FLOWMASTER SUPER 10's (INSANE DIFFERENCE)
ฝัง
- เผยแพร่เมื่อ 29 ก.ค. 2021
- Hey guys! In this video I reveal my new exhaust set-up. I replaced my Flowmaster 40 Series mid-mufflers with Flowmaster Super 10's and additionally had Carven Exhaust Tips welded on as well. The Super 10's do not disappoint and the tips added a beautiful new sound to the Charger. These Carven Tips are meant to be clamp ons, but I loved them so much and had to have them; my exhaust shop was able to make it work and use a larger diameter pipe after the rear axle. Watch in full to get a full view if a similar set-up would be right for your car! Enjoy!
FOLLOW ME ON INSTAGRAM: / brannautomedia
MY GEAR:
Canon Eos M50 w/15-45mm Kit Lens: amzn.to/3tKaTeN
USB Dual Battery Charger: amzn.to/3qLEina
Joby Gorilla Pod: amzn.to/3Knf2vf
Audio🎵 artlist.io/Anthony-1946374
Disclosure:
*As an Amazon associate I could earn from qualifying purchases. I only recommend and review products that I truly believe are the top in the market and ones that I have used myself.*
Disclaimer:
* I am not responsible for any harm, injury, loss of any type from using any product that I recommend. Please read carefully, all of the instructions and manuals from the manufacturer. This channel is specifically to inform and excite fellow car enthusiasts for entertainment only.*
#super10 #carven #dodge - ยานยนต์และพาหนะ
Mine had 3.75" pipes. Long tube headers, High flow cats, H-Pipe, two original 40s, no resonators, and it sounded like a 5.0HO 80s Mustang. It was awesome.
I've had the same Flowmaster Super 10 for the last 10 years. It was on my 2004 Dodge Ram Hemi, sounded great, and everyone who would hear it coming would expect an old muscle car. On my 2020 Ram with a Hemi, it sounds insane. The idle sounds like a Hellcat, W.O.T. sounds amazing. Well that's if you like unadulterated aggressive sound. The best muffler I ever bought.
Yup I think I found the sound I've been searching for. Been looking for months and kept hearing the higher pitch "deep" sounds. This is perfect.
The part about undesirable sounds from the rear got me so good😂😂😂
They sound great I have a eclipse . I hope to see with a 3 inch tip out 2 in with the 10s muffler
This is what im doing on my f150 5.4, going to run a single 2 in 2 out super 10, going to sound really good.
Perfect sound!
I run a mid muffler delete and rear muffler delete. Had the 40 series flow master installed in the mid duals out the back. It’s 3 years old and has no leaks and has gotten a nice deep sound too them finally. Stock tips . 2013 challenger R/T. With a K/N drop in air filter. But I have been in the fence about getting the super 10’s . Also getting different tips I like the quad look . Was thinking flowmaster burnt chrome look they have. Thanks for the input bud . I think I might jump over .
No problem! I hope you end up doing it! The super 10s were a good switch!
I got a 83 T.A with a built 355 mild racing cam and lifters bored over .30 Holly performance intake Holly 750 4 barrel carburetor hooker headers what duel exhaust should I run from the hooker headers mine was stonen sucks but what mufflers sound the best?
I have dual flow masters with rear resignator delete sounds Awesome when you hear a Lion roar in the jungle you run😊😊😊
Great video!!! Sounds amazing!
Thanks man! I'm so happy with out it turned out
How will the super 10 sound on a 4.7l Toyota Tundra / sequoia
Super 10’s are the best!!! 💯🔥
5” tips, super 10 on 19 ram (classic) 5.7…. All i need is long tube headers 💪🏾💨😮💨
I got the flow monster knockoff’s on eBay for $36 bucks a fraction of the cost of a flowmaster I have them on a 2010 3.5 V6 Honda accord with N1 style mufflers on both sides I use the flow monster as middle one I removed the third dummy at the cat with no O2 sensor and I gutted all three of them the car is definitely more responsive and free flowing i installed mini catalytic converters on my downstream O2 sensors to keep the CEL off
Anyone know of the part #?
40 series!!! All day!! 2018 Dodge Challenger Scat Pack!
Nicely done Sir I have a dual set up with 2 super 10s with X pipe got something in the works this month n June hopefully
Thank you!
@@BrannAutoMedia no problem at all Sir
I'm gonna get dual super 10s with dual outlets for my 2006 pontiac grand prix gxp it will also have zzp down pipes and 4 slp exhaust tips
Sounds like a sick setup!!
The smaller the muffler the louder it is because it has less resistance to exit. Or something like that lol i got Atak on my vette
Thanks for making a quality video of both of these mufflers! Have you noticed any drone and do they get louder after some break in?
They do have a little drone when sitting at a certain rpm, and yes they both do get louder after break-in!
@@BrannAutoMedia I want this on my 16 V6. Is the drone annoying with the res delete? Thinking if I should stick some vibrant bottles on in place of stock resonators with the 10s. Also how does it sound with non aggressive driving in town. 45-55mph occasional lights.
@Brann Auto Media how given that neither are filled with fiber and are chambered?
@@patgraeme775 it did change sound after running them for a little bit, and if you see on flow masters website, there are a couple of v shaped walls/baffles in the muffler creating a chamber
@Brann Auto Media correct but no fiber glass. Unless you are arguing that some how the steel is breaking down ?
Nice sound, I actually like drone and vibration in car, I have original 40s dumped under my axle on my Challenger rt. Do you think I would lose any of my interior drone/vibration by switching to the super 10s? Also do you think it would still be as deep sounding? My car vibrates the ground right now it is so deep. Thank you for your help!
Hey! 10's would definitely make it more towards the raspier side compared to my 40's that had a deeper tone before. I don't know if the drone would go away, it's tough to guess
@@BrannAutoMedia Thank you very much for your reply, I think I will just stay with the 40s then, when I am on the highway they literally vibrate all of my mirrors, lol. May the power of Chrysler compel thee
I like the 40s. 10s are too clappy.
What would be the after result if you add the 10’s if you already have straight piped ?
I would think that it would definitely sound similar to mine, depending on your model. I mean my car is essentially straight piped after the cats, minus the Super 10's. I have nothing else after the Super 10's to muffle any sound.
I went from mid delete, to res delete straight piped, was loud and dirty as fk (which I kind of liked)... so I then slapped some Super 10s in the mids, sounded cleaner and did lessened the loudness a bit, like no longer dirty and raspy... but I'm starting to miss that straight pipe dirtiness now. Might sell the super 10s 😄
What means "cats"? I Just wanna install my super 10, but i dont know if its better the Long pipe after super 10 or short , sorry for my bad english
05 6.4L hemi magnum with SLP loud mouth mufflers, X-pipe, high flow cats. At @ 2k rpm (70mph) the drone was unbearable, and every piece of plastic inside resonated like an angry bee. 60mph no worries. 80mph no worries. 70mph ack!
I have one on my optima and I love it
I have the EBay knock off the Flowmonster for a fraction of the cost $37.bucks on a 2010 Honda Accord coupe 3.5 V6
is it the super 10 one @@rosieclark3661
I can't put a super 10 on a 2013 dodge charger sxt can I? The muffler that's on it right now is offset
They might make the super 10s with different inlet and outlet diameters! If you can find one I would highly recommend them!
Try talking to your local exhaust shop. They might be able to customize something for you! Pretty much from the mid mufflers back is all custom work for me! They put in the The flowmaster super 10s as the mid mufflers and then custom work back and ended up welding on my tips as well, even though they were meant for bolt on, I wanted those exact tips so they made it work!
Yea u can I had a sxt and put one on
What is your kit because I about to buy everything for my sxt
What kit are you referring to?
I had an exhaust shop do a custom setup, took off mid mufflers and rear resonators. Replaced the mid mufflers with the pair of super 10s, and just pipe out the back after that, straight out with the tips
What muffler shop did you go to ? I’m in lil Rhody myself and want to put the 10’s on.
Lou's custom on Newport Ave
@@BrannAutoMedia Thanks. Too far away but everything is in Rhode Island. 😂
I went to Lou’s yesterday and he put on 2 Magnaflow’s. Very good recommendation. Those guys were hilarious and they did some great work. ☮️
@@delivertilidie8356 Awesome! Glad I was able to help! Those dudes are funny for sure!
Bigger muffler deeper sound.
Can i put super 10 on my 2022 Chrysler 300 without muffler delete sir….
I don't know how the 300 is set up, but the super 10s replaced my MID muffler, and we're recommended by the exhaust shop, to do them in the middle rather than replace the rear resonator with the super 10s. For sound quality they recommended that...they do them all the time, and also I heard plenty of videos of having them replaced as the mid muffler and that's the sound I was going for, I removed the rear resonators on mine and have it go straight back because I wanted a little more volume. I do have a little bit of drone at certain rpm's but the sound is great. I believe that the purpose of the super 10 is to replace the actual muffler itself, and if you don't want drone, you could probably keep the rear resonators
Gotta stress the hugh difference between having cats vs no cats
100% no cats. Way better
So you mean, once I install my Carven 5" tips on my BORLA ATAK, it will get louder? LFG!!!!
What part number was ur flowmasters
Hey! Part number for Super 10s or the 40 series? I will have to look it up.
No for the super 10a
I have a 06 charger rt tryna find ones that fit
@@natebingreenin780 I got mine through an exhaust shop and they ordered mine for me, but Autozone stocks flowmaster mufflers, so maybe they can look up the part number for your model year? I don't know if its the same inlet and outlet shape for the 2006 Chargers. Sorry I couldn't be more help!
Tens sounds good as hell, I have 44s and they suck
Thanks man! Yes I'm so glad I made the switch.
Thanks for this comment, I was considering 44s !
Really what do you have them on I in in the debate on which ones I want
Which flowmaster is legal in Pennsylvania?
I am not aware of the legality of replacing your exhaust parts in Pennsylvania, I would double check your local laws for modifying your vehicle, some states are a little more picky than others when it comes to exhaust modification! Some of the flowmasters I don't think would draw any attention, but on the box some of them say they are for off-road use only, which hints that they would probably attract the police for sound more.
Well I live Pennsylvania, and as long you have some type of muffler installed you're good 👍
@@jamescooper5183 wouldn’t flow masters be considered a muffler?
@@lb3843 Yes,it would be considered a muffler, I had just about every flowmaster made on all my cars and they pass state inspection no problems…
WHO CARES….. DRIVE IT LIKE YOU STOLE IT!!!!
Get rid of the carven, it’ll sound so much more aggressive. Slight drone from 74-77 in eco
Even if it did, I still paid good money for the tips because I loved them so much haha maybe if something happened to them and I had to take them off I would leave them off! Thanks for the heads up!
@@BrannAutoMedia wait you don’t have carven mids? No don’t get rid of the tips they look and sound great. Maybe I wasn’t paying attention b/c my daughter was talking to me but I thought your diagram was saying you had carven mid mufflers. If not, yea get rid of the mids with super10s at the rear to replace the resonators… you’ll live it, neighbors will hate you especially with a cold start 😂
(Speaking from experience)
Gonna make her a little louder with kooks long tubes and a Magnuson 😳
@@hybridstudios39 yeah I have the super 10s as my mid mufflers, and it's just straight out the back after that with the carven tips! It's loud now that everything is worn in!
the 10 series are loud but the drone is very annoying I had them one time on my 2v mustang I took them off
i was thinking about getting these is there something that sounds better while still loud for 2v stangs?
@@TBplaysPC I heard the original 40 series are a little louder then the super 44s I jave the super 44s I want to purchase the original 40s or maybe even go loud mouths
@@TBplaysPC and also when I had the 10series I've noticed a small lost in power.these mufflers are for high hp motors is what I was told
@@linoacuna4283 I think I may be going with slp loudmouths
But mine has no cats on it I hope it's going to quiet it a tiny bit from being straight piped lol
S10 sounds much better 👌
How would this sound on a Honda Civic? I'm really looking for that thousand angry bumble bees trapped in a coffee can sound.
Can’t tell if this is a troll or not haha, but I have never heard what a Flowmaster set up sounds like on a 4 cylinder Honda, don’t know how the tone would be.
I'm not trolling, just some light hearted humor poking fun at the ricer car crowd. I actually found your video very helpful as I'm looking at buying a flowmaster for sbc Camaro. After seeing your video I think I definitely want the super 10 now.@@BrannAutoMedia
Most K swapped Honda’s troll newer Camaro’s. So you’re probably gonna need a faster car if you’re actually going to try and troll high HP K swapped Hondas. Js, bud
Sounds good but drone city.
Flowmasters are actually "tuned" to drone as some like that, me not so much. I had mid deletes with the resonators on and it was nice but at times a bit too raspy, so i put the 10s on and it is perfect on my Scat Pack. The 10s give some nasty snarl but the resonators keep it civilized ;
I don’t see difference from 40 and 10 they r bout the same
The Super 10s gave it a much raspier bite on the high end and even the gurgle at idle is definitely different! Now that they are worn in, there is a major difference!
the 40 are larger cant you see? If you cant hear the difference, you might have a hearing problem. The super 10s are much more aggresive and slightly louder in the video.
Super tens....super loud..
Part # 842518 ???