Brian.
hello brain the tool look and work good.but what about the lenght of the ground cable and the gun.that is the most importent about the machine?
My question and concern about using this tool is all these spot weld will make mini burn marks on back side of a panel.... usually it take hundreds of pulls on larger dent.... many times the back side of quarter panel has limited access for painting... and I don't like the idea of just using cavity wax.. to cover the back side of these spot welds. Many times Pdr is better choice.
I was using mine on a old 57 Chevy. Was having a hell of a time it sticking. Some places the wiggle wire worked but others it didn't. Would grab metal well. Please advice.. thank you
I bought a stud welder last year or the year before it hasn't came out the box yet 😅. I need a good compressor and guts to sand down down a car a paint it and I have about 8 cars in my yard.
Brilliant! Thank you for sharing this informative video. Greetings from Madang, Papua New Guinea!
Salvage Rebuilds UK Chris is a master with that tool although he doesn’t talk about settings on the machine
Hello Brian. Nice year end video. I actually bought something similar to this tool. It works with great success. Great explanation of all the functions. Have a healthy start of your new year. Enjoy some time off.
Hi Brain does no one use a body file anymore to pick out highs and lows.
How fantastic!
Is there a 240v one I wonder?
Great tips on this awesome tool! Thanks for the heads up Brian.
I assume this is for newer cars that have super thin metal and or plastic. Does it work on a 1989 gmc suburban door panel?? Much thicker steel on 89 gmc.
Great review 👏🏼 Your explanation always on point 👌🏽
Oooh I like mmm I'm getting one!
Great Video! Thanks Brian!
How would this work on older (60's 70's) vehicles with thicker, heavier sheetmetal than current vehicles?
U would be surprised but obviously it's not gonna pull out really big crimp spots of metal but it does work great !!!
Do you have a video showing the demonstration?
Nice review😊
They do a nice diesel van heater has many uses elswhere
please use this unit in a future vid and show us ALL the attachments n what it can do !!! 😃👍👍👍👍👍👍👍👍
What basic dent repair machine would you guys recommend besides the stud
Great video 👍very informative
I have watched so many videos u have made I've painted about 10 cars in the last couple of years I'm getting ready to paint my own car last night I made the choice and ordered the devilbiss DV1 B I hope I made the right choice so now I will be painting with my DV1 b and clear coat with my anest iwata I'm also going to buy an electric sander that hooks up to shop vac I was wondering if u could lead me in the right direction for what brand of paint and clear coat I should go with the color is Dark Brauma jewel metallici want it to turn out very good going to put alot of work into the prepping as far as sanding filling little dents and cleaning and of coarse taping I will be doing all of the work myself I have a tent built out of plastic in a buddy's shop with a fan and a slinky looking tube for exhausting the paint fumes out I'm nervous but also wanting this to be my best paint job ever I have poured concrete for over 30 years so I get laid off in the winter time so now is the time to paint for me I am going to put my life and soul into this paint job I also would like to tell u thanku for all of the videos that u have made I have spent ma y hours watching them I learn something new each time I watch one u r an unbelievable painter a true craftsman I have watched many paint videos from different men but yours always seem to make the most sence if I Remember right u r a gym teacher by day and painter by night what a stud I take my hat off to u I do many jobs to make ends meet myself but painting is something I love to do your videos helped me alot that and fn things up lol ok sorry for rambling I just wanted to tell u thanku and if u could send me in the right direction for what kind of paint and clear coat I would really appreciate it thanks again for all of your hard work u r a master of the game
Video on hail repair would be great!!! Happy new year! Cheers.
Lol yea I figured as much; I'm just hoping Brian has some magic tricks to minimizing the amount of fill@slomo7118
Need more of these dent pulling vids
where do you get that stud welder and how much?
amazon for less $300
Is this a tool that could be used on hell damage. If so I'd love to see a video on it.
Just unboxed one. Wouldnt ground tried new metal, tried diffrent power supply, the keys go into a slot 1/8 of an inch too big.. i tried directly clamping the ground still not enough to hold a new key under its own weight. Tried directly into diffren wall sockets sending it back to amazon
So many things to like about this tool. I already have a Dent Fix Shark. Does anyone know if these attachments would be compatible with the Shark? I really like the triangle heads and the teardrop pins. I paid a lot for the Shark years ago.
Does the car battery have to be disconnected?
Can you make a video of fixing small hood dents with this machine?😊
I don’t think centre punch would be great to get rid of high spots because its too sharp and leaves a pit in the sheet metal which would be really hard to pull
It works perfect. Try it
@@PaintSociety how would you remove the pin size dent caused by the sharp end
That sure beats studs
Thanks. Ima order me one. Not bad on the price either. 👍
Pro quality video.................Bravo!.......................
Precio del spotter y donde se puede pedir
How about using super thick silicone shapes, ball or rectangle, to stick inside the door panels and blow them up to push plastic or metal out. No pulling.
I will stick with PDR. After watching a talented PDR tech work his magic on 3 of my mustangs I won't go look any further.
Awesome video thanks for sharing.
Does anybody have any idea what the difference is between this Vevor Pro Spot (reviewed) vs the Vevor GD90e? They both seem to do the same thing and are both 3000 watts. I've not yet found a comparison and can't quite discern the difference. Any help would be appreciated.
Would this be better than a MAXI or should I stick with it?
Where to buy this machine. And possibly price
Tanks for you sent me product how much price
Happy New Year’s dear
Wow, great tool.
I think so too!
Curious if this would handle a thicker steel like a 70's pickup. The bed floor on my 72 c10 is all kinds of dented everywhere. I figured I'd have to just take a torch and heat up each dent and use a body hammer to tap them out.
Great great video im getting THIS!!!!
Great review and Tool Tip.
Does this product work on aluminum? If not any chance doing something for pulling dents on aluminum? I know product exists but what is a good affordable one?
Thx so much, Blessings!
Good video thanks
I wish i had this when i first started doing autoboy. I could only use a stud gun at home and it would take forever to do a job at home. My boss would never let me borrow the spot pro.
You might want to grind off the spike on the center punch
Awesome 👍👍👍👍
I love Vevor chineseium tools :)
I just bought a SH-7500 and I just can’t get it to ground and like everybody is saying no instructions or troubleshooting tips
Really like what I see!
I have a question sir, when using this machine, do you have to disconect the battery?
Yes you should
I’m not a professional body man, that sounds funny coming from an expertise painter
Good video, thanks!
Nice review
Excellent!
Pretty slick
great job thanks
I have it and its awsone well bigger model
Hey, you said on another video that vevor had been using clips from your videos to sell their products. You also said you would never use vevor products? Wtf is this then? 🤔
Minds change. This vid sold me.
I would have liked to have seen what the dent looked like before and after the pdr guy, before you sanded it down.
What does this unit cost?
Description
Thanks for a Great video. My mom will never know how Bad I crashed Her Car Now! Do You also have a Video on how to get out out Jail for a DUI?
Link to the tap down hammer?
Check description. Just added it
Nobody has said anything about the 20amp breaker 15does not do well
What did you pay
You should be able to do this entire demonstration without saying a word