SpeedyBee Mario5 Build w/ Moonlight Kit!
ฝัง
- เผยแพร่เมื่อ 22 มี.ค. 2024
- In our previous video we reviewed the Mario5 kit, an affordable and strong 5-inch frame featuring an obstruction free “dead cat” design . Today we’ll be doing a full assembly of the Mario5, and see if its right for you. For more info, check out: tinyurl.com/5n7bpp3a
If you got any help, information, or entertainment from this video, please consider sending us a Super Thanks or just hit the "LIKE" button. This directly supports the channel, and allows us to create even more amazing content. Thank You!
Buy The Mario5 Here: tinyurl.com/5n7bpp3a
Buy The Bee35 Here: tinyurl.com/z8ns56vd
Buy The Bee35 Frame: tinyurl.com/2f9dzmhv
Buy the SpeedyBee VRX Here: tinyurl.com/yc4knsp8
Buy the SpeedyBee VRX Here: tinyurl.com/yc72efpa
Buy the SB F405 V4 Stack Here: tinyurl.com/5n6dsctt
Buy the SB F405 Mini Stack Here: tinyurl.com/2tt9nvke
Buy the Moonlight Kit Here: tinyurl.com/mttzs8er
Buy The Avatar HD Goggles Here: tinyurl.com/4vurnhhs
Buy The Walksnail VRX Here: bit.ly/41rT6qW
Buy The Walksnail VRX Here: bit.ly/3KP8eYe
* All links are affiliated unless otherwise stated, and helps support the channel at no cost to you. Thanks
Join me on Instagram: / onemanunmanned
RELATED VIDEOS:
SpeedyBee Discharger: • SpeedyBee Discharger |...
SpeedyBee VRX: • SpeedyBee 5.8G VRX | G...
Nord5 HD: • Nord5 HD 1st Flight - ...
Pavo20: • BetaFPV Pavo20 | A Big...
Pavo Pico: • Pavo Pico - Mind Blowi...
Pavo25 HDZ: • PAVO25 1st Flight | So...
Pavo 30 Review: • BETAFPV Pavo30 | Setup...
#mario5 #speedybee #fpv - วิทยาศาสตร์และเทคโนโลยี
![☀ Дрон-пятёрка на DJI O3. Смена правил игры? [Speedybee Master 5 HD]](http://i.ytimg.com/vi/AP2R9yqADow/mqdefault.jpg)
Do you know what the difference is between this and Master 5?
Thanks for the video! I have almost the same setup. The Mario 5 frame with the moonlight kit. However, I have lots of jelly in the 4k footage the moonlight kit creates. I have a feeling the camera is too loose in the rubber brackets in front and it is rubber on rubber of the cam. The moonlight camera is really loose and I have a feeling this created the vibrations in the videofees as well specially when it are windy flying conditons (as it always is here in the netherlands). Are there people experiencing the same thing and/or is there perhaps a known solution to this? Perhaps a particular 3d print for a different camera mount?
I'm trying to install a walksnail vtx hd pro into this frame and the camera feels so loose no matter what I do
when am i going to fly I see the Video in the glasses with a lot of vibrations. Do you know what it is due to? Do you have any advice? greetings, good video.
ohh...just added a reply myself. I have a feeling we experience the same problem. Hope someone has a solution for this. Cause I use the moonlight kit to have a fpv drone I can use for good looking video, without mounting my gopro on top ;-)
Are there any advantages to props out?
iT KEEPS YOUR CAMERA CLEAN, AND TRASH OUT 80% OF THE TIME
Pretty much what IcefaceFPV said. It also pushes the drone off weeds, branches, even trees if and when it crashes (instead of getting wedged deeper).
Any disadvantages?
Great video! Just a suggestion, but I think you should consider ramping up the video's bitrate
Thanks
Nice build...lol...really quick its like nassquad....bigup yuself Thomas....I build to many 5" need some paco20 in ma bones....FAA coming'''lol
Yes sah….Give thanks. You dun know about the FAA.
With the camera pop out? Hell no...
switching the camera between you and the the drone was very much and annoying please focus on the build.